mirror/emacs
1
0
Fork 0
mirror of https://git.savannah.gnu.org/git/emacs.git synced 2024-12-16 09:50:25 +00:00
Code Issues Releases Activity
3122bee9f9
emacs/Makefile.in
Richard M. Stallman 7e5e0277f0 (top_distclean): Delete config.cache.
1995-04-13 04:56:20 +00:00

535 lines
20 KiB
Makefile
Raw Blame History

# DIST: This is the distribution Makefile for Emacs. configure can
# DIST: make most of the changes to this file you might want, so try
# DIST: that first.
# make all to compile and build Emacs.
# make install to install it.
# make TAGS to update tags tables.
#
# make clean or make mostlyclean
# Delete all files from the current directory that are normally
# created by building the program. Don't delete the files that
# record the configuration. Also preserve files that could be made
# by building, but normally aren't because the distribution comes
# with them.
#
# Delete `.dvi' files here if they are not part of the distribution.
#
# make distclean
# Delete all files from the current directory that are created by
# configuring or building the program. If you have unpacked the
# source and built the program without creating any other files,
# `make distclean' should leave only the files that were in the
# distribution.
#
# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: C source files
# produced by Bison, tags tables, info files, and so on.
#
# make extraclean
# Still more severe - delete backup and autosave files, too.
SHELL = /bin/sh
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
# ==================== Things `configure' Might Edit ====================
CC=@CC@
CPP=@CPP@
C_SWITCH_SYSTEM=@c_switch_system@
ALLOCA=@ALLOCA@
LN_S=@LN_S@
CFLAGS=@CFLAGS@
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
YACC=@YACC@
### These help us choose version- and architecture-specific directories
### to install files in.
### This should be the number of the Emacs version we're building,
### like `18.59' or `19.0'.
version=@version@
### This should be the name of the configuration we're building Emacs
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
# ==================== Where To Install Things ====================
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them. This defaults to /usr/local.
prefix=@prefix@
# Like `prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
bindir=@bindir@
# Where to install architecture-independent data files. ${lispdir}
# and ${etcdir} are subdirectories of this.
datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
# runs. These files are all architecture-independent. Right now, the
# only such data is the locking directory; ${lockdir} is a
# subdirectory of this.
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data. ${archlibdir} is a subdirectory of this.
libexecdir=@libexecdir@
# Where to install Emacs's man pages, and what extension they should have.
mandir=@mandir@
manext=.1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# since there are now many packages documented with the texinfo
# system, it is inappropriate to imply that it is part of Emacs.
infodir=@infodir@
# Where to look for bitmap files.
bitmapdir=@bitmapdir@
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's `--srcdir' option.
srcdir=@srcdir@
# Tell make where to find source files; this is needed for the makefiles.
VPATH=@srcdir@
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
# Where to install the lisp files distributed with
# Emacs. This includes the Emacs version, so that the
# lisp files for different versions of Emacs will install
# themselves in separate directories.
lispdir=@lispdir@
# Directories Emacs should search for lisp files specific
# to this site (i.e. customizations), before consulting
# ${lispdir}. This should be a colon-separated list of
# directories.
locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
lisppath=@lisppath@
# Where Emacs will search for its lisp files while
# building. This is only used during the process of
# compiling Emacs, to help Emacs find its lisp files
# before they've been installed in their final location.
# It's usually identical to lisppath, except that
# it does not include locallisppath, and the
# entry for the directory containing the installed lisp
# files has been replaced with ../lisp. This should be a
# colon-separated list of directories.
buildlisppath=${srcdir}/lisp
# Where to install the other architecture-independent
# data files distributed with Emacs (like the tutorial,
# the cookie recipes and the Zippy database). This path
# usually contains the Emacs version number, so the data
# files for multiple versions of Emacs may be installed
# at once.
etcdir=@etcdir@
# Where to create and expect the locking directory, where
# the Emacs locking code keeps track of which files are
# currently being edited.
lockdir=@lockdir@
# Where to put executables to be run by Emacs rather than
# the user. This path usually includes the Emacs version
# and configuration name, so that multiple configurations
# for multiple versions of Emacs may be installed at
# once.
archlibdir=@archlibdir@
# Where to put the docstring file.
docdir=@docdir@
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# ============================= Targets ==============================
# What emacs should be called when installed.
EMACS = emacs
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
SUBDIR = lib-src src
# The makefiles of the directories in $SUBDIR.
SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
# When installing the info files, we need to do special things to
# avoid nuking an existing dir file, so we don't do that here;
# instead, we have written out explicit code in the `install' targets.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = ${etcdir} ${lispdir}
all: paths-force ${SUBDIR}
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
# Note that sed is not in /bin on 386bsd.
src/paths.h: Makefile ${srcdir}/src/paths.h.in
@echo "Producing \`src/paths.h' from \`src/paths.h.in'."
