1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-25 04:43:33 +00:00

- fixed Makefile to depend on gcc42 not gfortran

- regenerated configure to use gcc42 gfortran42 with py-numpy
- fixed botch with missing gmtime_r_ (already fixed upstream)
- fixed wsjt to use py-numpy instead of deprecated py-numeric
- fixed to use portaudio v19 already in ports
- fixed to run on amd due to above
- maho wants WANT_FORTRAN knob in gfortran ports

Pointy hat to: pav,maho
Approved by: ehaupt (mentor)
This commit is contained in:
Diane Bruce 2007-02-25 02:37:44 +00:00
parent 5676d104b1
commit bc31aba5af
Notes: svn2git 2021-03-31 03:12:20 +00:00
svn path=/head/; revision=185840
11 changed files with 229 additions and 985 deletions

View File

@ -7,7 +7,7 @@
PORTNAME= wsjt
PORTVERSION= 5.9.6
PORTREVISION= 1
PORTREVISION= 2
CATEGORIES= comms hamradio
MASTER_SITES= ${MASTER_SITE_BERLIOS}
MASTER_SITE_SUBDIR= wsjt
@ -17,30 +17,27 @@ EXTRACT_SUFX= .tgz
MAINTAINER= db@FreeBSD.org
COMMENT= Weak signal ham radio communication pakage
BUILD_DEPENDS= gfortran41:${PORTSDIR}/lang/gfortran \
${PYTHON_SITELIBDIR}/scipy:${PORTSDIR}/science/py-scipy03 \
${PYTHON_SITELIBDIR}/f2py2e:${PORTSDIR}/lang/f2py
# ${PYTHON_SITELIBDIR}/_tkinter.so:${PORTSIDR}/x11-toolkits/py-tkinter
BUILD_DEPENDS= gfortran42:${PORTSDIR}/lang/gcc42 \
${PYTHON_SITELIBDIR}/scipy:${PORTSDIR}/science/py-scipy \
${LOCALBASE}/lib/portaudio2/libportaudio.so:${PORTSDIR}/audio/portaudio2 \
${PYNUMPY}
RUN_DEPENDS= ${PYTHON_SITELIBDIR}/_tkinter.so:${PORTSDIR}/x11-toolkits/py-tkinter/ \
${PYTHON_SITELIBDIR}/PIL.pth:${PORTSDIR}/graphics/py-imaging
LIB_DEPENDS= samplerate:${PORTSDIR}/audio/libsamplerate
ONLY_FOR_ARCHS= i386
ONLY_FOR_ARCHS_REASON= WIP for amd64 and perhaps others
WANT_FORTRAN= yes #dummy
GNU_CONFIGURE= yes
USE_GMAKE= yes
USE_PYTHON= 2.4+
PYNUMERIC= yes
USE_AUTOTOOLS= libtool:15
#
# This until Joe renames the tarball properly --db
#
post-extract:
@${MV} ${WRKDIR}/wsjt596r309 ${WRKDIR}/wsjt-5.9.6.r309
pre-configure:
@${CP} ${FILESDIR}/portaudio-v19-Makefile ${WRKSRC}/portaudio-v19/Makefile
@${CP} ${FILESDIR}/portaudio-v19-config.status ${WRKSRC}/portaudio-v19/config.status
post-patch:
${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
-e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${WRKSRC}/configure
do-install:
@${MKDIR} ${DATADIR}

View File

@ -1,10 +0,0 @@
--- Makefile.in.orig Thu Nov 2 10:15:28 2006
+++ Makefile.in Thu Nov 2 10:15:41 2006
@@ -100,7 +100,6 @@
$(FC) -o JT65code $(OBJS1)
portaudio-v19/lib/.libs/libportaudio.a:
- (cd portaudio-v19;./configure --with-jack=no)
(cd portaudio-v19;${MAKE})
wsjt6: @NEEDPORTAUDIO@ Audio.so #wsjt.spec

