mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-02 01:20:54 +00:00
Code Issues Releases Activity
be214df06e
freebsd-ports/editors/vile/Makefile

108 lines
2.8 KiB
Makefile
Raw Normal View History

Bring in vile port (from the author, Paul Fox, and FreeBSD member Gary Jennejohn). Submitted by: gj
1995-02-27 23:00:37 +00:00
# New ports collection makefile for: vile
Updated to version 6.3 Closes PR: ports/2109 Submitted by: Paul Fox <pgf@american.com>
1996-12-03 12:53:39 +00:00
# Date created: Wed Nov 26, 1996
Bring in vile port (from the author, Paul Fox, and FreeBSD member Gary Jennejohn). Submitted by: gj
1995-02-27 23:00:37 +00:00
# Whom: pgf
#
Change Id->FreeBSD.
1999-08-25 05:57:29 +00:00
# $FreeBSD$
Bring in vile port (from the author, Paul Fox, and FreeBSD member Gary Jennejohn). Submitted by: gj
1995-02-27 23:00:37 +00:00
#
portname/portversion update
2000-04-14 00:25:54 +00:00
PORTNAME= vile
Update to 9.7za.
2010-02-01 11:23:55 +00:00
PORTVERSION= 9.7za
CATEGORIES+= --> CATEGORIES= Minor variable reordering where needed.
1996-11-11 05:07:53 +00:00
CATEGORIES= editors
Update to version 9.5. Do some cleanup to make portlint happy. In the WITH_FILTERS case use dynamically loadable filters rather than filters which are statically compiled in. This makes the executables about 200kB to 400kB smaller and does not semm to make startup any slower. Partly based on PR: ports/84122
2005-07-31 11:08:06 +00:00
MASTER_SITES= ftp://dickey.his.com/vile/ \
ftp://invisible-island.net/vile/ \
Update to 9.4o.
2005-02-01 15:13:09 +00:00
ftp://ftp.phred.org/pub/vile/
Update to version 9.7. While I'm here, fix handling of the NOPORTSDOCS case.
2008-06-17 11:50:58 +00:00
DISTNAME= vile-9.7
Update to patch level u and bump PORTVERSION. Fix Makefile so that portlint doesn't complain. Add a WITH_ALL variable to make it easier to install the port with all options set.
2002-01-13 19:09:49 +00:00
EXTRACT_SUFX= .tgz
Update to 9.5a. PR: ports/86232 (vile only)
2005-10-01 19:08:34 +00:00
PATCH_SITES= ${MASTER_SITES:S,vile/,vile/patches/,g}
Update to 9.7j.
2009-01-05 13:00:19 +00:00
PATCHFILES= vile-9.7a.patch.gz \
vile-9.7b.patch.gz \
vile-9.7c.patch.gz \
vile-9.7d.patch.gz \
vile-9.7e.patch.gz \
vile-9.7f.patch.gz \
vile-9.7g.patch.gz \
vile-9.7h.patch.gz \
vile-9.7i.patch.gz \
Update to 9.7m.
2009-03-25 09:49:10 +00:00
vile-9.7j.patch.gz \
vile-9.7k.patch.gz \
vile-9.7l.patch.gz \
Update to version 9.7t.
2009-08-13 10:35:03 +00:00
vile-9.7m.patch.gz \
vile-9.7n.patch.gz \
vile-9.7o.patch.gz \
vile-9.7p.patch.gz \
vile-9.7q.patch.gz \
vile-9.7r.patch.gz \
vile-9.7s.patch.gz \
Update to version 9.7y.
2009-12-29 11:41:53 +00:00
vile-9.7t.patch.gz \
vile-9.7u.patch.gz \
vile-9.7v.patch.gz \
vile-9.7w.patch.gz \
vile-9.7x.patch.gz \
Update to 9.7za.
2010-02-01 11:23:55 +00:00
vile-9.7y.patch.gz \
vile-9.7z.patch.gz \
vile-9.7za.patch.gz
Update to version 9.4a.
2003-10-09 09:54:54 +00:00
Change freeBSD to FreeBSD in my email address for correctness.
2002-08-16 07:17:55 +00:00
MAINTAINER= gj@FreeBSD.org
Remove pkg-comment and add COMMENT to the Makefile.
2003-03-06 11:02:59 +00:00
COMMENT= VI Like Emacs. a vi "workalike", with many additional features
CATEGORIES+= --> CATEGORIES= Minor variable reordering where needed.
1996-11-11 05:07:53 +00:00
Another round of Makefile updates, editors version.