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
sed < ${srcdir}/src/paths.h.in > paths.h.tmp$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
${srcdir}/move-if-change paths.h.tmp$$$$ src/paths.h
# For `make all',
# we force the rebuilding of src/paths.h because the user might give
# make different values for the various directories. Since we use
# move-if-change, src/paths.h only actually changes if the user did
# something notable, so the only unnecessary work we do is in building
# paths.h.tmp$$$$, which isn't much.
# Note that sed is not in /bin on 386bsd.
# We depend on src/paths.h here to prevent simultaneous execution of
# that rule and this one, in a parallel make.
# It is possible for paths.h to be updated twice--but that would happen anyway.
paths-force: FRC src/paths.h
@echo "Producing \`src/paths.h' from \`src/paths.h.in'."
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
sed < ${srcdir}/src/paths.h.in > paths.h.tmp$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
${srcdir}/move-if-change paths.h.tmp$$$$ src/paths.h
src: lib-src FRC src/paths.h
# This ought to depend on src/paths.h, so that in parallel make
# src/paths.h will be available for the compilations in lib-src.
# But that causes trouble in `make install' if a different prefix
# is specified at that time.
lib-src: FRC src/paths.h
.RECURSIVE: ${SUBDIR}
${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
cd $@; $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
blessmail: ${SUBDIR_MAKEFILES} src FRC
cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
MAKE='${MAKE}' archlibdir='$(archlibdir)'
Makefile: Makefile.in config.status
./config.status
src/Makefile: src/Makefile.in.in config.status
./config.status
lib-src/Makefile: lib-src/Makefile.in config.status
./config.status
oldXMenu/Makefile: oldXMenu/Makefile.in config.status
./config.status
lwlib/Makefile: lwlib/Makefile.in config.status
./config.status
# ==================== Installation ====================
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
## On AIX, use tar xBf.
## On Xenix, use tar xpf.
.PHONY: install mkdir
## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
## ever modify src/paths.h.
install: ${SUBDIR} install-arch-dep install-arch-indep blessmail;
### Note that we copy the DOC-* files from the build etc directory
### as well as lots of things from ${srcdir}/etc.
install-arch-dep: mkdir
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir})
${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
-chmod 1755 ${bindir}/emacs-${version}
rm -f ${bindir}/$(EMACS)
-ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
### Note that we copy the DOC-* files from the build etc directory
### as well as lots of things from ${srcdir}/etc.
install-arch-indep: mkdir
-set ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
rm -rf $$1 ; \
fi ; \
shift ; \
done
-set ${COPYDESTS} ; \
mkdir ${COPYDESTS} ; \
chmod ugo+rx ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
dest=$$1 ; shift ; \
[ -d $${dir} ] \
&& [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
&& (echo "Copying $${dir}..." ; \
(cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \
for subdir in `find $${dest} -type d ! -name RCS -print` ; do \
rm -rf $${subdir}/RCS ; \
rm -rf $${subdir}/CVS ; \
rm -f $${subdir}/\#* ; \
rm -f $${subdir}/.\#* ; \
rm -f $${subdir}/*~ ; \
rm -f $${subdir}/*.orig ; \
done) ; \
done
-rm -f ${lispdir}/subdirs.el
$(srcdir)/update-subdirs ${lispdir}
if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
then \
echo "Copying etc/DOC-* ..." ; \
(cd etc; tar -cf - DOC-*)|(cd ${docdir}; umask 0; tar -xvf - ); \
else true; fi
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
then \
(cd ${srcdir}/info ; \
if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \
(cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
fi ; \
for f in cl* dired-x* emacs* forms* gnus* info* sc* vip* ; do \
(cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
done); \
else true; fi
thisdir=`/bin/pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \
(cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \
done
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
mkdir: FRC
$(srcdir)/mkinstalldirs ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
${bindir} ${datadir} ${docdir} ${libexecdir} \
`echo ${locallisppath} | sed 's/:/ /g'`
-chmod 777 ${lockdir}
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would
