1
0
mirror of https://git.savannah.gnu.org/git/emacs.git synced 2024-12-14 09:39:42 +00:00
emacs/Makefile.in
Paul Eggert b5376e0ebd Skip tests if test subdir is missing
Problem reported by Jeffrey Walton in:
https://lists.gnu.org/r/emacs-devel/2019-05/msg00041.html
* Makefile.in (CHECK_TARGETS): New macro; use it
to simplify 'check' and similar rules.
($(CHECK_TARGETS)): If tests are missing, do not fail
after issuing a diagnostic.  Just skip the tests.
2019-05-03 14:54:38 -07:00

1188 lines
44 KiB
Makefile

### @configure_input@
# Copyright (C) 1992-2019 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with GNU Emacs. If not, see <https://www.gnu.org/licenses/>.
### Commentary:
# make all to compile and build Emacs.
# make install to install it.
# make TAGS to update tags tables.
#
# make clean or make mostlyclean
# Delete all files from the current directory that are normally
# created by building the program. Don't delete the files that
# record the configuration. Also preserve files that could be made
# by building, but normally aren't because the distribution comes
# with them.
#
# Delete '.dvi' files here if they are not part of the distribution.
#
# make distclean
# Delete all files from the current directory that are created by
# configuring or building the program. If you have unpacked the
# source and built the program without creating any other files,
# 'make distclean' should leave only the files that were in the
# distribution.
#
# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: .elc files,
# C source files produced by Bison, tags tables, info files,
# and so on.
#
# make extraclean
# Still more severe - delete backup and autosave files, too.
# Also generated files that do not normally change and can be slow
# to rebuild (eg leim/ja-dic).
#
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# clean slate, and then build in the normal way.
#
# make docs
# Make Emacs documentation files from their sources; requires makeinfo.
#
# make check (or check-expensive or check-all)
# Run the Emacs test suite.
# check-expensive includes additional tests that can be slow.
# check-all runs all tests, including ones that can be slow, or
# fail unpredictably
SHELL = @SHELL@
DUMPING=@DUMPING@
# This only matters when inheriting a CDPATH not starting with the
# current directory.
CDPATH=
# ==================== Things 'configure' Might Edit ====================
cache_file = @cache_file@
CONFIGURE_FLAGS = --cache-file=$(cache_file)
AWK = @AWK@
EXEEXT=@EXEEXT@
### These help us choose version- and architecture-specific directories
### to install files in.
### This should be the number of the Emacs version we're building,
### like '24.5' or '25.0.50'.
version=@version@
### This should be the name of the configuration we're building Emacs
### for, like 'x86_64-unknown-linux-gnu' or 'powerpc-ibm-aix7.1.2.0'.
configuration=@configuration@
### The nt/ subdirectory gets built only for MinGW
NTDIR=@NTDIR@
# 'make' verbosity.
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
# ==================== Where To Install Things ====================
# Location to install Emacs.app under GNUstep / macOS.
# Later values may use these.
ns_appbindir=@ns_appbindir@
ns_appresdir=@ns_appresdir@
# Either yes or no depending on whether this is a relocatable Emacs.app.
ns_self_contained=@ns_self_contained@
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them. This defaults to /usr/local.
prefix=@prefix@
# Like 'prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
bindir=@bindir@
# The root of the directory tree for read-only architecture-independent
# data files. ${datadir}, ${infodir} and ${mandir} are based on this.
datarootdir=@datarootdir@
# Where to install architecture-independent data files. ${lispdir}
# and ${etcdir} are subdirectories of this.
datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
# runs. These files are all architecture-independent.
# Right now, this is not used.
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users (and other architecture-dependent
# data, although Emacs does not have any). The executables
# are actually installed in ${archlibdir}, which is (normally)
# a subdirectory of this.
libexecdir=@libexecdir@
# Currently only used for the systemd service file.
libdir=@libdir@
# Where to install emacs-module.h.
includedir=@includedir@
# Where to install Emacs's man pages.
# Note they contain cross-references that expect them to be in section 1.
mandir=@mandir@
man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs.
infodir=@infodir@
# Info files not in the doc/misc directory (we get those via make echo-info).
INFO_NONMISC=emacs.info eintr.info elisp.info
# If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
HAVE_MAKEINFO=@HAVE_MAKEINFO@
# Directory for local state files for all programs.
localstatedir=@localstatedir@
# Where to look for bitmap files.
bitmapdir=@bitmapdir@
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's '--srcdir' option.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
