mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-19 03:52:17 +00:00
Code Issues Releases Activity
00310c02d7
freebsd-ports/lang/perl5/Makefile

144 lines
3.8 KiB
Makefile
Raw Normal View History

Perl5 port by Mark Murray. People, beat this! Submitted by: Mark Murray <markm@freebsd.org>
1995-04-17 06:02:34 +00:00
# New ports collection makefile for: perl5
# Date created: 16 April 1995
# Whom: markm
#
Change Id->FreeBSD.
1999-08-25 06:35:40 +00:00
# $FreeBSD$
Perl5 port by Mark Murray. People, beat this! Submitted by: Mark Murray <markm@freebsd.org>
1995-04-17 06:02:34 +00:00
#
Convert to the PORTNAME - PORTVERSION syntax.
2000-04-12 06:21:15 +00:00
PORTNAME= perl
Upgrade this to perl5.6.0 for _knowledgeable_ folks in STABLE who really want it. This is still marked FORBIDDEN as there may be all sorts of horrible incompatabilities with the perl5 in "base", but folks who are willing to override this and experiment are welcome. Consider this to be only partially supported. I'll happily commit patches and fixes, but I don't want to answer too many questions. Sorry!
2001-03-22 15:17:46 +00:00
PORTVERSION= ${PERL_VER}
Update bsd.port.mk's notion of the perl version (to 5.8.6) [1]. Use more correct OSVERSION threshold to distinguish between base system perl and perl from ports - the right value is 500036 [1]. Also, simplify OSVERSION-related logic in lang/perl5 and lang/perl5.8. Now it goes as follows: - for lang/perl5.8, if there is perl in the base system, install use.perl script, use a helpful pkg-message, and do not automatically update symlinks; - for lang/perl5.8, if there is no perl in the base system, do not install use.perl script, and update symlinks automatically; - for lang/perl5, always install use.perl; - for lang/perl5, never update symlinks automatically; - for lang/perl5, vary produced pkg-message depending on the presence of the base system perl. Bump PORTREVISION for both lang/perl5 and lang/perl5.8. [1] Approved by: portmgr
2005-02-02 09:34:05 +00:00
PORTREVISION= 2
Add virtual category 'perl5'.
1997-04-20 13:53:29 +00:00
CATEGORIES= lang devel perl5
1. Speed up the fetch stage by using groups of MASTER_SITES. 2. Remove the dependency on perl (rather important for this port). 3. Make the script this port installs use the version of perl from ports. Reported-by: (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer <xaa@timewasters.nl>
2002-05-20 00:03:07 +00:00
MASTER_SITES= ${MASTER_SITE_PERL_CPAN} \
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
${MASTER_SITE_LOCAL:S/$/:local/} \
http://www.tobez.org/download/port-mirrors/lang/perl56/:local
1. Speed up the fetch stage by using groups of MASTER_SITES. 2. Remove the dependency on perl (rather important for this port). 3. Make the script this port installs use the version of perl from ports. Reported-by: (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer <xaa@timewasters.nl>
2002-05-20 00:03:07 +00:00
MASTER_SITE_SUBDIR= ../../src \
Don't use "." in MASTER_SITE_SUBDIR; it only applies to URLs with %SUBDIR% in them, and the site that needed the "." doesn't. Approved by: Anton Berezin <tobez@tobez.org> (MAINTAINER)
2005-10-10 15:38:16 +00:00
tobez/:local
1. Speed up the fetch stage by using groups of MASTER_SITES. 2. Remove the dependency on perl (rather important for this port). 3. Make the script this port installs use the version of perl from ports. Reported-by: (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer <xaa@timewasters.nl>
2002-05-20 00:03:07 +00:00
DISTFILES= ${DISTNAME}${EXTRACT_SUFX} \
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
BSDPAN-${PERL_VER}${EXTRACT_SUFX}:local
Perl5 port by Mark Murray. People, beat this! Submitted by: Mark Murray <markm@freebsd.org>
1995-04-17 06:02:34 +00:00
Take over maintainership. OK'ed by: markm
2001-06-12 19:36:32 +00:00
MAINTAINER= tobez@FreeBSD.org
Clear moonlight beckons. Requiem mors pacem pkg-comment, And be calm ports tree. E Nomini Patri, E Fili, E Spiritu Sancti.
