freebsd-ports/audio/mpg123/Makefile

# New ports collection makefile for:	mpg123
# Version required:		0.59r
# Date created:			25 June 1997
# Whom:				Carey Jones <mcj@acquiesce.org>
#
# $FreeBSD$
#

DISTNAME=	mpg123-0.59r
CATEGORIES=	audio
MASTER_SITES=	http://www.mpg123.de/mpg123/ \
		http://www-ti.informatik.uni-tuebingen.de/~hippm/mpg123/ \
		ftp://ftp.tu-clausthal.de/pub/unix/audio/mpg123/ \
		http://ftp.tu-clausthal.de/pub/unix/audio/mpg123/

MAINTAINER=	jkoshy@freebsd.org

.if defined(OPT_ESOUND)
LIB_DEPENDS=	esd.2:${PORTSDIR}/audio/esound
.endif

ONLY_FOR_ARCHS=	i386

MAN1=		mpg123.1

.include <bsd.port.pre.mk>

.if defined(OPT_ESOUND)
ALL_TARGET=	freebsd-esd
.else
ALL_TARGET=	freebsd
.endif

pre-configure:
.if !defined(OPT_ESOUND) && exists(${PREFIX}/lib/libesd.a)
	@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"
	@${ECHO_MSG} "Note: you can set OPT_ESOUND to \"yes\" to compile mpg123 with esd support."
	@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"
.endif
.if $(MACHINE_ARCH) == "i386"
.if !defined(OPT_ARCH) || (($(OPT_ARCH) != "i486") && ($(OPT_ARCH) != "i586"))
	@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"
	@${ECHO_MSG} "Note: you can set OPT_ARCH to optimize for your hardware. (Eg:- make OPT_ARCH=i486)"
.if $(PORTOBJFORMAT) == "elf"
	@${ECHO_MSG} "Valid values are: i486, i586"
.else
	@${ECHO_MSG} "Valid values are: i486"
.endif
	@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"
.endif
.endif

.if $(PORTOBJFORMAT) == "elf"
OPT_ARCH?=	i586
.else
OPT_ARCH?=	i486
.endif

# Uncomment this line below to optimise for i486 family CPUs on ELF boxes
# OPT_ARCH=	i486

.if defined(OPT_ARCH)
MAKE_ARGS+=	OPT_ARCH=$(OPT_ARCH)
.endif

.if defined(OPT_ESOUND)
MAKE_ARGS+=	OPT_ESOUND=$(OPT_ESOUND)
.endif

.include <bsd.port.post.mk>
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00			`# New ports collection makefile for: mpg123`
Update Version required: to match reality 1999-08-12 03:47:45 +00:00			`# Version required: 0.59r`
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00			`# Date created: 25 June 1997`
			`# Whom: Carey Jones <mcj@acquiesce.org>`
			`#`
Change Id->FreeBSD. 1999-08-25 04:36:31 +00:00			`# $FreeBSD$`
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00			`#`

Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`DISTNAME= mpg123-0.59r`
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00			`CATEGORIES= audio`
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`MASTER_SITES= http://www.mpg123.de/mpg123/ \`
			`http://www-ti.informatik.uni-tuebingen.de/~hippm/mpg123/ \`
Update to v0.59q. Requested by: Vanilla GTK+ Shu <vanilla@ns.oneway.net> (and others) 1999-02-01 09:01:09 +00:00			`ftp://ftp.tu-clausthal.de/pub/unix/audio/mpg123/ \`
			`http://ftp.tu-clausthal.de/pub/unix/audio/mpg123/`
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00
Unbreak for ELF builds, take over as maintainer. 1998-10-03 12:09:54 +00:00			`MAINTAINER= jkoshy@freebsd.org`
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00
Add ESound support to the mpg123 port. Requested by: "Daniel O'Connor" <doconnor@gsoft.com.au> and Oh Junseon <hollywar@holywar.net> 1999-11-11 05:41:25 +00:00			`.if defined(OPT_ESOUND)`
			`LIB_DEPENDS= esd.2:${PORTSDIR}/audio/esound`
			`.endif`

Correct typo 'i836' -> 'i386'. 1999-09-20 04:55:24 +00:00			`ONLY_FOR_ARCHS= i386`
Mark this port as being only for i386. 1999-09-20 01:05:45 +00:00
New port, mpg123: Command-line player for mpeg layer 1, 2 and 3 audio PR: 3952 Submitted by: Carey Jones <mcj@acquiesce.org> 1997-07-10 09:41:25 +00:00			`MAN1= mpg123.1`