abs_srcdir=@abs_srcdir@
# Where the manpage source files are kept.
mansrcdir=$(srcdir)/doc/man
# Tell make where to find source files; this is needed for the makefiles.
VPATH=@srcdir@
# Where to find the application default.
x_default_search_path=@x_default_search_path@
# Where the etc/emacs.desktop file is to be installed.
desktopdir=$(datarootdir)/applications
# Where the etc/emacs.appdata.xml file is to be installed.
appdatadir=$(datarootdir)/metainfo
# Where the etc/emacs.service file is to be installed.
# The system value (typically /usr/lib/systemd/user) can be
# obtained with: pkg-config --variable=systemduserunitdir systemd
# but that does not respect configure's prefix.
# It is not clear where we should install this file when
# prefix != /usr (or /usr/local?) (eg for non-root installs).
# Other options include ~/.config/systemd/user/,
# $XDG_RUNTIME_DIR/systemd/user/
# It seems the user may end up having to make a manual link...
systemdunitdir=$(libdir)/systemd/user
# Where the etc/images/icons/hicolor directory is to be installed.
icondir=$(datarootdir)/icons
# The source directory for the icon files.
iconsrcdir=$(srcdir)/etc/images/icons
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
# Where to install the lisp files distributed with Emacs.
# This includes the Emacs version, so that the lisp files for different
# versions of Emacs will install themselves in separate directories.
lispdir=@lispdir@
# Directories Emacs should search for standard lisp files.
# The default is ${lispdir}.
standardlisppath=@standardlisppath@
# Directories Emacs should search for lisp files specific to this
# site (i.e. customizations), before consulting ${standardlisppath}.
# This should be a colon-separated list of directories.
locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
# Where Emacs will search for its lisp files while building.
# This is only used during the process of compiling Emacs,
# to help Emacs find its lisp files before they've been installed
# in their final location.
# This should be a colon-separated list of directories.
# Normally it points to the lisp/ directory in the sources.
# NB lread.c relies on lisp/ being first here.
buildlisppath=${abs_srcdir}/lisp
# Where to install the other architecture-independent
# data files distributed with Emacs (like the tutorial,
# the cookie recipes and the Zippy database). This path
# usually contains the Emacs version number, so the data
# files for multiple versions of Emacs may be installed
# at once.
etcdir=@etcdir@
# Where to put executables to be run by Emacs rather than
# the user. This path usually includes the Emacs version
# and configuration name, so that multiple configurations
# for multiple versions of Emacs may be installed at
# once.
archlibdir=@archlibdir@
# Where to put the etc/DOC file.
etcdocdir=@etcdocdir@
# User or group of the auxiliary program update-game-score, which is
# installed on platforms with a game directory shared by multiple users.
# On other platforms Emacs can update the score files itself.
gameuser=@gameuser@
gamegroup=@gamegroup@
# Where to install game score files, if gameuser or gamegroup is nonempty.
gamedir=@gamedir@
# Nonempty if and only if a shared gamedir is used.
use_gamedir=$(gameuser)$(gamegroup)
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
# Note that if the system does not provide a suitable install,
# configure will use build-aux/install-sh. Annoyingly, it does
# not use an absolute path. So we must take care to always run
# INSTALL-type commands from the directory containing the Makefile.
# This explains (I think) the cd thisdir seen in several install rules.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_INFO = @INSTALL_INFO@
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
MKDIR_P = @MKDIR_P@
# Create a link to a file in the same directory as the target.
LN_S_FILEONLY = @LN_S_FILEONLY@
# We use gzip to compress installed .el and some .txt files.
GZIP_PROG = @GZIP_PROG@
# ============================= Targets ==============================
# Program name transformation.
TRANSFORM = @program_transform_name@
# What emacs should be called when installed.
EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
EMACS = ${EMACS_NAME}${EXEEXT}
EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
SUBDIR = $(NTDIR) lib lib-src src lisp
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
SUBDIR_MAKEFILES = $(patsubst ${srcdir}/%,%,${SUBDIR_MAKEFILES_IN:.in=})
# Non-makefile files created by config.status.
CONFIG_STATUS_FILES_IN = \
${srcdir}/nt/emacs.rc.in ${srcdir}/nt/emacsclient.rc.in \
${srcdir}/doc/man/emacs.1.in ${srcdir}/src/emacs-module.h.in \
${srcdir}/src/module-env-*.h
# Subdirectories to install, and where they'll go. lib-src's and nt's
# makefiles know how to install them, so we don't do that here.
# Directories that cannot simply be copied, eg info, are treated
# separately.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}"
all: ${SUBDIR} info
.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 etc-emacsver
# If configure were to just generate emacsver.tex from emacsver.tex.in
# in the normal way, the timestamp of emacsver.tex would always be
# newer than that of the pdf files, which are prebuilt in release tarfiles.
# So we use this rule, and move-if-change, to avoid that.
etc-emacsver:
majorversion=`echo ${version} | sed 's/\..*//'`; \
sed "s/[@]majorversion@/$${majorversion}/" \
${srcdir}/etc/refcards/emacsver.tex.in > emacsver.tex.$$$$ && \
${srcdir}/build-aux/move-if-change emacsver.tex.$$$$ \
${srcdir}/etc/refcards/emacsver.tex
# The shared gamedir name as a C string literal, or a null ptr if not in use.
PATH_GAME = $(if $(use_gamedir),"$(gamedir)",((char const *) 0))