View File

@ -0,0 +1,142 @@
--- configure.orig Sat Oct 21 14:19:10 2006
+++ configure Tue Feb 20 08:26:44 2007
@@ -1,8 +1,8 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for wsjt 5.9.2.
+# Generated by GNU Autoconf 2.59 for wsjt 5.9.5.
#
-# $Id: configure.ac 259 2006-08-10 22:22:33Z va3db $
+# $Id: configure.ac 270 2006-09-04 19:18:34Z k1jt $
#
# Copyright (C) 2003 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
@@ -253,7 +253,7 @@
#
# Initializations.
#
-ac_default_prefix=/usr/local
+ac_default_prefix=%%PREFIX%%
ac_config_libobj_dir=.
cross_compiling=no
subdirs=
@@ -269,11 +269,11 @@
# Identity of this package.
PACKAGE_NAME='wsjt'
PACKAGE_TARNAME='wsjt'
-PACKAGE_VERSION='5.9.2'
-PACKAGE_STRING='wsjt 5.9.2'
+PACKAGE_VERSION='5.9.5'
+PACKAGE_STRING='wsjt 5.9.5'
PACKAGE_BUGREPORT=''
-ac_default_prefix=/usr/local/
+ac_default_prefix=%%PREFIX%%/
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
@@ -788,7 +788,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures wsjt 5.9.2 to adapt to many kinds of systems.
+\`configure' configures wsjt 5.9.5 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -845,7 +845,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of wsjt 5.9.2:";;
+ short | recursive ) echo "Configuration of wsjt 5.9.5:";;
esac
cat <<\_ACEOF
@@ -969,14 +969,14 @@
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-wsjt configure 5.9.2
+wsjt configure 5.9.5
generated by GNU Autoconf 2.59
Copyright (C) 2003 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
-$Id: configure.ac 259 2006-08-10 22:22:33Z va3db $
+$Id: configure.ac 270 2006-09-04 19:18:34Z k1jt $
_ACEOF
exit 0
fi
@@ -985,7 +985,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by wsjt $as_me 5.9.2, which was
+It was created by wsjt $as_me 5.9.5, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ $0 $@
@@ -2500,8 +2500,8 @@
CFLAGS="$OLD_CFLAGS"
-CPPFLAGS="-Iportaudio-v19/include -I/usr/local/include -I/usr/include/alsa -I/usr/local/include/alsa ${CPPFLAGS}"
-LDFLAGS="-L/usr/local/lib ${LDFLAGS}"
+CPPFLAGS="-I%%LOCALBASE%%/include/portaudio2 -I%%LOCALBASE%%/include -I/usr/include/alsa -I%%LOCALBASE%%/include/alsa ${CPPFLAGS}"
+LDFLAGS="-L%%LOCALBASE%%/lib/portaudio2 -L%%LOCALBASE%%/lib ${LDFLAGS}"
LIBS=" -lpthread ${LIBS}"
echo "$as_me:$LINENO: checking uname -s for Cygwin, Solaris or HPUX" >&5
@@ -3657,8 +3657,8 @@
echo "${ECHO_T}no" >&6
fi
-# Extract the first word of "gfortran41", so it can be a program name with args.
-set dummy gfortran41; ac_word=$2
+# Extract the first word of "gfortran42", so it can be a program name with args.
+set dummy gfortran42; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_GFORTRAN+set}" = set; then
@@ -4615,7 +4615,7 @@
fi
-if test -e "portaudio-v19/include/portaudio.h" ; then
+if test -e "%%LOCALBASE%%/include/portaudio2/portaudio.h" ; then
echo "Checking for portaudio...yes"
HAS_PORTAUDIO_H=1
else
@@ -6882,9 +6882,9 @@
AUDIO="a2d.f90 jtaudio.c resample.c start_portaudio.c"
- NEEDPORTAUDIO="portaudio-v19/lib/.libs/libportaudio.a"
+ NEEDPORTAUDIO=""
- LIBS="${LIBS} ${RTLIBS} -lsamplerate ./portaudio-v19/lib/.libs/libportaudio.a"
+ LIBS="${LIBS} ${RTLIBS} -lsamplerate -lportaudio"
LIBS="${LIBS} ${ASOUNDLIBS}"
else
NEEDPORTAUDIO=""
@@ -7364,7 +7364,7 @@
} >&5
cat >&5 <<_CSEOF
-This file was extended by wsjt $as_me 5.9.2, which was
+This file was extended by wsjt $as_me 5.9.5, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -7419,7 +7419,7 @@
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-wsjt config.status 5.9.2
+wsjt config.status 5.9.5
configured by $0, generated by GNU Autoconf 2.59,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"

