freebsd-ports/emulators/vmware3/files/Hints.FreeBSD

Here is a list of some useful hints on using VMware on FreeBSD.

- Full screen mode does not work. Don't do it.

- Raw disk may not work.  Use virtual or plain disk instead.

- The vmware-mount.pl utility does not work. If you want to mount
the "disk" while vmware is not running, you must use plain disks
instead of virtual ones. Set up a 63 sector file as an "mbr"
section, then a file for each partition on the "plain" disk.
To mount the "disk", use vnconfig -c /dev/vn__ file and
then mount the vn device.

If you are setting up a plain disk as a workaround for the broken
raw disks, you will need to set up the disk description file
by hand, as the wizard will complain. Here is a sample one:

DRIVETYPE	ide
CYLINDERS	16383
HEADS		16
SECTORS		63
ACCESS "/path/disk.mbr" 0 63
ACCESS "/dev/rad0s1" 63 4192902
RDONLY "/dev/null" 4192965 12305790

The geometry must be the physical geometry reported by the disk.
grep ad0 /var/run/dmesg.boot and look for the 3 numbers in the
brackets. They are the C/H/S.

In the example above, "disk.mbr" is file used to keep a replacement
MBR for the disk. You can use dd if=/dev/rad0 bs=1b count=63 of=mbr
to create it if you like. The reason is so that the guest's decision
about which OS you booted last is different than the host's (this is
for the FreeBSD boot manager). You can also feel free to replace
the MBR with the standard boot manager if you like. fdisk(8) and a vn
device can help with this, though you will have to be sure and
supply the correct geometry to fdisk(8) since the vn device won't
support those calls. This time it's the BIOS "fake" geometry.
Watch out!

As you can see, the 1st partition simply is a FreeBSD slice device.
The first number after the filename is the offset in blocks where the
given file starts in the plain disk. The last number on the line is
the length of the block. If you are using a file, its length must
be equal to this number * 512.

The last entry is an example of how to block out partitions you don't
want vmware to mess with. Why do this instead of simply making the
C/H/S numbers for the disk smaller? Because then the guest's BIOS
might not make the same choices about the "fake" geometry to use,
which would prevent the OS from booting in most cases.

You might be able to follow the same procedure to make SCSI drives
work. It is slightly less likely to work as SCSI vendors often
differ as to how they set up BIOS geometries. Your raw device
must end up having the same BIOS geometry as a Bustek SCSI
controller, which is the device vmware virtually supplies as the
host adapter.

- It is a good idea to disconnect removable media devices (CDROMs
and Floppies and the like) from the "guest" either when they are
empty or when you're about to eject the media.

- Under FreeBSD, floppy device should be configured as follows:

	Type: file
	Path: /dev/rfd0

(Obtain the write permission on /dev/rfd0 if you write floppy disks)

- Consider making a link /compat/linux/tmp if your /tmp doesn't have
sufficient free space or is slow.  VMware uses /tmp to back the VM's
memory.

e.g.
	ln -s /usr/tmp /compat/linux/tmp

Also, be very careful if /tmp/ is a tmpfs partition. vmware
creates a file that is about 25% larger than the guest's RAM size,
unlinks it and does mmap on it. Such a large, active file in
tmpfs can lead to deadlocks.

-- 
Akinori -Aki- MUSHA <knu@idaemons.org>
Nick Sayer <nsayer@freebsd.org>