1995-04-09 06:11:17 +00:00
MAKEFILE= makefile
GNU_CONFIGURE= yes
Converted to MAN[1-9NL]
1996-11-17 07:01:32 +00:00
MAN1= vile.1
Compress manpages.
1995-04-24 03:38:32 +00:00
Update to version 9.5q. Use OPTIONS.
2007-05-29 16:55:40 +00:00
OPTIONS= FILTERS "Add support for loadable filters" OFF
It seems that vile now automatically turns on ICONV unless otherwise specified in CONFIGURE_ARGS. Add a config option to control this - default is OFF.
2008-02-17 11:49:05 +00:00
OPTIONS+= ICONV "Add support for ICONV" OFF
Update to version 9.5q. Use OPTIONS.
2007-05-29 16:55:40 +00:00
OPTIONS+= PERL "Add support for perl functions" OFF
.include <bsd.port.pre.mk>
Update to patch level u and bump PORTVERSION. Fix Makefile so that portlint doesn't complain. Add a WITH_ALL variable to make it easier to install the port with all options set.
2002-01-13 19:09:49 +00:00
It seems that vile now automatically turns on ICONV unless otherwise specified in CONFIGURE_ARGS. Add a config option to control this - default is OFF.
2008-02-17 11:49:05 +00:00
.if defined(WITH_ICONV)
CONFIGURE_ARGS+= --with-iconv
USE_ICONV= yes
.else
CONFIGURE_ARGS+= --without-iconv
Work around a problem which I noticed today while using vile. If ICONV support is turned off then i18n support (turned on by default) must also be disabled, otherwise vile ignores all keyboard input. Strangely, xvile does not exhibit this behavior.
2008-06-18 13:36:52 +00:00
CONFIGURE_ARGS+= --without-locale
It seems that vile now automatically turns on ICONV unless otherwise specified in CONFIGURE_ARGS. Add a config option to control this - default is OFF.
2008-02-17 11:49:05 +00:00
.endif
Standardize all user defined options to the booleans WITH_FOO and WITHOUT_FOO. Begin the process of reserving these prefixes for user defined options. No comment by: ports
2000-04-17 00:18:05 +00:00
.if defined(WITH_PERL)
Update to 9.5a. PR: ports/86232 (vile only)
2005-10-01 19:08:34 +00:00
CONFIGURE_ARGS+= --with-perl
Rename PLIST.perl to pkg-plist.perl.
2000-10-08 00:38:53 +00:00
PLIST= ${PKGDIR}/pkg-plist.perl
Update to version 9.5q. Use OPTIONS.
2007-05-29 16:55:40 +00:00
USE_PERL5= yes
Update vile to version 8. This adds support for PERL scripts but requires perl5. Install the documentation and macros in reasonable places. NOTE: If you are running -current then you may have to re-install perl5 to reflect the new /usr/lib/aout, otherwise the make of vile with the optional PERL support could fail. I was forced to do this in the course of testing.
1998-06-04 20:05:04 +00:00
.endif
Update this port to apply all the officially released patches (up to j, which is why PORTVERSION is now 9.2j). Add WITH_FILTERS so that the user can compile all the filters into the binary. For xvile, add WITH_XAW3D so that users with the Xaw3d library can use it instead of plain Xaw. Add 2 new PLISTs to reflect that most of the filters are not installed when WITH_FILTERS is used. Replace an obsolete ftp site with one which works.
2001-03-23 21:02:17 +00:00
.if defined(WITH_FILTERS)
Update to 9.5a. PR: ports/86232 (vile only)
2005-10-01 19:08:34 +00:00
CONFIGURE_ARGS+= --with-loadable-filters
Update this port to apply all the officially released patches (up to j, which is why PORTVERSION is now 9.2j). Add WITH_FILTERS so that the user can compile all the filters into the binary. For xvile, add WITH_XAW3D so that users with the Xaw3d library can use it instead of plain Xaw. Add 2 new PLISTs to reflect that most of the filters are not installed when WITH_FILTERS is used. Replace an obsolete ftp site with one which works.
2001-03-23 21:02:17 +00:00
PLIST= ${PKGDIR}/pkg-plist.filt
.endif
.if defined(WITH_PERL) && defined(WITH_FILTERS)
PLIST= ${PKGDIR}/pkg-plist.perl+filt
.endif
Update vile to version 8. This adds support for PERL scripts but requires perl5. Install the documentation and macros in reasonable places. NOTE: If you are running -current then you may have to re-install perl5 to reflect the new /usr/lib/aout, otherwise the make of vile with the optional PERL support could fail. I was forced to do this in the course of testing.