View File

@ -0,0 +1,15 @@
--- cutil.c.orig Mon Dec 11 10:38:11 2006
+++ cutil.c Mon Dec 11 10:38:36 2006
@@ -67,7 +67,11 @@
printf("\n\n");
exit(*n);
}
-
+struct tm *
+gmtime_r_(const time_t *clock, struct tm *result)
+{
+ gmtime_r(clock, result);
+}
time_t time_(void)
{
return time(0);

View File

@ -0,0 +1,19 @@
--- get_fname.F90.orig Mon Dec 11 10:38:21 2006
+++ get_fname.F90 Mon Dec 11 10:38:42 2006
@@ -5,6 +5,7 @@
use dfport
#endif
+ external gmtime_r
character hiscall*12,fname*24,tag*7
integer ntime
integer trperiod
@@ -13,7 +14,7 @@
n1=ntime
n2=(n1+2)/trperiod
n3=n2*trperiod
- call gmtime(n3,it)
+ call gmtime_r(n3,it)
it(5)=it(5)+1
it(6)=mod(it(6),100)
write(fname,1000) (it(j),j=6,1,-1)

View File

@ -0,0 +1,9 @@
--- jtaudio.c.orig Mon Feb 19 23:12:22 2007
+++ jtaudio.c Mon Feb 19 23:13:03 2007
@@ -1,5 +1,5 @@
#include <stdio.h>
-#include <portaudio.h>
+#include <portaudio2/portaudio.h>
#include <string.h>
void fivehz_();

View File

@ -0,0 +1,10 @@
--- padevsub.c.orig Mon Feb 19 23:15:39 2007
+++ padevsub.c Mon Feb 19 23:15:50 2007
@@ -1,6 +1,6 @@
// #include <stdio.h>
// #include <math.h>
-#include "portaudio.h"
+#include <portaudio2/portaudio.h>
int __stdcall PADEVSUB(int *numdev, int *ndefin, int *ndefout,
int nchin[], int nchout[])

View File

@ -0,0 +1,11 @@
--- specjt.py.orig Fri Feb 2 16:45:39 2007
+++ specjt.py Fri Feb 2 17:10:25 2007
@@ -10,7 +10,7 @@
import string
import cPickle
#import Numeric
-from Numeric import zeros, multiarray
+from numpy.oldnumeric import zeros, multiarray
import Image, ImageTk, ImageDraw
from palettes import colormapblue, colormapgray0, colormapHot, \
colormapAFMHot, colormapgray1, colormapLinrad, Colormap2Palette

View File

@ -0,0 +1,11 @@
--- wsjt.py.orig Fri Feb 2 16:45:49 2007
+++ wsjt.py Fri Feb 2 17:10:03 2007
@@ -8,7 +8,7 @@
import g,os,time
import Audio
from math import log10
-from Numeric import zeros
+from numpy.oldnumeric import zeros
import dircache
import Image,ImageTk #, ImageDraw
from palettes import colormapblue, colormapgray0, colormapHot, \