2003-03-07 06:14:21 +00:00
COMMENT= Practical Extraction and Report Language
Perl5 port by Mark Murray. People, beat this! Submitted by: Mark Murray <markm@freebsd.org>
1995-04-17 06:02:34 +00:00
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
PERL_VER= 5.6.2
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
PERL_ARCH= mach
PERL_VERSION= ${PERL_VER}
Update for Perl 5.6.1. As before, this is a "guru only" port. If you know what you are doing, go ahead and use it. If not - HANDS OFF! Perl 5.6.1 will be committed to "base" FreeBSD in a week or 2.
2001-04-10 19:57:49 +00:00
Upgrade this to perl5.6.0 for _knowledgeable_ folks in STABLE who really want it. This is still marked FORBIDDEN as there may be all sorts of horrible incompatabilities with the perl5 in "base", but folks who are willing to override this and experiment are welcome. Consider this to be only partially supported. I'll happily commit patches and fixes, but I don't want to answer too many questions. Sorry!
2001-03-22 15:17:46 +00:00
HAS_CONFIGURE= yes
CONFIGURE_SCRIPT=Configure
CONFIGURE_ARGS= -sde -Dprefix=${PREFIX} \
-Darchlib=${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} \
-Dprivlib=${PREFIX}/lib/perl5/${PERL_VER} \
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
-Dman3dir=${PREFIX}/lib/perl5/${PERL_VER}/perl/man/man3 \
-Dman1dir=${PREFIX}/man/man1 \
-Dsitearch=${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH} \
-Dsitelib=${PREFIX}/${SITE_PERL_REL} -Dscriptdir=${PREFIX}/bin \
-Dsiteman3dir=${PREFIX}/lib/perl5/${PERL_VER}/man/man3 \
-Dsiteman1dir=${PREFIX}/man/man1 \
-Ui_malloc -Ui_iconv -Uinstallusrbinperl \
-Dcc="${CC}" -Doptimize="${CFLAGS}" -Duseshrplib \
-Dccflags=-DAPPLLIB_EXP=\"${BSDPAN_DEST}\"
If one of locale-related variables set to a bad value in the user's environment (like da_DK.ISO_8859-15 as opposed to da_DK.ISO8859-15 on -CURRENT), perl ports cannot be built. While this condition clearly is an operator error, it is still no excuse for the build failure. Fix that by cleaning locale-related variables for configure and build steps. No plist changes, no portrevision bump. Reported by: Flemming Jacobsen <fj quite-at batmule maybe-dot dk>
2005-02-14 10:17:07 +00:00
LOCALE_CLEANUP= LANG="" LC_ALL="" LC_COLLATE="" LC_CTYPE="" \
LC_MESSAGES="" LC_MONETARY="" LC_NUMERIC="" \
LC_TIME=""
CONFIGURE_ENV+= ${LOCALE_CLEANUP}
MAKE_ENV+= ${LOCALE_CLEANUP}
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
.include "Makefile.man"
.include <bsd.port.pre.mk>
.if defined(ENABLE_SUIDPERL)
CONFIGURE_ARGS+= -Dd_dosuid=define
PLIST_SUB+= ENABLE_SUIDPERL=""
.else
CONFIGURE_ARGS+= -Ud_dosuid
PLIST_SUB+= ENABLE_SUIDPERL="@comment "
.endif
Perl5 port by Mark Murray. People, beat this! Submitted by: Mark Murray <markm@freebsd.org>
1995-04-17 06:02:34 +00:00
Add two knobs: WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to the freebsd system malloc. Some might find this useful, since perl's malloc is marginally faster in typical cases, and orders of magnitude faster in degenerate cases. Use with care. WITH_GDBM - to compile with gdbm support. Requested by: netchild (WITH_PERL_MALLOC), Joachim Leidinger <jojo@blackpoint.de> (WITH_GDBM)
2002-07-28 08:25:07 +00:00
.if defined(WITH_GDBM)
CONFIGURE_ARGS+= -Di_gdbm
chase gdbm lib version
2003-01-03 08:26:35 +00:00
LIB_DEPENDS+= gdbm.3:${PORTSDIR}/databases/gdbm
Add two knobs: WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to the freebsd system malloc. Some might find this useful, since perl's malloc is marginally faster in typical cases, and orders of magnitude faster in degenerate cases. Use with care. WITH_GDBM - to compile with gdbm support. Requested by: netchild (WITH_PERL_MALLOC), Joachim Leidinger <jojo@blackpoint.de> (WITH_GDBM)
