- Update to 3.2.0

PR:		ports/150782
Submitted by:	Pavel Pankov <pankov_p@mail.ru> (maintainer)

www/ziproxy/Makefile

@@ -5,7 +5,7 @@
 # $FreeBSD$
 
 PORTNAME=		ziproxy
-PORTVERSION=		3.1.3
+PORTVERSION=		3.2.0
 CATEGORIES=		www
 MASTER_SITES=		SF/${PORTNAME}/${PORTNAME}/${PORTNAME}-${PORTVERSION}
 
@@ -38,41 +38,43 @@ USE_RC_SUBR=		ziproxy
 
 SUB_FILES+=		pkg-message
 
-OPTIONS+=		JPEG2000 "Build with JPEG2000 support" on
+OPTIONS+=		JPEG2000 "Build with JPEG2000 support" on \
+			SASL "Build with SASL auth support" on \
+			NAMESERVERS "Enable Nameservers config option" on
 
 ERROR_FILES=		400.html 403.html 404.html 407.html 408.html 409.html \
 			500.html 503.html
 SAMPLE_CONFIG_FILES=	bo_exception.list change_tos.list deny.list http.passwd \
 			noprocess.list replace.list replace_ct.list \
-			ziproxy.conf
+			ziproxy.conf sasl/ziproxy.conf
 
 post-patch:
-	@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
+	${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
 	                  -e 's|%%DATADIR%%|${DATADIR}|g' \
 		${WRKSRC}/etc/ziproxy/ziproxy.conf
 
 post-install:
-	@${MKDIR} ${PREFIX}/etc/ziproxy
+	${MKDIR} ${PREFIX}/etc/ziproxy/sasl
 .for FILE in ${SAMPLE_CONFIG_FILES}
-	@${INSTALL_DATA} ${WRKSRC}/etc/ziproxy/${FILE} ${PREFIX}/etc/ziproxy/${FILE}.sample
+	${INSTALL_DATA} ${WRKSRC}/etc/ziproxy/${FILE} ${PREFIX}/etc/ziproxy/${FILE}.sample
 .endfor
-	@if [ ! -f ${PREFIX}/etc/ziproxy/ziproxy.conf ]; then \
+	if [ ! -f ${PREFIX}/etc/ziproxy/ziproxy.conf ]; then \
 		${CP} -p ${WRKSRC}/etc/ziproxy/ziproxy.conf ${PREFIX}/etc/ziproxy/ziproxy.conf ; \
 	fi
 
 .if !defined(NOPORTDOCS)
-	@${MKDIR} ${DOCSDIR}
+	${MKDIR} ${DOCSDIR}
 .for FILE in ${PORTDOCS}
-	@${INSTALL_DATA} ${WRKSRC}/${FILE} ${DOCSDIR}/${DOC}
+	${INSTALL_DATA} ${WRKSRC}/${FILE} ${DOCSDIR}/${FILE}
 .endfor
 .endif
 
-	@${MKDIR} ${DATADIR}/error
+	${MKDIR} ${DATADIR}/error
 .for FILE in ${ERROR_FILES}
-	@${INSTALL_DATA} ${WRKSRC}/var/ziproxy/error/${FILE} ${DATADIR}/error/${FILE}
+	${INSTALL_DATA} ${WRKSRC}/var/ziproxy/error/${FILE} ${DATADIR}/error/${FILE}
 .endfor
 
-	@${INSTALL_SCRIPT} ${WRKSRC}/src/tools/ziproxy_genhtml_stats.sh ${PREFIX}/bin
+	${INSTALL_SCRIPT} ${WRKSRC}/src/tools/ziproxy_genhtml_stats.sh ${PREFIX}/bin
 
 	@${CAT} ${PKGMESSAGE}
 
@@ -81,6 +83,21 @@ post-install:
 .if !defined(WITHOUT_JPEG2000)
 CONFIGURE_ARGS+=	--with-jasper
 LIB_DEPENDS+=		jasper.4:${PORTSDIR}/graphics/jasper
+.else
+CONFIGURE_ARGS+=	--without-jasper
+.endif
+
+.if !defined(WITHOUT_SASL)
+CONFIGURE_ARGS+=	--with-sasl2
+LIB_DEPENDS+=		sasl2.2:${PORTSDIR}/security/cyrus-sasl2
+.else
+CONFIGURE_ARGS+=	--without-sasl2
+.endif
+
+.if !defined(WITHOUT_NAMESERVERS)
+CONFIGURE_ARGS+=	--enable-nameservers
+.else
+CONFIGURE_ARGS+=	--disable-nameservers
 .endif
 
 .include <bsd.port.post.mk>

www/ziproxy/distinfo

@@ -1,3 +1,3 @@
-MD5 (ziproxy-3.1.3.tar.bz2) = dd09206461dc9b11833ff2823943ac9f
-SHA256 (ziproxy-3.1.3.tar.bz2) = d5cbb42de327c66c76b6332cb06ca294df8c5130481500c6e93788951211b7a2
-SIZE (ziproxy-3.1.3.tar.bz2) = 261227
+MD5 (ziproxy-3.2.0.tar.bz2) = fb5fd0ba0ddd8412cd3a767ac63075ff
+SHA256 (ziproxy-3.2.0.tar.bz2) = b2b67ec63169e24e523aac7bf7bd576b20786ae281f0f8b87ae518a093bde87e
+SIZE (ziproxy-3.2.0.tar.bz2) = 264466

www/ziproxy/files/patch-ziproxy.conf

@@ -1,5 +1,5 @@
---- etc/ziproxy/ziproxy.conf.orig	2010-03-08 12:23:20.000000000 +0300
-+++ etc/ziproxy/ziproxy.conf	2010-03-12 23:51:38.000000000 +0300
+--- etc/ziproxy/ziproxy.conf.orig	2010-09-04 06:06:15.000000000 +0400
++++ etc/ziproxy/ziproxy.conf	2010-09-10 00:52:13.000000000 +0400
 @@ -12,12 +12,12 @@
  ## If you have more than one network interface,
  ## it's useful for restricting to which interface you want to bind to.
@@ -24,16 +24,25 @@
  