View File

@ -1,197 +0,0 @@
#
# PortAudio V19 Makefile.in
#
# Dominic Mazzoni
# Modifications by Mikael Magnusson
#
top_srcdir = .
srcdir = .
VPATH =
top_builddir = .
PREFIX = /usr/local
prefix = $(PREFIX)
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
libdir = ${exec_prefix}/lib
includedir = ${prefix}/include
CC = gcc
CFLAGS = -g -O2 -DPA_LITTLE_ENDIAN -pthread -I$(top_srcdir)/include -I$(top_srcdir)/src/common -I$(top_srcdir)/src/os/unix -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_CLOCK_GETTIME=1 -DHAVE_NANOSLEEP=1 -DPA_USE_OSS=1
LIBS = -lm -lpthread
AR = /usr/bin/ar
RANLIB = ranlib
LIBTOOL = libtool
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
SHARED_FLAGS = -shared -fPIC
LDFLAGS =
DLL_LIBS = -lm -lpthread
CXXFLAGS = -g -O2
NASM =
NASMOPT =
LN_S = ln -s
LT_RELEASE=@LT_RELEASE@
LT_CURRENT=2
LT_REVISION=0
LT_AGE=0
OTHER_OBJS = src/hostapi/oss/pa_unix_oss.o src/os/unix/pa_unix_hostapis.o src/os/unix/pa_unix_util.o
PALIB = libportaudio.la
PAINC = include/portaudio.h
PA_LDFLAGS = $(LDFLAGS) $(SHARED_FLAGS) -rpath $(libdir) -no-undefined -export-symbols-regex "Pa_.*" -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
#MAKEFILE = Makefile
COMMON_OBJS = \
src/common/pa_allocation.o \
src/common/pa_converters.o \
src/common/pa_cpuload.o \
src/common/pa_dither.o \
src/common/pa_front.o \
src/common/pa_process.o \
src/common/pa_skeleton.o \
src/common/pa_stream.o \
src/common/pa_trace.o
TESTS = \
bin/paqa_devs \
bin/paqa_errs \
bin/patest1 \
bin/patest_buffer \
bin/patest_callbackstop \
bin/patest_clip \
bin/patest_dither \
bin/patest_hang \
bin/patest_in_overflow \
bin/patest_latency \
bin/patest_leftright \
bin/patest_longsine \
bin/patest_many \
bin/patest_maxsines \
bin/patest_multi_sine \
bin/patest_out_underflow \
bin/patest_pink \
bin/patest_prime \
bin/patest_read_record \
bin/patest_read_write_wire \
bin/patest_record \
bin/patest_ringmix \
bin/patest_saw \
bin/patest_sine8 \
bin/patest_sine \
bin/patest_sine_formats \
bin/patest_sine_time \
bin/patest_start_stop \
bin/patest_stop \
bin/patest_toomanysines \
bin/patest_underflow \
bin/patest_wire \
bin/patest_write_sine \
bin/pa_devs \
bin/pa_fuzz \
bin/pa_minlat
# Most of these don't compile yet. Put them in TESTS, above, if
# you want to try to compile them...
ALL_TESTS = \
$(TESTS) \
bin/patest_sync \
bin/debug_convert \
bin/debug_dither_calc \
bin/debug_dual \
bin/debug_multi_in \
bin/debug_multi_out \
bin/debug_record \
bin/debug_record_reuse \
bin/debug_sine_amp \
bin/debug_sine \
