- Make qmail use USERS and GROUPS [1]

- Add my local_distfiles as a MASTER_SITES to ucspi-ssl

PR:		ports/157622 [1]
Submitted by:	crees [1]

mail/qmail-ldap/Makefile

@@ -19,6 +19,9 @@ RUN_DEPENDS=	${LOCALBASE}/bin/svscan:${PORTSDIR}/sysutils/daemontools \
 CONFLICTS=	emboss-[0-9]* digest-[0-9]* qmail-[0-9]* qmail-mysql-[0-9]* \
 		qmail-spamcontrol-[0-9]* qmail-tls-[0-9]*
 
+EXTRA_PATCHES+=	${MASTERDIR}/files/patch-Makefile \
+		${MASTERDIR}/files/patch-auto_uids-c-dist
+
 USE_OPENLDAP=	yes
 SLAVE_LDAP=	yes
 

mail/qmail-spamcontrol/Makefile

@@ -20,7 +20,9 @@ COMMENT=	Qmail MTA with SpamControl patches
 
 CONFLICTS=	qmail-[0-9]* qmail-ldap-[0-9]* qmail-mysql-[0-9]* qmail-tls-[0-9]*
 
-EXTRA_PATCHES+=	${MASTERDIR}/files/patch-install.c
+EXTRA_PATCHES+=	${MASTERDIR}/files/patch-install.c \
+		${MASTERDIR}/files/patch-Makefile \
+		${MASTERDIR}/files/patch-auto_uids-c-dist
 
 # Distfiles
 QMAIL_DIST=		${PORTNAME}-${QMAIL_VERSION}${EXTRACT_SUFX}

mail/qmail/Makefile

@@ -26,6 +26,12 @@ MAKE_JOBS_UNSAFE=	yes
 
 PORTSCOUT=	skipv:1.04
 
+USERS=		alias
+.for usersuffix in d l p q r s
+USERS+=		${PORTNAME}${usersuffix}
+.endfor
+GROUPS=		${PORTNAME} qnofiles
+
 .if defined(SLAVE_LDAP) || \
     defined(SLAVE_MYSQL)
 BARRIER_MAILDIRQUOTA_PATCH=	yes
@@ -246,10 +252,8 @@ SLAVEPORT_LINE=	${PKGMESSAGE_SUFFIX}
 SLAVEPORT_LINE=	spamcontrol
 .endif
 
-SUB_FILES+=	mailer.conf.sample bootfiles.sed enable-qmail
-SUB_LIST+=	ECHO_CMD=${ECHO_CMD}
-# pkg-install could not be added to SUB_FILES because it's executed on do-configure:
-PKGINSTALL?=	${WRKDIR}/pkg-install
+SUB_FILES+=	mailer.conf.sample bootfiles.sed enable-qmail pkg-install
+SUB_LIST+=	ECHO_CMD=${ECHO_CMD} RCDLINK=${RCDLINK}
 
 .if defined(PKGMESSAGE_SUFFIX)
 SUB_FILES+=	pkg-message-${PKGMESSAGE_SUFFIX}
@@ -512,9 +516,11 @@ PATCHFILES+=	enhacelogging-ldap-${LDAP_PATCH_DATE}_4.patch:ldapenhacelog
 .endif
 
 .if defined(SLAVE_SPAMCONTROL)
-MASTER_SITES+=	http://www.superscript.com/ucspi-ssl/:ucspi_ssl \
+MASTER_SITES+=	${MASTER_SITE_LOCAL:S/$/:ucspi_ssl/} \
+		http://www.superscript.com/ucspi-ssl/:ucspi_ssl \
 		http://dev.qmailrocks.org/downloads/qmailrocks_3.0-beta/:ucspi_ssl \
 		${MASTER_SITE_GENTOO:S/$/:ucspi_ssl/}
+MASTER_SITE_SUBDIR+=	garga/ucspi-ssl/:ucspi_ssl
 DISTFILES+=	ucspi-ssl-0.70.tar.gz:ucspi_ssl
 
 MASTER_SITES+=	http://www.fehcom.de/qmail/spamcontrol/:ucspi_ssl_patch
@@ -724,9 +730,6 @@ post-patch:
 .endif
 
 do-configure:
-	@${SED} -e 's,%%RCDLINK%%,${RCDLINK},g; s,%%LOCALBASE%%,${LOCALBASE},g' \
-		${FILESDIR}/pkg-install.in > ${WRKDIR}/pkg-install
-	@${SETENV} PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
 	@${ECHO_CMD} "${CC} ${CFLAGS}" > ${WRKSRC}/conf-cc
 	@${ECHO_CMD} ${PREFIX} > ${WRKSRC}/conf-qmail
 .if defined(WITH_BIG_CONCURRENCY_PATCH) \