1998-06-04 20:05:04 +00:00
pre-configure:
Update to version 9.7. While I'm here, fix handling of the NOPORTSDOCS case.
2008-06-17 11:50:58 +00:00
.if !defined(WITH_ICONV)
It seems that vile now automatically turns on ICONV unless otherwise specified in CONFIGURE_ARGS. Add a config option to control this - default is OFF.
2008-02-17 11:49:05 +00:00
@${ECHO_MSG} "Choose the option ICONV if you want to make a vile which includes"
@${ECHO_MSG} "ICONV functionality"
.endif
Update to version 9.7. While I'm here, fix handling of the NOPORTSDOCS case.
2008-06-17 11:50:58 +00:00
.if !defined(WITH_PERL)
Update to version 9.5q. Use OPTIONS.
2007-05-29 16:55:40 +00:00
@${ECHO_MSG} "Choose the option PERL if you want to make a vile which includes"
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE}
1999-08-27 21:14:04 +00:00
@${ECHO_MSG} "PERL functionality"
Update vile to version 8. This adds support for PERL scripts but requires perl5. Install the documentation and macros in reasonable places. NOTE: If you are running -current then you may have to re-install perl5 to reflect the new /usr/lib/aout, otherwise the make of vile with the optional PERL support could fail. I was forced to do this in the course of testing.
1998-06-04 20:05:04 +00:00
.endif
Update to version 9.7. While I'm here, fix handling of the NOPORTSDOCS case.
2008-06-17 11:50:58 +00:00
.if !defined(WITH_FILTERS)
Update to version 9.5q. Use OPTIONS.
2007-05-29 16:55:40 +00:00
@${ECHO_MSG} "Choose the option FILTERS if you want to make a vile which will"
Update to version 9.5. Do some cleanup to make portlint happy. In the WITH_FILTERS case use dynamically loadable filters rather than filters which are statically compiled in. This makes the executables about 200kB to 400kB smaller and does not semm to make startup any slower. Partly based on PR: ports/84122
2005-07-31 11:08:06 +00:00
@${ECHO_MSG} "dynamically load filters as needed."
Update this port to apply all the officially released patches (up to j, which is why PORTVERSION is now 9.2j). Add WITH_FILTERS so that the user can compile all the filters into the binary. For xvile, add WITH_XAW3D so that users with the Xaw3d library can use it instead of plain Xaw. Add 2 new PLISTs to reflect that most of the filters are not installed when WITH_FILTERS is used. Replace an obsolete ftp site with one which works.
2001-03-23 21:02:17 +00:00
.endif
Update vile to version 8. This adds support for PERL scripts but requires perl5. Install the documentation and macros in reasonable places. NOTE: If you are running -current then you may have to re-install perl5 to reflect the new /usr/lib/aout, otherwise the make of vile with the optional PERL support could fail. I was forced to do this in the course of testing.
1998-06-04 20:05:04 +00:00
Update to version 7.2
1997-09-06 19:55:22 +00:00
post-install:
Update vile to version 8. This adds support for PERL scripts but requires perl5. Install the documentation and macros in reasonable places. NOTE: If you are running -current then you may have to re-install perl5 to reflect the new /usr/lib/aout, otherwise the make of vile with the optional PERL support could fail. I was forced to do this in the course of testing.
1998-06-04 20:05:04 +00:00
.if !defined(NOPORTDOCS)
@if ! [ -d ${PREFIX}/share/doc/vile ]; then ${MKDIR} ${PREFIX}/share/doc/vile; fi
${INSTALL_DATA} ${WRKSRC}/doc/*.doc ${PREFIX}/share/doc/vile
.endif
@if ! [ -d ${PREFIX}/share/vile/macros ]; then ${MKDIR} ${PREFIX}/share/vile/macros; fi
${INSTALL_DATA} ${WRKSRC}/macros/*.rc ${PREFIX}/share/vile/macros
${INSTALL_SCRIPT} ${WRKSRC}/macros/vile-pager ${PREFIX}/share/vile/macros
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE}
1999-08-27 21:14:04 +00:00
@${ECHO_MSG} "Look in ${PREFIX}/share/doc/vile for documentation."
@${ECHO_MSG} "Look in ${PREFIX}/share/vile/macros for macros."
Update to version 7.2
1997-09-06 19:55:22 +00:00
Update to version 9.5q. Use OPTIONS.
2007-05-29 16:55:40 +00:00
.include <bsd.port.post.mk>
Reference in New Issue Copy Permalink