# Generate epaths.h from epaths.in. This target is invoked by 'configure'.
# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
epaths-force:
@for dir in '$(abs_srcdir)' '$(lispdir)' '$(archlibdir)'; do \
case $$dir in \
*:*) \
printf >&2 "Build or installation directory '%s'\\n" "$$dir"; \
echo >&2 "cannot contain ':'."; \
exit 1;; \
esac; \
done
@(gamedir='${gamedir}'; \
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "${standardlisppath}";' \
-e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "${locallisppath}";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "${buildlisppath}";' \
-e '/^#define PATH_[^ ]*SEARCH /s/\([":]\):*/\1/g' \
-e '/^#define PATH_[^ ]*SEARCH /s/:"/"/' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
-e 's;\(#.*PATH_GAME\).*$$;\1 $(PATH_GAME);' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
# The w32 build needs a slightly different editing, and it uses
# nt/epaths.nt as the template.
#
# Use the value of ${locallisppath} supplied by 'configure',
# to support the --enable-locallisppath argument.
#
# In this case, the paths written to 'src/epaths.h' must be in native
# MS-Windows format (e.g. 'c:/foo/bar'), because temacs is a MinGW
# program that doesn't support MSYS-style paths (e.g. '/c/foo/bar' or
# '/foo/bar').
epaths-force-w32:
@(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${abs_srcdir}"`; \
w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}"`; \
w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}"` ; \
w32locallisppath=$${w32locallisppath//$${w32prefix}/"%emacs_dir%"} ; \
sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
-e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath//;/\\;}"'";' \
-e '/^.*#/s/@VER@/${version}/g' \
-e '/^.*#/s/@CFG@/${configuration}/g' \
-e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
lib-src src: $(NTDIR) lib
src: lib-src
# We need to build 'emacs' in 'src' to compile the *.elc files in 'lisp'.
lisp: src
# These targets should be "${SUBDIR} without 'src'".
lib lib-src lisp nt: Makefile
$(MAKE) -C $@ all
# Ideally, VCSWITNESS should be a file that is modified whenever the
# repository registers a commit from either a local checkin or a
# repository pull. In git there is no single file that guarantees
# this, but the local log for the current head should be close enough.
#
# Pass an unexpanded $srcdir to src's Makefile, which then
# expands it using its own value of srcdir (which points to the
# source directory of src/).
dirstate = .git/logs/HEAD
VCSWITNESS = $(if $(wildcard $(srcdir)/$(dirstate)),$$(srcdir)/../$(dirstate))
src: Makefile
$(MAKE) -C $@ VCSWITNESS='$(VCSWITNESS)' all
blessmail: Makefile src
$(MAKE) -C lib-src maybe-blessmail
# We used to have one rule per */Makefile.in, but that leads to race
# conditions with parallel makes, so assume that the timestamp on
# ./Makefile represents the timestamp on all the other Makefiles.
# Similarly, assume the timestamp on ./configure represents the
# timestamp on src/config.in.
#
# config.status overrides MAKEFILE_NAME with a bogus name when creating
# src/epaths.h, so that 'make epaths-force' does not recursively invoke
# config.status and overwrite config.status while executing it (Bug#11214).
#
# 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
# then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
# etc. to be built without running into similar recursion problems.
MAKEFILE_NAME = Makefile
$(MAKEFILE_NAME): config.status $(srcdir)/configure \
$(srcdir)/lib/gnulib.mk.in \
$(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(CONFIG_STATUS_FILES_IN)
MAKE='$(MAKE)' ./config.status
# Don't erase these files if make is interrupted while refreshing them.
.PRECIOUS: Makefile config.status
config.status: ${srcdir}/configure
if [ -x ./config.status ]; then \
$(CFG) ./config.status --recheck; \
else \
$(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
fi
$(srcdir)/configure: $(srcdir)/configure.ac $(srcdir)/m4/*.m4
cd $(srcdir) && ./autogen.sh autoconf
# ==================== Installation ====================
.PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
.PHONY: install-man install-etc install-strip install-$(NTDIR)
.PHONY: uninstall uninstall-$(NTDIR)