bin/debug_sine_formats \
bin/debug_srate \
bin/debug_test1
OBJS = $(COMMON_OBJS) $(OTHER_OBJS)
LTOBJS:= $(OBJS:.o=.lo)
SUBDIRS =
#SUBDIRS += bindings/cpp
all: lib/$(PALIB) all-recursive tests
tests: bin-stamp $(TESTS)
lib/$(PALIB): lib-stamp $(LTOBJS) $(MAKEFILE) $(PAINC)
$(LIBTOOL) --mode=link $(CC) $(PA_LDFLAGS) -o lib/$(PALIB) $(LTOBJS) $(DLL_LIBS)
$(ALL_TESTS): bin/%: lib/$(PALIB) $(MAKEFILE) $(PAINC) test/%.c
$(LIBTOOL) --mode=link $(CC) -o $@ $(CFLAGS) $(top_srcdir)/test/$*.c lib/$(PALIB) $(LIBS)
install: lib/$(PALIB) portaudio-2.0.pc
$(INSTALL) -d $(DESTDIR)$(libdir)
$(LIBTOOL) --mode=install $(INSTALL) lib/$(PALIB) $(DESTDIR)$(libdir)
$(INSTALL) -d $(DESTDIR)$(includedir)
$(INSTALL_DATA) -m 644 $(top_srcdir)/$(PAINC) $(DESTDIR)$(includedir)/portaudio.h
$(INSTALL) -d $(DESTDIR)$(libdir)/pkgconfig
$(INSTALL) -m 644 portaudio-2.0.pc $(DESTDIR)$(libdir)/pkgconfig/portaudio-2.0.pc
@echo ""
@echo "------------------------------------------------------------"
@echo "PortAudio was successfully installed."
@echo ""
@echo "On some systems (e.g. Linux) you should run 'ldconfig' now"
@echo "to make the shared object available. You may also need to"
@echo "modify your LD_LIBRARY_PATH environment variable to include"
@echo "the directory $(libdir)"
@echo "------------------------------------------------------------"
@echo ""
$(MAKE) install-recursive
uninstall:
$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$(PALIB)
$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(includedir)/portaudio.h
$(MAKE) uninstall-recursive
clean:
rm -f $(LTOBJS) $(ALL_TESTS) lib/$(PALIB)
rm -f bin-stamp lib-stamp
-rm -rf bin lib
distclean: clean
rm -f config.log config.status Makefile portaudio-2.0.pc
%.o: %.c $(MAKEFILE) $(PAINC)
$(CC) -c $(CFLAGS) $< -o $@
%.lo: %.c $(MAKEFILE) $(PAINC)
$(LIBTOOL) --mode=compile $(CC) -c $(CFLAGS) $< -o $@
%.o: %.cpp $(MAKEFILE) $(PAINC)
$(CXX) -c $(CXXFLAGS) $< -o $@
%.o: %.asm
$(NASM) $(NASMOPT) -o $@ $<
bin-stamp:
-mkdir bin
touch $@
lib-stamp:
-mkdir lib
-mkdir -p src/os/win src/os/unix src/os/mac_osx src/common \
src/hostapi/oss src/hostapi/alsa src/hostapi/jack src/hostapi/asihpi \
src/hostapi/wmme src/hostapi/wdmks src/hostapi/dsound src/hostapi/wasapi
touch $@
Makefile: Makefile.in config.status
$(SHELL) config.status
all-recursive:
for dir in $(SUBDIRS); do make -C $$dir all; done
install-recursive:
for dir in $(SUBDIRS); do make -C $$dir install; done
uninstall-recursive:
for dir in $(SUBDIRS); do make -C $$dir uninstall; done

