- Update to 3.14.2

- Now the port build depends on devel/makedepend
- Utilize ETCDIR for Makefile and pkg-plist
- Move pkg-message to FILESDIR
- No need to use USE_GETTEXT=yes, because port doesn't install any mo files
and --enable-nls option doesn't help. With --with-included-gettext apcupsd
doesn't build.

PR:		ports/116774
Submitted by:	Alexander Logvinov

sysutils/apcupsd/Makefile

@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	apcupsd
-PORTVERSION=	3.14.1
+PORTVERSION=	3.14.2
 CATEGORIES=	sysutils
 MASTER_SITES=	${MASTER_SITE_SOURCEFORGE:S/$/:src_sf/g} \
 		http://sce-tindy.tecnik93.com/FreeBSD/ports/${PORTNAME}/sources/:src_bk \
@@ -21,14 +21,16 @@ IGNOREFILES=	${PORTNAME}.pdf
 MAINTAINER=	itetcu@FreeBSD.org
 COMMENT=	A daemon for controlling APC UPS
 
-USE_GETTEXT=	yes
+BUILD_DEPENDS=	makedepend:${PORTSDIR}/devel/makedepend
+
 USE_RC_SUBR=	apcupsd
+SUB_FILES=	pkg-message
 
 GNU_CONFIGURE=	yes
 CONFIGURE_ARGS=	--sbindir=${PREFIX}/sbin \
 		--with-nologin=/var/run \
 		--disable-install-distdir \
-		--sysconfdir=${PREFIX}/etc/apcupsd \
+		--sysconfdir=${ETCDIR} \
 		--with-serial-dev=/dev/usv
 
 CONFIGURE_ENV=	CPPFLAGS="-I${LOCALBASE}/include -L${LOCALBASE}/lib" \
@@ -51,7 +53,7 @@ CONFIGURE_ARGS+=	--enable-net
 .endif
 
 .if defined(WITH_CGI)
-CONFIGURE_ARGS+=	--enable-cgi --with-cgi-bin=${PREFIX}/etc/apcupsd/cgi
+CONFIGURE_ARGS+=	--enable-cgi --with-cgi-bin=${ETCDIR}/cgi
 LIB_DEPENDS+=		gd.4:${PORTSDIR}/graphics/gd
 PLIST_SUB+=		CGI=""
 .else
@@ -79,21 +81,21 @@ post-install:
 #	the package list. So the port could be removed without problems
 	for na in apccontrol commfailure mainsback mastertimeout \
 		  changeme commok masterconnect onbattery; do \
-		if [ -f ${PREFIX}/etc/apcupsd/$$na.orig ]; then \
-			if cmp -s ${PREFIX}/etc/apcupsd/$$na ${PREFIX}/etc/apcupsd/$$na.orig; then \
-				${ECHO_CMD} "etc/apcupsd/$$na.orig" >> ${TMPPLIST}; \
+		if [ -f ${ETCDIR}/$$na.orig ]; then \
+			if cmp -s ${ETCDIR}/$$na ${ETCDIR}/$$na.orig; then \
+				${ECHO_CMD} "%%ETCDIR%%/$$na.orig" >> ${TMPPLIST}; \
 			fi \
 		fi; \
 	done
-	@${ECHO_CMD} "@unexec if [ -d %D/etc/apcupsd ]; then ${ECHO_CMD} \"If you are permanently removing this port, you should do a ``rm -rf ${PREFIX}/etc/apcupsd`` to remove config files left.\" | ${FMT} ; fi" >> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec if [ -d %D/${ETCDIR_REL} ]; then ${ECHO_CMD} \"If you are permanently removing this port, you should do a ``rm -rf ${ETCDIR}`` to remove config files left.\" | ${FMT} ; fi" >> ${TMPPLIST}
 #	Install sample startup script
 #	If there is already a config file it is installed as ...new
 	for na in apcupsd.conf apcupsd.css hosts.conf multimon.conf; do \
-		if [ -f ${PREFIX}/etc/apcupsd/$$na ]; then \
-			if [ -f ${PREFIX}/etc/apcupsd/$$na.new ]; then \
-				${MV} ${PREFIX}/etc/apcupsd/$$na.new ${PREFIX}/etc/apcupsd/$$na.sample; \
+		if [ -f ${ETCDIR}/$$na ]; then \
+			if [ -f ${ETCDIR}/$$na.new ]; then \
+				${MV} ${ETCDIR}/$$na.new ${ETCDIR}/$$na.sample; \
 			else \
-				${CP} ${PREFIX}/etc/apcupsd/$$na ${PREFIX}/etc/apcupsd/$$na.sample; \
+				${CP} ${ETCDIR}/$$na ${ETCDIR}/$$na.sample; \
 			fi; \
 		fi; \
 	done
@@ -101,5 +103,6 @@ post-install:
 	@${MKDIR} ${DOCSDIR}
 	cd ${DISTDIR} && ${INSTALL_DATA} ${PORTNAME}.pdf ${DOCSDIR}
 .endif
+	@${CAT} ${PKGMESSAGE}
 