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
@true
## Ensure that $subdir contains a subdirs.el file.
## Here and elsewhere, we set the umask so that any created files are
## world-readable.
## TODO it might be good to warn about non-standard permissions of
## pre-existing directories, but that does not seem easy.
write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \
then true; \
else \
umask 022; \
${MKDIR_P} "$${subdir}"; \
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
echo " (normal-top-level-add-subdirs-to-load-path))") \
> "$${subdir}/subdirs.el"; \
fi
### Install the executables that were compiled specifically for this machine.
### We do install-arch-indep first because the executable needs the
### Lisp files and DOC file to work properly.
install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
$(MAKE) -C lib-src install
ifeq (${ns_self_contained},no)
${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)"
ifeq (${DUMPING},pdumper)
${INSTALL_DATA} src/emacs.pdmp "$(DESTDIR)${libexecdir}/emacs/${version}/${configuration}"/emacs.pdmp
endif
-chmod 755 "$(DESTDIR)${bindir}/$(EMACSFULL)"
ifndef NO_BIN_LINK
rm -f "$(DESTDIR)${bindir}/$(EMACS)"
cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) "$(EMACSFULL)" "$(EMACS)"
endif
else
subdir=${ns_appresdir}/site-lisp && ${write_subdir}
rm -rf ${ns_appresdir}/share
endif
### Windows-specific install target for installing programs produced
### in nt/, and its Posix do-nothing shadow.
install-:
install-nt:
$(MAKE) -C $(NTDIR) install
## In the share directory, we are deleting:
## applications (with emacs.desktop, also found in etc/)
## emacs (basically empty except for unneeded site-lisp directories)
## icons (duplicates etc/images/icons/hicolor)
## This is install-etc for everything except self-contained-ns builds.
## For them, it is empty.
INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
## https://lists.gnu.org/r/emacs-devel/2007-10/msg01672.html
## Needs to be the user running install, so configure can't set it.
set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
`(id -u) 2> /dev/null`; do \
[ -n "$${installuser}" ] && break ; \
done; \
installgroup=`(id -g) 2>/dev/null` && [ -n "$$installgroup" ] && \
installuser=$$installuser:$$installgroup
### Install the files that are machine-independent.
### Most of them come straight from the distribution; the exception is
### the DOC file, which is copied from the build directory.
## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
## We delete etc/DOC* because there may be irrelevant DOC files from
## other builds in the source directory. This is ok because we just
## deleted the entire installed etc/ directory and recreated it.
## install-etcdoc installs the relevant DOC.
## Note that we install etc/refcards/*.ps if present.
## TODO we should compress these if GZIP_PROG is set.
## It would be simpler to have a separate install rule for etc/refcards
## (maybe move it to doc/refcards?).
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
## We always create the _default_ locallisppath directories, and
## ensure that they contain a subdirs.el file (via write_subdir).
## This is true even if locallisppath has a non-default value.
## In case of non-default value, we used to create the specified directories,
## but not add subdirs.el to them. This was a strange halfway house.
## Nowadays we do not create non-default directories.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## https://lists.gnu.org/r/emacs-devel/2012-05/msg00278.html
## I have no idea which platforms Emacs supports where cp -R does not
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## https://lists.gnu.org/r/autoconf-patches/2004-11/msg00005.html
install-arch-indep: lisp install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
umask 022 && $(MKDIR_P) "$(DESTDIR)$(includedir)"
$(INSTALL_DATA) src/emacs-module.h "$(DESTDIR)$(includedir)/emacs-module.h"
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
[ -d $${dir} ] || exit 1 ; \
dest="$$1" ; shift ; \
if [ -d "$${dest}" ]; then \
exp_dest=`cd "$${dest}" && /bin/pwd`; \
[ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
else true; \
fi; \
rm -rf "$${dest}" ; \
umask 022; ${MKDIR_P} "$${dest}" ; \
printf 'Copying %s to %s...\n' "$$dir" "$$dest" ; \
(cd $${dir}; tar -chf - . ) \
| (cd "$${dest}"; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
if [ "$${dir}" = "${srcdir}/etc" ]; then \
rm -f "$${dest}/DOC"* ; \
rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \
rm -f "$${dest}/refcards"/*.log "$${dest}/refcards"/*.in; \
else true; \
fi; \
(cd "$${dest}" || exit 1; \
for subdir in `find . -type d -print` ; do \
chmod a+rx $${subdir} ; \
rm -f $${subdir}/.gitignore ; \
rm -f $${subdir}/.arch-inventory ; \
rm -f $${subdir}/.DS_Store ; \
rm -f $${subdir}/#* ; \
rm -f $${subdir}/.#* ; \
rm -f $${subdir}/*~ ; \
rm -f $${subdir}/*.orig ; \
rm -f $${subdir}/ChangeLog* ; \
[ "$${dir}" != "${srcdir}/etc" ] && \
rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
done ); \
find "$${dest}" -exec chown $${installuser} {} ';' ;\
done
-rm -f "$(DESTDIR)${lispdir}/subdirs.el"
umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
${write_subdir}
subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
${write_subdir} || true
[ -z "${GZIP_PROG}" ] || { \
echo "Compressing *.el etc. ..." && \
cd "$(DESTDIR)${lispdir}" && \
for f in `find . -name "*.elc" -print | sed 's/.elc$$/.el/'`; do \
${GZIP_PROG} -9n "$$f"; \
done; \
${GZIP_PROG} -9n "../etc/publicsuffix.txt"; \
}
-chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
## The above chmods are needed because "umask 022; tar ..." is not
## guaranteed to do the right thing; eg if we are root and tar is
## preserving source permissions.
## Note that install-arch-indep deletes and recreates the entire
## installed etc/ directory, so we need it to run before this does.
install-etcdoc: src install-arch-indep
-unset CDPATH; \
umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \
if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
then \
docfile="DOC"; \
printf 'Copying %s to %s ...\n' "etc/$$docfile" \
"$(DESTDIR)${etcdocdir}"; \
${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
$(set_installuser); \
chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
else true; fi
## FIXME:
## If info/dir is missing, but we have install-info, we should let
## that handle it. If info/dir is present and we do not have install-info,
## we should check for missing entries and add them by hand.
##
## FIXME:
## If HAVE_MAKEINFO = no and there are no info files, do not install info/dir.
install-info: info
umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
-unset CDPATH; \
thisdir=`/bin/pwd`; \
exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \
if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
true; \
else \
[ -f "$(DESTDIR)${infodir}/dir" ] || \
[ ! -f ${srcdir}/info/dir ] || \
${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir"; \
info_misc=`$(MAKE) --no-print-directory -s -C doc/misc echo-info`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
(cd "$${thisdir}"; \
${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \
[ -n "${GZIP_PROG}" ] || continue ; \
rm -f "$(DESTDIR)${infodir}/$$f.gz"; \
${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \
done; \
(cd "$${thisdir}"; \
${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
done; \
fi
## "gzip || true" is because some gzips exit with non-zero status
## if compression would not reduce the file size. Eg, the gzip in
## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
## only happen with the tiny ctags.1 manpage. We don't really care if
## ctags.1 is compressed or not. "gzip -f" is another option here,
## but not sure if portable.
install-man:
umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}"
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
test "$$page" = ChangeLog.1 && continue; \
dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
(cd "$${thisdir}"; \
${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
[ -n "${GZIP_PROG}" ] || continue ; \
rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \
${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \
done
## Install those items from etc/ that need to end up elsewhere.
## If you prefer, choose "emacs22" at installation time.
## Note: emacs22 does not have all the resolutions.
EMACS_ICON=emacs
install-etc:
umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}"
tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
sed -e "/^Exec=emacs/ s/emacs/${EMACS_NAME}/" \
-e "/^Icon=emacs/ s/emacs/${EMACS_NAME}/" \
${srcdir}/etc/emacs.desktop > $${tmp}; \
${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \
rm -f $${tmp}
umask 022; ${MKDIR_P} "$(DESTDIR)${appdatadir}"
tmp=etc/emacs.tmpappdata; rm -f $${tmp}; \
sed -e "s/emacs\.desktop/${EMACS_NAME}.desktop/" \
${srcdir}/etc/emacs.appdata.xml > $${tmp}; \
${INSTALL_DATA} $${tmp} "$(DESTDIR)${appdatadir}/${EMACS_NAME}.appdata.xml"; \
rm -f $${tmp}
umask 022; $(MKDIR_P) "$(DESTDIR)$(systemdunitdir)"
tmp=etc/emacs.tmpservice; rm -f $${tmp}; \
client_name=`echo emacsclient | sed '$(TRANSFORM)'`${EXEEXT}; \
sed -e '/^##/d' \
-e "/^Documentation/ s/emacs(1)/${EMACS_NAME}(1)/" \
-e "/^ExecStart/ s|emacs|${bindir}/${EMACS}|" \
-e "/^ExecStop/ s|emacsclient|${bindir}/$${client_name}|" \
${srcdir}/etc/emacs.service > $${tmp}; \
$(INSTALL_DATA) $${tmp} "$(DESTDIR)$(systemdunitdir)/${EMACS_NAME}.service"; \
rm -f $${tmp}
thisdir=`/bin/pwd`; \
cd ${iconsrcdir} || exit 1; umask 022 ; \
for dir in */*/apps */*/mimetypes; do \
[ -d $${dir} ] || continue ; \
( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \
for icon in $${dir}/${EMACS_ICON}[.-]*; do \
[ -r $${icon} ] || continue ; \
ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\\.$${ext}\$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
( cd "$${thisdir}"; \
${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
|| exit 1; \
done ; \
done
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) INSTALL_STRIP=-s install
### Delete all the installed files that the 'install' target would
### create (but not the noninstalled files such as 'make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall: uninstall-$(NTDIR) uninstall-doc
rm -f "$(DESTDIR)$(includedir)/emacs-module.h"
$(MAKE) -C lib-src uninstall
-unset CDPATH; \
for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do \
if [ -d "$${dir}" ]; then \
case `cd "$${dir}" ; /bin/pwd` in \
"`cd ${srcdir} ; /bin/pwd`"* ) ;; \
* ) rm -rf "$${dir}" ;; \
esac ; \
case "$${dir}" in \
"$(DESTDIR)${datadir}/emacs/${version}"/* ) \
rm -rf "$(DESTDIR)${datadir}/emacs/${version}" \
;; \
esac ; \
fi ; \
done
-rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}"
thisdir=`/bin/pwd`; \
(info_misc=`$(MAKE) --no-print-directory -s -C doc/misc echo-info`; \
if cd "$(DESTDIR)${infodir}"; then \
for elt in ${INFO_NONMISC} $${info_misc}; do \
(cd "$${thisdir}"; \
$(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
if [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
done; \
fi)
(if [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
if cd ${mansrcdir}; then \
for page in *.1; do \
rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
fi)
rm -f "$(DESTDIR)${bindir}/$(EMACS)" "$(DESTDIR)${bindir}/$(EMACSFULL)"
(if cd "$(DESTDIR)${icondir}"; then \
rm -f hicolor/*x*/apps/"${EMACS_NAME}.png" \
"hicolor/scalable/apps/${EMACS_NAME}.svg" \
"hicolor/scalable/apps/${EMACS_NAME}.ico" \
"hicolor/scalable/mimetypes/${EMACS_NAME}-document.svg" \
"hicolor/scalable/mimetypes/${EMACS_NAME}-document23.svg"; \
fi)
-rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"
-rm -f "$(DESTDIR)${appdatadir}/${EMACS_NAME}.appdata.xml"
-rm -f "$(DESTDIR)$(systemdunitdir)/${EMACS_NAME}.service"
ifneq (,$(use_gamedir))