mail/qmail/files/patch-Makefile

@@ -0,0 +1,31 @@
+$FreeBSD$
+
+This turns off the auto-finding of UIDs -- we shouldn't have the users
+until pre-install!
+
+We use a new file, auto_uids.c.dist to record our UIDs
+
+--- Makefile.orig	2011-06-05 10:00:58.752481173 +0100
++++ Makefile	2011-06-05 10:04:27.265135390 +0100
+@@ -110,19 +110,8 @@
+ compile auto_split.c
+ 	./compile auto_split.c
+ 
+-auto_uids.c: \
+-auto-uid auto-gid conf-users conf-groups
+-	( ./auto-uid auto_uida `head -1 conf-users` \
+-	&&./auto-uid auto_uidd `head -2 conf-users | tail -1` \
+-	&&./auto-uid auto_uidl `head -3 conf-users | tail -1` \
+-	&&./auto-uid auto_uido `head -4 conf-users | tail -1` \
+-	&&./auto-uid auto_uidp `head -5 conf-users | tail -1` \
+-	&&./auto-uid auto_uidq `head -6 conf-users | tail -1` \
+-	&&./auto-uid auto_uidr `head -7 conf-users | tail -1` \
+-	&&./auto-uid auto_uids `head -8 conf-users | tail -1` \
+-	&&./auto-gid auto_gidq `head -1 conf-groups` \
+-	&&./auto-gid auto_gidn `head -2 conf-groups | tail -1` \
+-	) > auto_uids.c.tmp && mv auto_uids.c.tmp auto_uids.c
++auto_uids.c:
++	mv auto_uids.c.dist auto_uids.c
+ 
+ auto_uids.o: \
+ compile auto_uids.c

mail/qmail/files/patch-auto_uids-c-dist

@@ -0,0 +1,16 @@
+--- /dev/null		1970-01-01 01:00:00.000000000 +0100
++++ auto_uids.c.dist	2011-06-05 10:29:16.425936277 +0100
+@@ -0,0 +1,13 @@
++/* These values are hard-coded here, which looks bad until you *
++ * realise that they're hard-coded in ${PORTSDIR}/?IDs anyway. */
++/* $FreeBSD$ */
++int auto_uida = 81;
++int auto_uidd = 82;
++int auto_uidl = 83;
++int auto_uido = 0;
++int auto_uidp = 84;
++int auto_uidq = 85;
++int auto_uidr = 86;
++int auto_uids = 87;
++int auto_gidq = 82;
++int auto_gidn = 81;

mail/qmail/files/pkg-install.in

@@ -6,66 +6,8 @@
 export PATH=/bin:/sbin:/usr/bin:/usr/sbin
 
 PREFIX=${PKG_PREFIX:-%%PREFIX%%}
-UID=`id -u`
 
-addGroup() {
-	NGROUP=$1
-	NGID=$2
-
-	if ! pw groupshow ${NGROUP} >/dev/null 2>&1; then
-		if ! pw groupadd ${NGROUP} -g ${NGID} >/dev/null 2>&1; then
-			echo "Failed to add group '${NGROUP}' as gid '${NGID}'"
-			exit 1
-		fi
-	fi
-
-	CHECKGID=`pw groupshow ${NGROUP} 2>/dev/null | cut -d: -f3`
-	if [ "${CHECKGID}" != "${NGID}" ]; then
-		echo "Group '$NGROUP' should have gid '$NGID'"
-		exit 1
-	fi
-}
-
-addUser() {
-	NUSER=$1
-	NUID=$2
-	NGROUP=$3
-	NHOME=${4:-${PREFIX}}
-
-	if ! pw usershow ${NUSER} >/dev/null 2>&1; then
-		if ! pw useradd ${NUSER} -g ${NGROUP} -d ${NHOME} -s /nonexistent -u ${NUID} >/dev/null 2>&1; then
-			echo "Failed to add user '${NUSER}' as uid '${NUID}'"
-			exit 1
-		fi
-	fi
-
-	CHECKUID=`pw usershow ${NUSER} 2>/dev/null | cut -d: -f3`
-	if [ "${CHECKUID}" != "${NUID}" ]; then
-		echo "User '$NUSER' should have uid '$NUID'"
-		exit 1
-	fi
-}
-
-if [ "$UID" != "0" ]; then
-	echo "It is necessary to add missing qmail users/groups at"
-	echo "this stage.  Please either add them manually or retry"
-	echo "as root."
-	exit 1
-fi
-
-if [ "$2" = "PRE-INSTALL" ]; then
-	addGroup qmail    82
-	addGroup qnofiles 81
-
-	addUser alias  81 qnofiles ${PREFIX}/alias
-	addUser qmaild 82 qnofiles
-	addUser qmaill 83 qnofiles
-	addUser qmailp 84 qnofiles
-	addUser qmailq 85 qmail
-	addUser qmailr 86 qmail
-	addUser qmails 87 qmail
-
-elif [ "$2" = "POST-INSTALL" ]; then
+if [ "$2" = "POST-INSTALL" ]; then
 	${PREFIX}/configure/install x
 
 	[ -e ${PREFIX}/control/me ] || (cd ${PREFIX}/configure && ./config)