2002-07-28 08:25:07 +00:00
PLIST_SUB+= GDBM=""
.else
CONFIGURE_ARGS+= -Ui_gdbm
PLIST_SUB+= GDBM="@comment "
.endif
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
.if defined(WITHOUT_PERL_MALLOC)
.undef WITH_PERL_MALLOC
.else
WITH_PERL_MALLOC= yes
.endif
.if defined(WITH_THREADS)
IGNORE= Threads are not very useful in perl ${PERL_VERSION}, please use lang/perl5.8
.endif
Add two knobs: WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to the freebsd system malloc. Some might find this useful, since perl's malloc is marginally faster in typical cases, and orders of magnitude faster in degenerate cases. Use with care. WITH_GDBM - to compile with gdbm support. Requested by: netchild (WITH_PERL_MALLOC), Joachim Leidinger <jojo@blackpoint.de> (WITH_GDBM)
2002-07-28 08:25:07 +00:00
.if defined(WITH_PERL_MALLOC)
CONFIGURE_ARGS+= -Dusemymalloc=y
.else
CONFIGURE_ARGS+= -Dusemymalloc=n
.endif
Due to popular demant into each port which might be inserted into dependency list by bsd.port.mk insert anti foot-shooting device, which prevents infinite fork loop when the user defines corresponding USE_XXX in global make.conf, command line or environment. Similar devices should probably be inserted into ports that might be inserted into dependency list by others bsd.foo.mk files (bsd.ruby.mk, bsd.python.mk and so on.)
2002-09-14 13:32:06 +00:00
.ifdef USE_PERL5
.error You have `USE_PERL5' variable defined either in environment or in make(1) arguments. Please undefine and try again.
.endif
Fix LATEST_LINK issues. Nudged by: krion
2005-05-03 10:45:08 +00:00
NO_LATEST_LINK= yes
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
.if ${OSVERSION} < 500036
PKGMESSAGE= ${PKGDIR}/pkg-message-sysperl
.else
PKGMESSAGE= ${PKGDIR}/pkg-message-prefer58
.endif
PLIST_SUB+= NEED_USE_PERL=""
On recent 5-CURRENT, there is no Perl wrapper. It is therefore possible that /usr/bin/perl5 doesn't exist, which violates some of use.perl's assumptions. Take care of this case. [1] Also in the case of a recent 5-CURRENT, automatically perform "use.perl port" during package/port installation. This helps the installation of sysinstall's new "Perl distribution", in that sysinstall doesn't need to do this explicitly as Yet Another Special Case. [2] PORTREVISION bump after all this good stuff. Requested by: bmah [1], jhb [2] Submitted by: tobez (port MAINTAINER) Approved by: portmgr (kris)
2002-12-04 16:50:04 +00:00
Add two knobs: WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to the freebsd system malloc. Some might find this useful, since perl's malloc is marginally faster in typical cases, and orders of magnitude faster in degenerate cases. Use with care. WITH_GDBM - to compile with gdbm support. Requested by: netchild (WITH_PERL_MALLOC), Joachim Leidinger <jojo@blackpoint.de> (WITH_GDBM)
2002-07-28 08:25:07 +00:00
.if defined(WITH_GDBM)
MAN3+= GDBM_File.3
.endif
Add support for DESTDIR part I. This commit should largele be a NOOP as it only adds support for DESTDIR undefined. This does allow us to start testing ports with DESTDIR set, but this is as of yet not supported. Although this has been extensively tested on pointyhat, this is a very intrusive change and some cases may have been overlooked. Please contact Gabor and me if you find any. PR: 100555 Submitted by: gabor Sponsored by: Google Summer of Code 2006
2006-08-04 12:34:50 +00:00
MAN3PREFIX= ${TARGETDIR}/lib/perl5/${PERL_VER}/perl
Compress manpages in lib/perl5/man/man3 too. Add missing GDBM_File.3.