View File

@ -1,763 +0,0 @@
#! /usr/local/bin/bash
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=${CONFIG_SHELL-/usr/local/bin/bash}
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
# Work around bugs in pre-3.0 UWIN ksh.
$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
for as_var in \
LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
LC_TELEPHONE LC_TIME
do
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
$as_unset $as_var
fi
done
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
# Name of the executable.
as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
. : '\(.\)' 2>/dev/null ||
echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
/^X\/\(\/\/\)$/{ s//\1/; q; }
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
as_lineno_1=$LINENO
as_lineno_2=$LINENO
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x$as_lineno_3" = "x$as_lineno_2" || {
# Find who we are. Look in the path if we contain no path at all
# relative or not.
case $0 in
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
{ { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
{ (exit 1); exit 1; }; }
fi
case $CONFIG_SHELL in
'')
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for as_base in sh bash ksh sh5; do
case $as_dir in
/*)
if ("$as_dir/$as_base" -c '
as_lineno_1=$LINENO
as_lineno_2=$LINENO
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
$as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
$as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
CONFIG_SHELL=$as_dir/$as_base
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$0" ${1+"$@"}
fi;;
esac
done
done
;;
esac
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line before each line; the second 'sed' does the real
# work. The second script uses 'N' to pair each line-number line
# with the numbered line, and appends trailing '-' during
# substitution so that $LINENO is not a special case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
sed '=' <$as_myself |
sed '
N
s,$,-,
: loop
s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
t loop
s,-$,,
s,^['$as_cr_digits']*\n,,
' >$as_me.lineno &&
chmod +x $as_me.lineno ||
{ { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensible to this).
. ./$as_me.lineno
# Exit status is that of the last command.
exit
}
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
*c*,-n*) ECHO_N= ECHO_C='
' ECHO_T=' ' ;;
*c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
*) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
# We could just check for DJGPP; but this test a) works b) is more generic
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
if test -f conf$$.exe; then
# Don't use ln at all; we don't have any links
as_ln_s='cp -p'
else
as_ln_s='ln -s'
fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" $as_nl"
# CDPATH.
$as_unset CDPATH
exec 6>&1
# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling. Logging --version etc. is OK.
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
} >&5
cat >&5 <<_CSEOF
This file was extended by $as_me, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
_CSEOF
echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
echo >&5
config_files=" Makefile portaudio-2.0.pc"
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
-V, --version print version number, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
Configuration files:
$config_files
Report bugs to <bug-autoconf@gnu.org>."
ac_cs_version="\
config.status
configured by ./configure, generated by GNU Autoconf 2.59,
with options \"'--with-jack=no'\"
Copyright (C) 2003 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=.
INSTALL="/usr/bin/install -c"
# If no file are specified by the user, then we need to provide default
# value. By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=*)
ac_option=`expr "x$1" : 'x\([^=]*\)='`
ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
ac_shift=:
;;
-*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
*) # This is not an option, so the user has probably given explicit
# arguments.
ac_option=$1
ac_need_defaults=false;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --vers* | -V )
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
# Conflict between --help and --header
{ { echo "$as_me:$LINENO: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; };;
--help | --hel | -h )
echo "$ac_cs_usage"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
ac_need_defaults=false;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; } ;;
*) ac_config_targets="$ac_config_targets $1" ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
if $ac_cs_recheck; then
echo "running /usr/local/bin/bash ./configure " '--with-jack=no' $ac_configure_extra_args " --no-create --no-recursion" >&6
exec /usr/local/bin/bash ./configure '--with-jack=no' $ac_configure_extra_args --no-create --no-recursion
fi
for ac_config_target in $ac_config_targets
do
case "$ac_config_target" in
# Handling of arguments.
"Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"portaudio-2.0.pc" ) CONFIG_FILES="$CONFIG_FILES portaudio-2.0.pc" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason to put it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