Use bsd.port.{pre,post}.mk to move PORTOBJFORMAT to front, or change shell loops to make loops. Use EXTRA_PKG_FLAGS to add install scripts instead of adding it to PKG_FLAGS after bsd.port.mk. 1998-11-14 09:43:39 +00:00			`.include <bsd.port.pre.mk>`
Unbreak for ELF builds, take over as maintainer. 1998-10-03 12:09:54 +00:00
Add ESound support to the mpg123 port. Requested by: "Daniel O'Connor" <doconnor@gsoft.com.au> and Oh Junseon <hollywar@holywar.net> 1999-11-11 05:41:25 +00:00			`.if defined(OPT_ESOUND)`
			`ALL_TARGET= freebsd-esd`
			`.else`
Unbreak for ELF builds, take over as maintainer. 1998-10-03 12:09:54 +00:00			`ALL_TARGET= freebsd`
Add ESound support to the mpg123 port. Requested by: "Daniel O'Connor" <doconnor@gsoft.com.au> and Oh Junseon <hollywar@holywar.net> 1999-11-11 05:41:25 +00:00			`.endif`
Use bsd.port.{pre,post}.mk to move PORTOBJFORMAT to front, or change shell loops to make loops. Use EXTRA_PKG_FLAGS to add install scripts instead of adding it to PKG_FLAGS after bsd.port.mk. 1998-11-14 09:43:39 +00:00
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`pre-configure:`
Add ESound support to the mpg123 port. Requested by: "Daniel O'Connor" <doconnor@gsoft.com.au> and Oh Junseon <hollywar@holywar.net> 1999-11-11 05:41:25 +00:00			`.if !defined(OPT_ESOUND) && exists(${PREFIX}/lib/libesd.a)`
			`@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"`
			`@${ECHO_MSG} "Note: you can set OPT_ESOUND to \"yes\" to compile mpg123 with esd support."`
			`@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"`
			`.endif`
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`.if $(MACHINE_ARCH) == "i386"`
			`.if !defined(OPT_ARCH) \|\| (($(OPT_ARCH) != "i486") && ($(OPT_ARCH) != "i586"))`
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE} 1999-08-27 21:14:04 +00:00			`@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"`
			`@${ECHO_MSG} "Note: you can set OPT_ARCH to optimize for your hardware. (Eg:- make OPT_ARCH=i486)"`
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`.if $(PORTOBJFORMAT) == "elf"`
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE} 1999-08-27 21:14:04 +00:00			`@${ECHO_MSG} "Valid values are: i486, i586"`
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`.else`
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE} 1999-08-27 21:14:04 +00:00			`@${ECHO_MSG} "Valid values are: i486"`
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`.endif`
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE} 1999-08-27 21:14:04 +00:00			`@${ECHO_MSG} "+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++"`
Upgrade to v0.59r. mpg123 can now be built tuned for your specific x86 architecture at port build time. PR: ports/12814 Submitted by: Maxim Sobolev <sobomax@altavista.net> 1999-08-05 05:53:54 +00:00			`.endif`
			`.endif`

Set a default optimization level for the lazy and hopeless :). Requested by: Nick Hibma <nick.hibma@jrc.it> 1999-08-25 11:25:01 +00:00			`.if $(PORTOBJFORMAT) == "elf"`
			`OPT_ARCH?= i586`
			`.else`
			`OPT_ARCH?= i486`
			`.endif`

			`# Uncomment this line below to optimise for i486 family CPUs on ELF boxes`
			`# OPT_ARCH= i486`

			`.if defined(OPT_ARCH)`
			`MAKE_ARGS+= OPT_ARCH=$(OPT_ARCH)`
			`.endif`

Add ESound support to the mpg123 port. Requested by: "Daniel O'Connor" <doconnor@gsoft.com.au> and Oh Junseon <hollywar@holywar.net> 1999-11-11 05:41:25 +00:00			`.if defined(OPT_ESOUND)`
			`MAKE_ARGS+= OPT_ESOUND=$(OPT_ESOUND)`
			`.endif`

Use bsd.port.{pre,post}.mk to move PORTOBJFORMAT to front, or change shell loops to make loops. Use EXTRA_PKG_FLAGS to add install scripts instead of adding it to PKG_FLAGS after bsd.port.mk. 1998-11-14 09:43:39 +00:00			`.include <bsd.port.post.mk>`