1996-12-07 14:23:29 +00:00
Perl5 port by Mark Murray. People, beat this! Submitted by: Mark Murray <markm@freebsd.org>
1995-04-17 06:02:34 +00:00
test:
@(cd ${WRKSRC}; make test)
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
BSDPAN_DEST= ${PREFIX}/lib/perl5/${PERL_VER}/BSDPAN
BSDPAN_FILES= BSDPAN.pm BSDPAN/Override.pm Config.pm \
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
ExtUtils/MM_Unix.pm \
ExtUtils/MakeMaker.pm \
ExtUtils/Packlist.pm
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
BSDPAN_WRKSRC= ${WRKDIR}/BSDPAN-${PORTVERSION}
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
PKGINSTALL= ${WRKDIR}/pkg-install
PKGDEINSTALL= ${WRKDIR}/pkg-deinstall
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
post-patch:
1. Speed up the fetch stage by using groups of MASTER_SITES. 2. Remove the dependency on perl (rather important for this port). 3. Make the script this port installs use the version of perl from ports. Reported-by: (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer <xaa@timewasters.nl>
2002-05-20 00:03:07 +00:00
${SED} -e 's|%%PREFIX%%|${PREFIX}|g;' \
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
-e 's|%%PERL_VER%%|${PERL_VER}|g;' \
-e 's|%%PERL_VERSION%%|${PERL_VERSION}|g;' \
-e 's|%%PERL_ARCH%%|${PERL_ARCH}|g;' \
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
-e 's|%%MAKE_CONF%%|${__MAKE_CONF}|g;' \
1. Speed up the fetch stage by using groups of MASTER_SITES. 2. Remove the dependency on perl (rather important for this port). 3. Make the script this port installs use the version of perl from ports. Reported-by: (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer <xaa@timewasters.nl>
2002-05-20 00:03:07 +00:00
${FILESDIR}/use.perl \
> ${WRKDIR}/use.perl
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
${CP} ${WRKDIR}/use.perl ${PKGINSTALL}
${CP} ${WRKDIR}/use.perl ${PKGDEINSTALL}
pre-install:
@${RM} -f ${PREFIX}/bin/perl${PERL_VER}
@${RM} -f ${PREFIX}/bin/perl
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
gzip man pages, strip binaries
1995-04-23 17:21:34 +00:00
post-install:
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
@${STRIP_CMD} ${PREFIX}/bin/perl${PERL_VER}
@${STRIP_CMD} ${PREFIX}/bin/perl
@${LN} -sf ${PREFIX}/bin/perl${PERL_VER} ${PREFIX}/bin/perl5
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
.for file in ${BSDPAN_FILES}
${MKDIR} ${BSDPAN_DEST}/${file:H}
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${NOBINMODE} \
${BSDPAN_WRKSRC}/${file} ${BSDPAN_DEST}/${file}
.endfor
Update to 5.6.2. Also: - redirect output from h2ph to /dev/null [1]; - fix File::Path insecure file/directory permissions [2]; this resolves CAN-2004-0452 (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html); - for OSVERSION < 500036, create symlinks in /usr/bin not only for perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs, perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man, pod2text, s2p, and splain; perl and suidperl are still enough for more recent FreeBSD versions [3]; - clean up created symlinks upon deinstallation [4]; - try to cleanup symlinks created by older versions of lang/perl5 and lang/perl5.8, during both installation and deinstallation [5]; - added support for DISABLE_BSDPAN environment variable [6]; - be explicit about use.perl usage after installation of 4.X systems, and on systems where lang/perl5.8 