for file in snake-scores tetris-scores; do \
file="$(DESTDIR)${gamedir}/$${file}"; \
[ -s "$${file}" ] || rm -f "$$file"; \
done
endif
### Windows-specific uninstall target for removing programs produced
### in nt/, and its Posix do-nothing shadow.
uninstall-:
uninstall-nt:
$(MAKE) -C $(NTDIR) uninstall
# ==================== Cleaning up and miscellanea ====================
.PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
## Eg:
## src_clean:
## make -C src clean
define submake_template
.PHONY: $(1)_$(2)
$(1)_$(2):
$$(MAKE) -C $(1) $(2)
endef
### 'mostlyclean'
### Like 'clean', but may refrain from deleting a few files that people
### normally don't want to recompile. For example, the 'mostlyclean'
### target for GCC does not delete 'libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean_dirs = src oldXMenu lwlib lib lib-src nt doc/emacs doc/misc \
doc/lispref doc/lispintro
$(foreach dir,$(mostlyclean_dirs),$(eval $(call submake_template,$(dir),mostlyclean)))
mostlyclean: $(mostlyclean_dirs:=_mostlyclean)
[ ! -d test ] || $(MAKE) -C test $@
### 'clean'
### Delete all files from the current directory that are normally
### created by building the program. Don't delete the files that
### record the configuration. Also preserve files that could be made
### by building, but normally aren't because the distribution comes
### with them.
###
### Delete '.dvi' files here if they are not part of the distribution.
clean_dirs = $(mostlyclean_dirs) nextstep
$(foreach dir,$(clean_dirs),$(eval $(call submake_template,$(dir),clean)))
clean: $(clean_dirs:=_clean)
$(MAKE) -C admin/charsets $@
[ ! -d test ] || $(MAKE) -C test $@
-rm -f ./*.tmp etc/*.tmp*
-rm -rf info-dir.*
### 'bootclean'
### Delete all files that need to be remade for a clean bootstrap.
top_bootclean=\
rm -f config.cache config.log ${srcdir}/doc/man/emacs.1
### 'distclean'
### Delete all files from the current directory that are created by
### configuring or building the program. If you have unpacked the
### source and built the program without creating any other files,
### 'make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
${top_bootclean}; \
rm -f config.status config.log~ \
Makefile makefile lib/gnulib.mk ${SUBDIR_MAKEFILES}
distclean_dirs = $(clean_dirs) leim lisp
$(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),distclean)))
maybeclean_dirs = test admin/grammars admin/unidata admin/charsets
distclean: $(distclean_dirs:=_distclean)
for dir in $(filter-out test,$(maybeclean_dirs)); do \
$(MAKE) -C $$dir $@ || exit; \
done
[ ! -d test ] || $(MAKE) -C test $@
${top_distclean}
### 'bootstrap-clean'
### Delete everything that can be reconstructed by 'make' and that
### needs to be deleted in order to force a bootstrap from a clean state.
$(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),bootstrap-clean)))
bootstrap-clean: $(distclean_dirs:=_bootstrap-clean)
for dir in $(filter-out test,$(maybeclean_dirs)); do \
$(MAKE) -C $$dir $@ || exit; \
done
[ ! -d test ] || $(MAKE) -C test $@
[ ! -f config.log ] || mv -f config.log config.log~
rm -rf ${srcdir}/info
rm -f ${srcdir}/etc/refcards/emacsver.tex
${top_bootclean}
### 'maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
### One exception, however: 'make maintainer-clean' should not delete
### 'configure' even if 'configure' can be remade using a rule in the
### Makefile. More generally, 'make maintainer-clean' should not delete
### anything that needs to exist in order to run 'configure' and then
### begin to build the program.
top_maintainer_clean=\
${top_distclean}; \
rm -fr autom4te.cache
maintainer_clean_dirs = src leim lisp
$(foreach dir,$(maintainer_clean_dirs),$(eval $(call submake_template,$(dir),maintainer-clean)))
maintainer-clean: bootstrap-clean $(maintainer_clean_dirs:=_maintainer-clean)
for dir in $(filter-out test,$(maybeclean_dirs)); do \
$(MAKE) -C $$dir $@ || exit; \
done
[ ! -d test ] || $(MAKE) -C test $@
${top_maintainer_clean}
### This doesn't actually appear in the coding standards, but Karl
### says GCC supports it, and that's where the configuration part of
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
### Note that we abuse this in some subdirectories (eg leim),
### to delete some generated files that are slow to rebuild.
extraclean_dirs = ${NTDIR} lib-src src leim \
admin/charsets admin/grammars admin/unidata
$(foreach dir,$(extraclean_dirs),$(eval $(call submake_template,$(dir),extraclean)))
extraclean: $(extraclean_dirs:=_extraclean)