tmp=./confstat$$-$RANDOM
(umask 077 && mkdir $tmp)
} ||
{
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
#
# CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then
# Protect against being on the right side of a sed subst in config.status.
sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
s,@SHELL@,/usr/local/bin/bash,;t t
s,@PATH_SEPARATOR@,:,;t t
s,@PACKAGE_NAME@,,;t t
s,@PACKAGE_TARNAME@,,;t t
s,@PACKAGE_VERSION@,,;t t
s,@PACKAGE_STRING@,,;t t
s,@PACKAGE_BUGREPORT@,,;t t
s,@exec_prefix@,${prefix},;t t
s,@prefix@,/usr/local,;t t
s,@program_transform_name@,s,x,x,,;t t
s,@bindir@,${exec_prefix}/bin,;t t
s,@sbindir@,${exec_prefix}/sbin,;t t
s,@libexecdir@,${exec_prefix}/libexec,;t t
s,@datadir@,${prefix}/share,;t t
s,@sysconfdir@,${prefix}/etc,;t t
s,@sharedstatedir@,${prefix}/com,;t t
s,@localstatedir@,${prefix}/var,;t t
s,@libdir@,${exec_prefix}/lib,;t t
s,@includedir@,${prefix}/include,;t t
s,@oldincludedir@,/usr/include,;t t
s,@infodir@,${prefix}/info,;t t
s,@mandir@,${prefix}/man,;t t
s,@build_alias@,,;t t
s,@host_alias@,,;t t
s,@target_alias@,,;t t
s,@DEFS@,-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_CLOCK_GETTIME=1 -DHAVE_NANOSLEEP=1 -DPA_USE_OSS=1 ,;t t
s,@ECHO_C@,,;t t
s,@ECHO_N@,-n,;t t
s,@ECHO_T@,,;t t
s,@LIBS@, -lm -lpthread,;t t
s,@CC@,gcc,;t t
s,@CFLAGS@,-g -O2 -DPA_LITTLE_ENDIAN -pthread,;t t
s,@LDFLAGS@,,;t t
s,@CPPFLAGS@,,;t t
s,@ac_ct_CC@,gcc,;t t
s,@EXEEXT@,,;t t
s,@OBJEXT@,o,;t t
s,@build@,i386-unknown-freebsd6.2,;t t
s,@build_cpu@,i386,;t t
s,@build_vendor@,unknown,;t t
s,@build_os@,freebsd6.2,;t t
s,@host@,i386-unknown-freebsd6.2,;t t
s,@host_cpu@,i386,;t t
s,@host_vendor@,unknown,;t t
s,@host_os@,freebsd6.2,;t t
s,@EGREP@,grep -E,;t t
s,@LN_S@,ln -s,;t t
s,@ECHO@,echo,;t t
s,@AR@,/usr/bin/ar,;t t
s,@ac_ct_AR@,ar,;t t
s,@RANLIB@,ranlib,;t t
s,@ac_ct_RANLIB@,ranlib,;t t
s,@STRIP@,strip,;t t
s,@ac_ct_STRIP@,strip,;t t
s,@DLLTOOL@,dlltool,;t t
s,@ac_ct_DLLTOOL@,,;t t
s,@AS@,as,;t t
s,@ac_ct_AS@,,;t t
s,@OBJDUMP@,objdump,;t t
s,@ac_ct_OBJDUMP@,,;t t
s,@CPP@,gcc -E,;t t
s,@CXX@,g++,;t t
s,@CXXFLAGS@,-g -O2,;t t
s,@ac_ct_CXX@,g++,;t t
s,@CXXCPP@,g++ -E,;t t
s,@F77@,f77,;t t
s,@FFLAGS@,-g -O2,;t t
s,@ac_ct_F77@,f77,;t t
s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool,;t t
s,@INSTALL_PROGRAM@,${INSTALL},;t t
s,@INSTALL_SCRIPT@,${INSTALL},;t t
s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
s,@PKG_CONFIG@,/usr/local/bin/pkg-config,;t t
s,@ac_pt_PKG_CONFIG@,/usr/local/bin/pkg-config,;t t
s,@JACK_CFLAGS@,-I/usr/local/include ,;t t
s,@JACK_LIBS@,-pthread -L/usr/local/lib -ljack ,;t t
s,@LT_CURRENT@,2,;t t
s,@LT_REVISION@,0,;t t
s,@LT_AGE@,0,;t t
s,@OTHER_OBJS@, src/hostapi/oss/pa_unix_oss.o src/os/unix/pa_unix_hostapis.o src/os/unix/pa_unix_util.o,;t t
s,@PADLL@,libportaudio.so,;t t
s,@SHARED_FLAGS@,-shared -fPIC,;t t
s,@THREAD_CFLAGS@,-pthread,;t t
s,@DLL_LIBS@, -lm -lpthread,;t t
s,@NASM@,,;t t
s,@NASMOPT@,,;t t
s,@subdirs@,,;t t
s,@ENABLE_CXX_TRUE@,#,;t t
s,@ENABLE_CXX_FALSE@,,;t t
s,@LIBOBJS@,,;t t
s,@LTLIBOBJS@,,;t t
CEOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_lines=48
ac_sed_frag=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_lines # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
else
sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
fi
if test ! -s $tmp/subs.frag; then
ac_more_lines=false
else
# The purpose of the label and of the branching condition is to
# speed up the sed processing (if there are no `@' at all, there
# is no need to browse any of the substitutions).
# These are the two extra sed commands mentioned above.
(echo ':t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
else
ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
fi
ac_sed_frag=`expr $ac_sed_frag + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_lines`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
fi # test -n "$CONFIG_FILES"
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
cat >$tmp/stdin
ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
# Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
if test x"$ac_file" != x-; then
{ echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
rm -f "$ac_file"
fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
if test x"$ac_file" = x-; then
configure_input=
else
configure_input="$ac_file. "
fi
configure_input=$configure_input"Generated from `echo $ac_file_in |
sed 's,.*/,,'` by configure."
# First look for the input files in the build tree, otherwise in the
# src tree.
ac_file_inputs=`IFS=:
for f in $ac_file_in; do
case $f in
-) echo $tmp/stdin ;;
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
echo "$f";;
*) # Relative
if test -f "$f"; then
# Build tree
echo "$f"
elif test -f "$srcdir/$f"; then
# Source tree
echo "$srcdir/$f"
else
# /dev/null tree
{ { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
fi;;
esac
done` || { (exit 1); exit 1; }
sed "/^[ ]*VPATH[ ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[ ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[ ]*$//;
}
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
rm -f $tmp/stdin
if test x"$ac_file" != x-; then
mv $tmp/out $ac_file
else
cat $tmp/out
rm -f $tmp/out
fi
done
{ (exit 0); exit 0; }