is prefered to lang/perl5; the exact range is OSVERSION < 500036 || OSVERSION >= 502100 [7]; - respect __MAKE_CONF partially (the build-time value is used) [8]; - use.perl is now the same as pkg-install is now the same as pkg-deinstall; apart from the changes already mentioned above, this is a shell script now; - use.perl's logic is also simplified in several ways [9]; - fix a BSDPAN bug [10]; - create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just like lang/perl5.8 does, to silent pointyhat [11]; - apply a patch to handle daylight saving time correctly in POSIX::strftime [12]; - the port now creates and uses shared libperl.so, as lang/perl5.8 port does; - move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as to avoid conflict with some of the p5 ports; - do not build suidperl by default any longer; one should use ENABLE_SUIDPERL to do that; - move out manpage list to a separate Makefile.man; - in general, the port layout is made much more similar to lang/perl5.8, including. Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR 70831), PR 64963 (partially), and anything else that I forgot. [1] Nudged by: krion [2] Reported by: nectar Patch from: Chris Turner @ RedHat [3] PR: 55760, 57151, 58406 [4] Requested by: kris PR: 54262 [5] PR: 51281, 51539 [6] PR: 57134 [7] PR: 60736 [8] PR: 74431 [9] Perl version submitted by des, implemented in sh [10] Reported by: Alexander Nagilum <freebsd %at% nagilum de> [11] PR: 71390 [12] PR: 74042, perl bug 18238
2005-02-01 13:36:41 +00:00
PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
${INSTALL_SCRIPT} ${WRKDIR}/use.perl ${PREFIX}/bin/use.perl
Unforbid the port for the use of general FreeBSD public. Compile perl with BSDPAN support, both -current and -stable. The version of BSDPAN used here coincides accidentally with the one present in the -current system perl, but is installed in a different place. Provide a script, use.perl, to facilitate switching of the perl used by default between the system perl and this port. Also print a message describing the usage of use.perl (this works for the port and for the package built from it). The switching to the port version is done by removing /usr/bin/perl and /usr/bin/suidperl (they both have link count >1, so this is reversible), and making them to be symlinks to the corresponding binaries in $PREFIX/bin. Also, assignments of the correct values of PERL_VER, PERL_VERSION, and PERL_ARCH are appended to /etc/make.conf. Last, NOPERL=yes is appended to /etc/make.conf, so that the changes made will survive system upgrades from source. The switching to the system version is more or less a reverse of the process described above. Set and use PERL_ARCH which is independed from the one used by the system perl. Fix the port for post-malloc.h -current. Fix a small bogon when PREFIX was used in pkg-install (PKG_PREFIX should have been used instead). Reviewed by: markm, joe
2001-12-19 17:05:05 +00:00
@fmt ${PKGMESSAGE}
gzip man pages, strip binaries
1995-04-23 17:21:34 +00:00
Use bsd.port.{pre,post}.mk. Either use them to avoid having to define something already there (PORTOBJFORMAT, OSVERSION) or move stuff from after .include <bsd.port.mk> to before. (This is not by any means the complete list but just the ones I've noticed recently.)
1998-11-11 05:37:39 +00:00
.include <bsd.port.post.mk>
Reference in New Issue Copy Permalink