### create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall:
(cd lib-src; \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
for dir in ${lispdir} ${etcdir} ; do \
if [ -d $${dir} ]; then \
case `(cd $${dir} ; /bin/pwd)` in \
`(cd ${srcdir} ; /bin/pwd)`* ) ;; \
* ) rm -rf $${dir} ;; \
esac ; \
case $${dir} in \
${datadir}/emacs/${version}/* ) \
rm -rf ${datadir}/emacs/${version} \
;; \
esac ; \
fi ; \
done
(cd ${infodir} && rm -f cl* emacs* forms* info* vip*)
(cd ${mandir} && rm -f emacs.1 etags.1 ctags.1)
(cd ${bindir} && rm -f emacs-${version} $(EMACS))
FRC:
# ==================== Cleaning up and miscellanea ====================
.PHONY: mostlyclean clean distclean maintainer-clean extraclean
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
### normally don't want to recompile. For example, the `mostlyclean'
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean: FRC
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
-(cd man && $(MAKE) $(MFLAGS) mostlyclean)
### `clean'
### Delete all files from the current directory that are normally
### created by building the program. Don't delete the files that
### record the configuration. Also preserve files that could be made
### by building, but normally aren't because the distribution comes
### with them.
###
### Delete `.dvi' files here if they are not part of the distribution.
clean: FRC
(cd src; $(MAKE) $(MFLAGS) clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
-(cd man && $(MAKE) $(MFLAGS) clean)
### `distclean'
### Delete all files from the current directory that are created by
### configuring or building the program. If you have unpacked the
### source and built the program without creating any other files,
### `make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
rm -f config.status config.cache ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
(cd lock && rm -f *)
distclean: FRC
(cd src; $(MAKE) $(MFLAGS) distclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
(cd man && $(MAKE) $(MFLAGS) distclean)
${top_distclean}
### `maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
### One exception, however: `make maintainer-clean' should not delete
### `configure' even if `configure' can be remade using a rule in the
### Makefile. More generally, `make maintainer-clean' should not delete
### anything that needs to exist in order to run `configure' and then
### begin to build the program.
maintainer-clean: FRC
(cd src; $(MAKE) $(MFLAGS) maintainer-clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
-(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
### says GCC supports it, and that's where the configuration part of
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
-(cd lock && rm *)
-rm config.status config-tmp-*
-rm -f *~ \#*
### Unlocking and relocking. The idea of these productions is to reduce
### hassles when installing an incremental tar of Emacs. Do `make unlock'
### before unlocking the file to take the write locks off all sources so
### that tar xvof will overwrite them without fuss. Then do `make relock'
### afterward so that VC mode will know which files should be checked in
### if you want to mung them.
###
### Note: it's no disaster if these productions miss a file or two; tar
### and VC will swiftly let you know if this happens, and it is easily
### corrected.
SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
README configure make-dist move-if-change
.PHONY: unlock relock
unlock:
chmod u+w $(SOURCES) cpp/*
-(cd elisp; chmod u+w Makefile README *.texi)
(cd etc; $(MAKE) $(MFLAGS) unlock)
(cd lib-src; $(MAKE) $(MFLAGS) unlock)
(cd lisp; $(MAKE) $(MFLAGS) unlock)
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
(cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) unlock)
relock:
chmod u-w $(SOURCES) cpp/*
-(cd elisp; chmod u-w Makefile README *.texi)
(cd etc; $(MAKE) $(MFLAGS) relock)
(cd lib-src; $(MAKE) $(MFLAGS) relock)
(cd lisp; $(MAKE) $(MFLAGS) relock)
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
(cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) relock)
TAGS tags: lib-src
cd ${srcdir}/src; $(MAKE) tags
check:
@echo "We don't have any tests for GNU Emacs yet."
dist:
$(srcdir)/update-subdirs ${srcdir}/lisp
cd ${srcdir}; make-dist
.PHONY: info dvi dist check
force-info:
info: force-info
(cd ${srcdir}/man; $(MAKE) $(MFLAGS) info)
dvi:
(cd man; $(MAKE) $(MFLAGS) dvi)
Reference in New Issue View Git Blame Copy Permalink