 .include <bsd.port.post.mk>

sysutils/apcupsd/distinfo

@@ -1,5 +1,5 @@
-MD5 (apcupsd-3.14.1.tar.gz) = 258eb7515a12de493bb8952bc6d2f4e1
-SHA256 (apcupsd-3.14.1.tar.gz) = 3d68ce2c387194a8d6d2afae40dbaa0c02a87992ac1bdbd2495b1b610266c123
-SIZE (apcupsd-3.14.1.tar.gz) = 4352400
+MD5 (apcupsd-3.14.2.tar.gz) = fd8785e7607d20cefa68dc20e44eebc4
+SHA256 (apcupsd-3.14.2.tar.gz) = 72605e54356ffe32dc24159b4094a5b7e5e978d2440edded8b01496af9caca50
+SIZE (apcupsd-3.14.2.tar.gz) = 4345034
 MD5 (apcupsd.pdf) = IGNORE
 SHA256 (apcupsd.pdf) = IGNORE

sysutils/apcupsd/files/apcupsd.in

@@ -28,7 +28,7 @@ load_rc_config $name
 : ${apcupsd_lockfile="/var/spool/lock/apcupsd.lock"}
 
 pidfile="/var/run/apcupsd.pid"
-required_files="%%PREFIX%%/etc/apcupsd/apcupsd.conf"
+required_files="%%ETCDIR%%/apcupsd.conf"
 command="%%PREFIX%%/sbin/apcupsd"
 
 run_rc_command "$1"

sysutils/apcupsd/files/pkg-message.in

@@ -1,14 +1,14 @@
 **********************************************************************
 Read the manual
 
-  ${PREFIX}/share/doc/apcupsd/manual.pdf
+  %%DOCSDIR%%/manual.pdf
 
 to do site specific configuration assigenments! Especially have a
 detailed look into the chapter describing the shutdown procedure.
 
-Sample files are installed in ${PREFIX}/etc/apcupsd. These files
+Sample files are installed in %%ETCDIR%%. These files
 must be copied and/or configured for a proper working apcupsd.
-You need to modify ${PREFIX}/etc/apcupsd/apcupsd.conf as follows:
+You need to modify %%ETCDIR%%/apcupsd.conf as follows:
 
   For serial cable: DEVICE /dev/cuadX (or /dev/cuaaX for [45.]x) 
   For USB cable: DEVICE (yes, leave it blank after DEVICE)

sysutils/apcupsd/pkg-plist

@@ -3,23 +3,23 @@ sbin/apcaccess
 sbin/apctest
 sbin/smtp
 %%POWERFL%%sbin/powerflute
-@unexec if cmp -s %D/etc/apcupsd/apcupsd.conf.sample %D/etc/apcupsd/apcupsd.conf; then rm -f %D/etc/apcupsd/apcupsd.conf; fi
-etc/apcupsd/apcupsd.conf.sample
-etc/apcupsd/apccontrol
-etc/apcupsd/changeme
-etc/apcupsd/commfailure
-etc/apcupsd/commok
-etc/apcupsd/onbattery
-etc/apcupsd/offbattery
-%%CGI%%@unexec if cmp -s %D/etc/apcupsd/apcupsd.css.sample %D/etc/apcupsd/apcupsd.css; then rm -f %D/etc/apcupsd/apcupsd.css; fi
-%%CGI%%etc/apcupsd/apcupsd.css.sample
-%%CGI%%@unexec if cmp -s %D/etc/apcupsd/hosts.conf.sample %D/etc/apcupsd/hosts.conf; then rm -f %D/etc/apcupsd/hosts.conf; fi
-%%CGI%%etc/apcupsd/hosts.conf.sample
-%%CGI%%@unexec if cmp -s %D/etc/apcupsd/multimon.conf.sample %D/etc/apcupsd/multimon.conf; then rm -f %D/etc/apcupsd/multimon.conf; fi
-%%CGI%%etc/apcupsd/multimon.conf.sample
-%%CGI%%etc/apcupsd/cgi/multimon.cgi
-%%CGI%%etc/apcupsd/cgi/upsfstats.cgi
-%%CGI%%etc/apcupsd/cgi/upsimage.cgi
-%%CGI%%etc/apcupsd/cgi/upsstats.cgi
-%%CGI%%@dirrm etc/apcupsd/cgi
-@dirrmtry etc/apcupsd
+@unexec if cmp -s %D/%%ETCDIR%%/apcupsd.conf.sample %D/%%ETCDIR%%/apcupsd.conf; then rm -f %D/%%ETCDIR%%/apcupsd.conf; fi
+%%ETCDIR%%/apcupsd.conf.sample
+%%ETCDIR%%/apccontrol
+%%ETCDIR%%/changeme
+%%ETCDIR%%/commfailure
+%%ETCDIR%%/commok
+%%ETCDIR%%/onbattery
+%%ETCDIR%%/offbattery
+%%CGI%%@unexec if cmp -s %D/%%ETCDIR%%/apcupsd.css.sample %D/%%ETCDIR%%/apcupsd.css; then rm -f %D/%%ETCDIR%%/apcupsd.css; fi
+%%CGI%%%%ETCDIR%%/apcupsd.css.sample
+%%CGI%%@unexec if cmp -s %D/%%ETCDIR%%/hosts.conf.sample %D/%%ETCDIR%%/hosts.conf; then rm -f %D/%%ETCDIR%%/hosts.conf; fi
+%%CGI%%%%ETCDIR%%/hosts.conf.sample
+%%CGI%%@unexec if cmp -s %D/%%ETCDIR%%/multimon.conf.sample %D/%%ETCDIR%%/multimon.conf; then rm -f %D/%%ETCDIR%%/multimon.conf; fi
+%%CGI%%%%ETCDIR%%/multimon.conf.sample
+%%CGI%%%%ETCDIR%%/cgi/multimon.cgi
+%%CGI%%%%ETCDIR%%/cgi/upsfstats.cgi
+%%CGI%%%%ETCDIR%%/cgi/upsimage.cgi
+%%CGI%%%%ETCDIR%%/cgi/upsstats.cgi
+%%CGI%%@dirrm %%ETCDIR%%/cgi
+@dirrmtry %%ETCDIR%%