  ## This is the content-type list of data that should
  ## have their traffic "differentiated"
-@@ -261,7 +261,7 @@
- ## HTTP auth file
- ## Should contain user:pass pairs, lines no longer than 128 chars
- ## Password is unencrypted
--# PasswdFile="/etc/ziproxy/http.passwd"
-+# PasswdFile="%%PREFIX%%/etc/ziproxy/http.passwd"
+@@ -279,7 +279,7 @@
+ ##
+ ## Default: (undefined)
+ ## See also: AuthMode
+-# AuthPasswdFile = "/etc/ziproxy/http.passwd"
++# AuthPasswdFile = "%%PREFIX%%/etc/ziproxy/http.passwd"
+ 
+ ## Path to Ziproxy's SASL configuration file, where
+ ## a file named "ziproxy.conf" (not related to this one)
+@@ -288,7 +288,7 @@
+ ##
+ ## Default: (default SASL setting, OS-dependent, may be /etc/sasl2/)
+ ## See also: AuthMode
+-# AuthSASLConfPath = "/etc/ziproxy/sasl/"
++# AuthSASLConfPath = "%%PREFIX%%/etc/ziproxy/sasl/"
  
  ## Forward everything to another proxy server.
  ## Modifications/compression is still applied.
-@@ -299,7 +299,7 @@
+@@ -330,7 +330,7 @@
  ## This option has no effect if BindOutgoing is not used.
  ## Default: empty, no hosts are exempted.
  ## See also: BindOutgoingExAddr
@@ -42,7 +51,7 @@
  
  ## Defines a specific IP to be bound to for hosts specified in BindOutgoingExList.
  ## As with BindOutgoing, this IP must be a local IP from the server running Ziproxy.
-@@ -664,7 +664,7 @@
+@@ -702,7 +702,7 @@
  ## *** THIS IS NOT SUPPOSED TO BE A DEFINITIVE SOLUTION TO INCOMPATIBILITIES ***
  ##
  ## Default: empty (no file specified, inactive)
@@ -51,7 +60,7 @@
  
  ## This option specifies a file containing a list of URLs which its
  ## data should be intercepted and replaced by another.
-@@ -683,7 +683,7 @@
+@@ -721,7 +721,7 @@
  ##
  ## Default: empty (no file specified, inactive)
  ## See also: URLReplaceDataCT
@@ -60,7 +69,7 @@
  
  ## Same as URLReplaceData, except it will only replace the data
  ## from matching URLs if the content-type matches
-@@ -697,7 +697,7 @@
+@@ -735,7 +735,7 @@
  ##
  ## Default: empty (no file specified, inactive)
  ## See also: URLReplaceDataCTList, URLReplaceData
@@ -69,7 +78,7 @@
  
  ## List of content-types to use with the URLReplaceDataCT option.
  ## This option is required by URLReplaceDataCT.
-@@ -723,7 +723,7 @@
+@@ -761,7 +761,7 @@
  ## A "access denied" 403 error will be returned when trying to access
  ## one of those URLs.
  ## Default: empty (no file specified, inactive)
@@ -78,7 +87,7 @@
  
  ## Custom HTTP Error Messages
  ## Define here the full path to the HTML file which should be
-@@ -731,21 +731,21 @@
+@@ -769,21 +769,21 @@
  ## Note: The internal defaults give more precise error messages.
  ##
  ## 400 - Bad request (malformed URL, or unknown URL type)

www/ziproxy/pkg-descr

@@ -2,6 +2,10 @@ Ziproxy is forwarding, non-caching, compressing HTTP proxy server.
 Basically it squeezes images by converting them to lower quality JPEGs or 
 JPEG 2000 and compresses (gzip) HTML and other text-like data.
 It also provides other features such as: HTML/JS/CSS optimization, preemptive 
-hostname resolution, transparent proxying and more.
+hostname resolution, transparent proxying, IP ToS marking (QoS), Ad-Blocker, 
+detailed logging and more.
+Ziproxy does not require a client software and provides acceleration for any 
+web browser, any operational system.
+
 
 WWW: http://ziproxy.sourceforge.net/

www/ziproxy/pkg-plist

@@ -1,7 +1,7 @@
 bin/ziproxy
 bin/ziproxylogtool
 bin/ziproxy_genhtml_stats.sh
-@exec mkdir -p %D/etc/ziproxy
+@exec mkdir -p %D/etc/ziproxy/sasl
 etc/ziproxy/bo_exception.list.sample
 etc/ziproxy/change_tos.list.sample
 etc/ziproxy/deny.list.sample
@@ -12,6 +12,8 @@ etc/ziproxy/replace_ct.list.sample
 @unexec if cmp -s %D/etc/ziproxy/ziproxy.conf.sample %D/etc/ziproxy/ziproxy.conf; then rm -f %D/etc/ziproxy/ziproxy.conf; fi
 @exec if [ ! -f %D/etc/ziproxy/ziproxy.conf ] ; then cp -p %D/%F %B/ziproxy.conf; fi
 etc/ziproxy/ziproxy.conf.sample
+etc/ziproxy/sasl/ziproxy.conf.sample
+@dirrmtry etc/ziproxy/sasl
 @dirrmtry etc/ziproxy
 %%DATADIR%%/error/400.html
 %%DATADIR%%/error/403.html