${top_maintainer_clean}
-rm -f config-tmp-*
-rm -f ./*~ \#*
# The src subdir knows how to do the right thing
# even when the build directory and source dir are different.
.PHONY: TAGS tags
# FIXME: We used to include `src` in the dependencies, not sure why.
# I removed it because it causes `make tags` to build Emacs.
TAGS tags: lib lib-src # src
$(MAKE) -C src tags
CHECK_TARGETS = check check-maybe check-expensive check-all
.PHONY: $(CHECK_TARGETS)
$(CHECK_TARGETS): all
ifeq ($(wildcard test),test)
$(MAKE) -C test $@
else
@echo "You do not seem to have the test/ directory."
@echo "Maybe you used a release tarfile that lacks tests."
endif
dist:
cd ${srcdir}; ./make-dist
DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
HTMLS = lispref-html lispintro-html emacs-html misc-html
INFOS = lispref-info lispintro-info emacs-info misc-info
PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
PSS = lispref-ps lispintro-ps emacs-ps misc-ps
DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
$(DOCS):
$(MAKE) -C doc/$(subst -, ,$@)
.PHONY: $(DOCS) docs pdf ps
.PHONY: info dvi dist html info-real info-dir check-info
## TODO add etc/refcards.
docs: $(DOCS)
dvi: $(DVIS)
html: $(HTMLS)
info-real: $(INFOS)
pdf: $(PDFS)
ps: $(PSS)
info-dir: ${srcdir}/info/dir
## Hopefully doc/misc/*.texi is not too long for some systems?
srcdir_doc_info_dir_inputs = \
${srcdir}/doc/emacs/emacs.texi \
${srcdir}/doc/lispintro/emacs-lisp-intro.texi \
${srcdir}/doc/lispref/elisp.texi \
$(sort $(wildcard ${srcdir}/doc/misc/*.texi))
info_dir_inputs = \
../build-aux/dir_top \
$(subst ${srcdir}/doc/,,${srcdir_doc_info_dir_inputs})
info_dir_deps = \
${srcdir}/build-aux/make-info-dir \
${srcdir}/build-aux/dir_top \
${srcdir_doc_info_dir_inputs}
## It would be much simpler if info/dir was only created in the
## installation location by the install-info rule, but we also
## need one in the source directory for people running uninstalled.
## FIXME it would be faster to use the install-info program if we have it,
## but then we would need to depend on info-real, which would
## slow down parallelization.
${srcdir}/info/dir: ${info_dir_deps}
$(AM_V_at)${MKDIR_P} ${srcdir}/info
$(AM_V_GEN)(cd ${srcdir}/doc && \
AWK='${AWK}' ../build-aux/make-info-dir ${info_dir_inputs} \
) >$@.tmp && mv $@.tmp $@
INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
install-lispintro-dvi install-misc-dvi
INSTALL_HTML = install-emacs-html install-lispref-html \
install-lispintro-html install-misc-html
INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
install-lispintro-pdf install-misc-pdf
INSTALL_PS = install-emacs-ps install-lispref-ps \
install-lispintro-ps install-misc-ps
INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
## Install non .info forms of the documentation.
## TODO add etc/refcards.
$(INSTALL_DOC):
$(MAKE) -C doc/$(subst -, install-,$(subst install-,,$@))
.PHONY: $(INSTALL_DOC) install-doc
.PHONY: install-dvi install-html install-pdf install-ps
install-doc: $(INSTALL_DOC)
install-dvi: $(INSTALL_DVI)
install-html: $(INSTALL_HTML)
install-pdf: $(INSTALL_PDF)
install-ps: $(INSTALL_PS)
UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
uninstall-lispintro-dvi uninstall-misc-dvi
UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
uninstall-lispintro-html uninstall-misc-html
UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
uninstall-lispintro-pdf uninstall-misc-pdf
UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
uninstall-lispintro-ps uninstall-misc-ps
UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
$(UNINSTALL_DOC):
$(MAKE) -C doc/$(subst -, uninstall-,$(subst uninstall-,,$@))
.PHONY: $(UNINSTALL_DOC) uninstall-doc
.PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
uninstall-doc: $(UNINSTALL_DOC)
uninstall-dvi: $(UNINSTALL_DVI)
uninstall-html: $(UNINSTALL_HTML)
uninstall-pdf: $(UNINSTALL_PDF)
uninstall-ps: $(UNINSTALL_PS)
