APC smart UPS monitoring daemon.

PR:            4662
Submitted by:  Daniel Baker <dbaker@neosoft.com> and myself

sysutils/upsd/Makefile

@@ -0,0 +1,30 @@
+# New ports collection makefile for:    upsd
+# Version required:     2.0.1.6
+# Date created:         11 Jul 1996
+# Whom:                 alexis
+#
+# $Id$
+#
+
+DISTNAME=	upsd-2.0.1.6
+PKGNAME=	upsd-2.0
+CATEGORIES=	sysutils
+MASTER_SITES=	ftp://www.ww.net/pub/wildwind/upsd/ \
+		http://www.cre8tivegroup.com/ \
+		ftp://ftp.sw.ru/pub/unix/upsd/
+
+MAINTAINER=	alexis@ww.net
+
+WRKSRC=		${WRKDIR}/upsd-2.0
+
+pre-build:
+	@${MV} ${WRKSRC}/config.h ${WRKSRC}/config.h.orig
+	@sed -e "s!@prefix@!${PREFIX}!g" ${WRKSRC}/config.h.orig > ${WRKSRC}/config.h
+
+post-install:
+	if [ ! -f ${PREFIX}/etc/upsd.conf ] ; then \
+		${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 644 \
+			${FILESDIR}/upsd.conf ${PREFIX}/etc/upsd.conf; \
+	fi
+
+.include <bsd.port.mk>

sysutils/upsd/distinfo

@@ -0,0 +1 @@
+MD5 (upsd-2.0.1.6.tar.gz) = 98e46c6f86a87cb441931e1e4bf355c5

sysutils/upsd/files/patch-aa

@@ -0,0 +1,12 @@
+--- Makefile.orig	Mon Feb 23 17:32:56 1998
++++ Makefile	Mon Feb 23 17:33:50 1998
+@@ -8,8 +8,7 @@
+ 
+ PROG=	upsd
+ 
+-BINDIR=	/usr/local/sbin
+-MANDIR=	/usr/local/share/man
++BINDIR=	${PREFIX}/sbin
+ NOMAN=	noway
+ 
+ #DEBUG=	-g -DDEBUG

sysutils/upsd/files/patch-ab

@@ -0,0 +1,11 @@
+--- config.h.orig	Mon Feb 23 17:50:34 1998
++++ config.h	Mon Feb 23 17:50:49 1998
+@@ -8,7 +8,7 @@
+  */
+ 
+ #ifndef DEBUG
+-#define	_PATH_UPSD_CONF	"/etc/upsd.conf"
++#define	_PATH_UPSD_CONF	"@prefix@/upsd.conf"
+ #define	_PATH_UPSD_PID	"/var/run/upsd.pid"
+ #else
+ #define	_PATH_UPSD_CONF	"sample/upsd.conf"

sysutils/upsd/files/upsd.conf

@@ -0,0 +1,100 @@
+# $Id: upsd.conf,v 2.0 1996/01/28 11:50:37 alexis Exp $
+#
+# UPS Daemon
+# The Wild Wind Communications, 1995, 1996
+#
+# See file LICENSE for the distribution terms of this software.
+#
+
+ups "smart-ups" (230) proto "apc-smart" {
+	device			"/dev/cuaa0"
+	speed			2400
+	read-timeout		2
+	write-block-size	1
+	write-block-delay	50
+	queue-size		64
+}
+
+every 5 { # check events every 5 seconds
+	nop
+}
+
+on "initialize" != "SM" {
+	poll "initialize"
+	after 60 every 60 {
+		log emerg "Cannot put the UPS into smart mode!"
+	}
+}
+
+every 600 {
+	tune "high-transfer-point"		264
+	tune "low-transfer-point"		196
+	tune "line-alarm"			"0"
+	tune "line-sensitivity"			"L"
+	tune "low-batteries-duration"		2
+	tune "nominal-voltage"			220
+	tune "shutdown-delay"			20
+	tune "wakeup-batteries-capacity"	25
+	tune "wakeup-delay"			0
+#	tune "batteries-replaced"		"01/01/77"
+#	tune "label"				"WildWind"
+}
+
+every 300 {			# poll the UPS
+	poll "last-test"
+#	poll "light-test"
+	poll "line-frequency"
+	poll "line-maxvac"
+	poll "line-minvac"
+	poll "line-voltage"
+	poll "load"
+	poll "recharge"
+	poll "temperature"
+	poll "vdc"
+	poll "voltage"
+
+	log notice "last test: %last-test%, light test: %light-test%"
+	log notice "frequency: %line-frequency%, maxvac: %line-maxvac%, minvac: %line-minvac%, voltage: %line-voltage%"
+	log notice "load: %load%, recharge: %recharge%, temp: %temperature%, vdc: %vdc%, output voltage: %voltage%"
+
+	on "load" > 95 {
+		log alert "UPS load is too high: %load%"
+	}
+}
+
+on "line-fail" {
+	log emerg "*** ALERT! Source power line failed, save your work! ***"
+}
+
+on "line-fail" after 30 {
+	log emerg "*** ALERT! System shutdown in 30 seconds, LOGOUT NOW! ***"
+}
+
+on "line-restore" {
+	log emerg "Source power line restored, you may continue your work."
+}
+
+on "line-fail" after 60 {
+	log emerg "*** ALERT! THE SYSTEM IS SHUTTING DOWN! ***"
+
+	poll "shutdown"
+	poll "shutdown"
+	poll "power-test"
+	poll "power-test"
+	poll "shutdown"
+	poll "shutdown"
+
+	sleep 2
+
+	exec "/sbin/halt &"
+
+	poll "power-test"
+	poll "shutdown"
+	poll "power-test"
+	poll "shutdown"
+	poll "power-test"
+	poll "shutdown"
+	poll "power-test"
+
+	sleep 1000	# let us wait peacefully
+}

sysutils/upsd/pkg-comment

@@ -0,0 +1 @@
+APC Smart UPS Monitoring Daemon

sysutils/upsd/pkg-descr

@@ -0,0 +1,3 @@
+upsd is a daemon with flexible configuration which lets you to
+shutdown your system properly when source power line fails and
+measure its frequency, voltage etc

sysutils/upsd/pkg-plist

@@ -0,0 +1,2 @@
+etc/upsd.conf
+sbin/upsd