freebsd-ports/net/cvsup/Makefile

# New ports collection makefile for:	cvsup
# Version required:	16.1
# Date created:		7 August 1996
# Whom:			asami
#
# $FreeBSD$
#

DISTNAME=	cvsup-16.1
CATEGORIES=	devel net
MASTER_SITES=	ftp://ftp.freebsd.org/pub/FreeBSD/development/CVSup/sources/ \
		ftp://ftp.cs.tu-berlin.de/pub/FreeBSD/development/CVSup/sources/

MAINTAINER=	jdp@FreeBSD.org

.ifdef NO_X11
M3FLAGS+=	-DNOGUI
BUILD_DEPENDS=	${L1}libm3tcp${L2}:${PORTSDIR}/lang/pm3-net
RUN_DEPENDS=	${L1}libm3tcp${L2}:${PORTSDIR}/lang/pm3-net
.else
BUILD_DEPENDS=	${L1}libm3formsvbt${L2}:${PORTSDIR}/lang/pm3-forms
RUN_DEPENDS=	${L1}libm3formsvbt${L2}:${PORTSDIR}/lang/pm3-forms
.endif

MAKE_ARGS+=	PREFIX=${PREFIX} M3FLAGS="${M3FLAGS}"
MAN1=		cvpasswd.1 cvsup.1
MAN8=		cvsupd.8

L1=		${PREFIX}/lib/m3/${TARGET}/
SOVERSION=	7

# To link the programs statically:
#M3FLAGS+=	-DSTATIC

.include <bsd.port.pre.mk>

.if ${PORTOBJFORMAT} == "aout"
L2=		.so.${SOVERSION}.0
TARGET=		FreeBSD2
TARGETDIR=	freebsd-2
WORDSIZE=	32
.elif ${ARCH} == "i386"
L2=		.so.${SOVERSION}
.if ${OSVERSION} < 400011
TARGET=		FreeBSD3
TARGETDIR=	freebsd-3
.else
TARGET=		FreeBSD4
TARGETDIR=	freebsd-4
.endif
WORDSIZE=	32
.elif ${ARCH} == "alpha"
.if ${OSVERSION} < 400011
BROKEN=		Not supported on older versions of FreeBSD/Alpha
.endif
CFLAGS+=	-mieee
L2=		.so.${SOVERSION}
TARGET=		FBSD_ALPHA
TARGETDIR=	fbsd-alpha
WORDSIZE=	64
.endif

pre-fetch:
.if empty(TARGET)
	@${ECHO_MSG} "Cannot determine M3 target for this architecture"
	@${FALSE}
.endif
.ifndef NO_X11
	@${ECHO_MSG} -n "To build this port without X11 (and without the GUI),"
	@${ECHO_MSG} " define \"NO_X11\"."
.endif
	@${TRUE}

.include <bsd.port.post.mk>
JDP's cvsup. Beware, this port depends on modula-3! 1996-08-08 09:25:56 +00:00			`# New ports collection makefile for: cvsup`
Update for new version of CVSup (16.0 -> 16.1). Also add NOT_FOR_ARCHS=alpha because I'm not caught up on that platform yet. 1999-12-10 18:40:39 +00:00			`# Version required: 16.1`
Update for new release 13.5 of CVSup. Correct the "Date created" comment in the Makefile. 1996-11-01 04:14:04 +00:00			`# Date created: 7 August 1996`
JDP's cvsup. Beware, this port depends on modula-3! 1996-08-08 09:25:56 +00:00			`# Whom: asami`
			`#`
$Id$ -> $FreeBSD$ 1999-08-30 14:24:37 +00:00			`# $FreeBSD$`
JDP's cvsup. Beware, this port depends on modula-3! 1996-08-08 09:25:56 +00:00			`#`

Update for new version of CVSup (16.0 -> 16.1). Also add NOT_FOR_ARCHS=alpha because I'm not caught up on that platform yet. 1999-12-10 18:40:39 +00:00			`DISTNAME= cvsup-16.1`
Use MAN? macros. CATEGORIES+= -> CATEGORIES. 1996-11-18 11:44:27 +00:00			`CATEGORIES= devel net`
Update for new version of CVSup (16.0 -> 16.1). Also add NOT_FOR_ARCHS=alpha because I'm not caught up on that platform yet. 1999-12-10 18:40:39 +00:00			`MASTER_SITES= ftp://ftp.freebsd.org/pub/FreeBSD/development/CVSup/sources/ \`
			`ftp://ftp.cs.tu-berlin.de/pub/FreeBSD/development/CVSup/sources/`
JDP's cvsup. Beware, this port depends on modula-3! 1996-08-08 09:25:56 +00:00
			`MAINTAINER= jdp@FreeBSD.org`

Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`.ifdef NO_X11`
			`M3FLAGS+= -DNOGUI`
			`BUILD_DEPENDS= ${L1}libm3tcp${L2}:${PORTSDIR}/lang/pm3-net`
			`RUN_DEPENDS= ${L1}libm3tcp${L2}:${PORTSDIR}/lang/pm3-net`
			`.else`
			`BUILD_DEPENDS= ${L1}libm3formsvbt${L2}:${PORTSDIR}/lang/pm3-forms`
			`RUN_DEPENDS= ${L1}libm3formsvbt${L2}:${PORTSDIR}/lang/pm3-forms`
			`.endif`
JDP's cvsup. Beware, this port depends on modula-3! 1996-08-08 09:25:56 +00:00
Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`MAKE_ARGS+= PREFIX=${PREFIX} M3FLAGS="${M3FLAGS}"`
Update for new release 16.0 of CVSup. (It was 15.4.2 before.) Adjust MASTER_SITES. 1999-02-10 02:48:01 +00:00			`MAN1= cvpasswd.1 cvsup.1`
Update port for CVSup release 15.3 (from 15.2). Approved by: asami 1998-03-24 04:20:27 +00:00			`MAN8= cvsupd.8`

Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`L1= ${PREFIX}/lib/m3/${TARGET}/`
			`SOVERSION= 7`

			`# To link the programs statically:`
			`#M3FLAGS+= -DSTATIC`

			`.include <bsd.port.pre.mk>`

			`.if ${PORTOBJFORMAT} == "aout"`
			`L2= .so.${SOVERSION}.0`
			`TARGET= FreeBSD2`
			`TARGETDIR= freebsd-2`
			`WORDSIZE= 32`
			`.elif ${ARCH} == "i386"`
			`L2= .so.${SOVERSION}`
			`.if ${OSVERSION} < 400011`
			`TARGET= FreeBSD3`
			`TARGETDIR= freebsd-3`
Instead of trying to auto-detect whether X11 is installed, require the user to define NO_X11 if it is not. The auto-detection scheme caused problems for Satoshi's port building system. 1999-01-28 05:39:19 +00:00			`.else`
Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`TARGET= FreeBSD4`
			`TARGETDIR= freebsd-4`
			`.endif`
			`WORDSIZE= 32`
			`.elif ${ARCH} == "alpha"`
			`.if ${OSVERSION} < 400011`
			`BROKEN= Not supported on older versions of FreeBSD/Alpha`
			`.endif`
			`CFLAGS+= -mieee`
			`L2= .so.${SOVERSION}`
			`TARGET= FBSD_ALPHA`
			`TARGETDIR= fbsd-alpha`
			`WORDSIZE= 64`
			`.endif`

Instead of trying to auto-detect whether X11 is installed, require the user to define NO_X11 if it is not. The auto-detection scheme caused problems for Satoshi's port building system. 1999-01-28 05:39:19 +00:00			`pre-fetch:`
Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`.if empty(TARGET)`
			`@${ECHO_MSG} "Cannot determine M3 target for this architecture"`
			`@${FALSE}`
			`.endif`
			`.ifndef NO_X11`
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE} 1999-08-27 22:30:39 +00:00			`@${ECHO_MSG} -n "To build this port without X11 (and without the GUI),"`
			`@${ECHO_MSG} " define \"NO_X11\"."`
Automatically select the no-GUI version to build if X11 is not installed. PR: closes ports/4178 1998-06-06 20:33:21 +00:00			`.endif`
Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`@${TRUE}`
Automatically select the no-GUI version to build if X11 is not installed. PR: closes ports/4178 1998-06-06 20:33:21 +00:00
Build this port with the PM3 Modula-3 system instead of the older DEC SRC one. PM3 is the one that's actively maintained these days. This port now works on FreeBSD-2, -3, and -4 on the i386, and FreeBSD-4 on the Alpha. 2000-02-13 23:31:33 +00:00			`.include <bsd.port.post.mk>`