# Note that man/Makefile knows how to put the info files in $(srcdir),
# so we can do ok running make in the build dir.
# This used to have a clause that exited with an error if MAKEINFO = no.
# But it is inappropriate to do so without checking if makeinfo is
# actually needed - it is not if the info files are up-to-date. (Bug#3982)
# Only the doc/*/Makefiles can decide that, so we let those rules run
# and give a standard error if makeinfo is needed but missing.
# While it would be nice to give a more detailed error message, that
# would require changing every rule in doc/ that builds an info file,
# and it's not worth it. This case is only relevant if you download a
# release, then change the .texi files.
info:
ifneq ($(HAVE_MAKEINFO),no)
$(MAKE) info-real info-dir
endif
## build-aux/make-info-dir expects only certain dircategories.
check-info: info
cd info ; \
bad= ; \
for file in *; do \
test -f "$${file}" || continue ; \
case $${file} in \
*-[0-9]*|COPYING|dir) continue ;; \
esac ; \
cat=`sed -n 's/^INFO-DIR-SECTION //p' $${file}`; \
case $${cat} in \
"Texinfo documentation system" | "Emacs"| "Emacs lisp" | \
"Emacs editing modes" | "Emacs network features" | \
"Emacs misc features" | "Emacs lisp libraries" ) : ;; \
*) bad="$${bad} $${file}" ;; \
esac; \
done ; \
if test -n "$${bad}"; then \
echo "Unexpected dircategory in: $${bad}" ; \
exit 1 ; \
fi ; \
echo "info files are OK"
#### Bootstrapping.
### This first cleans the lisp subdirectory, removing all compiled
### Lisp files. Then re-run make to build all the files anew.
.PHONY: bootstrap
# Bootstrapping does the following:
# * Remove files to start from a bootstrap-clean slate.
# * Run autogen.sh.
# * Rebuild Makefile, to update the build procedure itself.
# * Do the actual build.
bootstrap: bootstrap-clean
cd $(srcdir) && ./autogen.sh autoconf
$(MAKE) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) all
.PHONY: ChangeLog change-history change-history-commit change-history-nocommit
.PHONY: preferred-branch-is-current unchanged-history-files
CHANGELOG = ChangeLog
emacslog = build-aux/gitlog-to-emacslog
# The ChangeLog history files are called ChangeLog.1, ChangeLog.2, ...,
# ChangeLog.$(CHANGELOG_HISTORY_INDEX_MAX). $(CHANGELOG_N) stands for
# the newest (highest-numbered) ChangeLog history file.
CHANGELOG_HISTORY_INDEX_MAX = 3
CHANGELOG_N = ChangeLog.$(CHANGELOG_HISTORY_INDEX_MAX)
# Convert git commit log to ChangeLog file. make-dist uses this.
# I guess this is PHONY so it always updates?
ChangeLog:
$(AM_V_GEN)cd $(srcdir) && \
./$(emacslog) -o $(CHANGELOG) -n $(CHANGELOG_HISTORY_INDEX_MAX)
# Check that we are in a good state for changing history.
PREFERRED_BRANCH = emacs-26
preferred-branch-is-current:
git branch | grep -q '^\* $(PREFERRED_BRANCH)$$'
unchanged-history-files:
x=$$(git diff-files --name-only $(CHANGELOG_N) $(emacslog)) && \
test -z "$$x"
# Regular expression that matches the newest commit covered by a ChangeLog.
new_commit_regexp = ^commit [0123456789abcdef]* (inclusive)
# Copy newer commit messages to the start of the ChangeLog history file,
# and consider them to be older.
change-history-nocommit: preferred-branch-is-current unchanged-history-files
-rm -f ChangeLog.tmp
$(MAKE) ChangeLog CHANGELOG=ChangeLog.tmp
sed '/^This file records repository revisions/,$$d' \
ChangeLog.tmp >$(CHANGELOG_N).tmp
new_commit_line=`grep '$(new_commit_regexp)' ChangeLog.tmp` && \
sed 's/$(new_commit_regexp).*/'"$$new_commit_line/" \
$(CHANGELOG_N) >>$(CHANGELOG_N).tmp
rm ChangeLog.tmp
mv $(CHANGELOG_N).tmp $(CHANGELOG_N)
change-history: change-history-nocommit
$(MAKE) $@-commit
# If 'make change-history' fails because the newest ChangeLog history
# file contains invalid text, fix the file by hand and then run
# 'make change-history-commit'.
change-history-commit:
git commit -m'; make $@' $(CHANGELOG_N) $(emacslog)
.PHONY: check-declare
check-declare:
@if [ ! -f $(srcdir)/src/emacs ]; then \
echo "You must build Emacs to use this command"; \
exit 1; \
fi
$(MAKE) -C lisp $@
$(MAKE) -C test $@
.PHONY: gitmerge
GITMERGE_EMACS = ./src/emacs${EXEEXT}
GITMERGE_NMIN = 10
gitmerge:
${GITMERGE_EMACS} -batch --no-site-file --no-site-lisp \
-l ${srcdir}/admin/gitmerge.el \
--eval '(setq gitmerge-minimum-missing ${GITMERGE_NMIN})' -f gitmerge