Add support for mpd5.

svn path=/head/; revision=222546

net/mpd-l2tp-ipv6pd-client/Makefile

@@ -6,7 +6,7 @@
 #
 
 PORTNAME=	mpd-l2tp-ipv6pd-client
-PORTVERSION=	20080101
+PORTVERSION=	20081105
 #PORTREVISION=	0
 CATEGORIES=	net ipv6
 MASTER_SITES=	# none
@@ -15,16 +15,33 @@ DISTFILES=	# none
 MAINTAINER=	ume@FreeBSD.org
 COMMENT=	A sample implementaiton set of "L2TP-IPv6PD" client using mpd
 
-BUILD_DEPENDS=	${MPD_NAME}:${PORTSDIR}/net/${MPD_NAME}
-RUN_DEPENDS=	dhcp6ctl:${PORTSDIR}/net/dhcp6 \
-		${MPD_NAME}:${PORTSDIR}/net/${MPD_NAME}
-
 MANUAL_PACKAGE_BUILD=yes
 NO_PACKAGE=	yes
 USE_RC_SUBR=	yes
 
+OPTIONS=	MPD4		"Use mpd4"			on \
+		MPD5		"Use mpd5"			off
+
+.include <bsd.port.pre.mk>
+
+.if defined(WITH_MPD5) && defined(WITH_MPD4)
+BROKEN=		Multiple mpd versions selected.  Run 'make config' again!
+.endif
+
+.if defined(WITH_MPD4)
+MPD_NAME=	mpd4
+MPD4=		""
+.else
+MPD_NAME=	mpd5
+MPD4=		"@comment "
+.endif
+
+BUILD_DEPENDS=	${MPD_NAME}:${PORTSDIR}/net/${MPD_NAME}
+RUN_DEPENDS=	dhcp6ctl:${PORTSDIR}/net/dhcp6 \
+		${MPD_NAME}:${PORTSDIR}/net/${MPD_NAME}
+
 CONF_DIR?=	etc/${MPD_NAME}
-CONF_FILES=	dhcp6c.conf.in mpd.conf mpd.links rtadvd.conf
+CONF_FILES=	dhcp6c.conf.in rtadvd.conf
 SCRIPT_FILES=	dhcp6c_pd.sh linkdown.sh linkup.sh
 SECRET_FILES=	mpd.secret
 
@@ -43,19 +60,12 @@ SCRIPTS_ENV=	WRKDIR="${WRKDIR}" \
 		SED="${SED}" \
 		WHICH="${WHICH}"
 
-PLIST_SUB=	CONF_DIR="${CONF_DIR}" \
-		MPD_NAME="${MPD_NAME}"
+PLIST_SUB=	CONF_DIR=${CONF_DIR} \
+		MPD_NAME=${MPD_NAME} \
+		MPD4=${MPD4}
 
 PKGMESSAGE=	${WRKDIR}/pkg-message
 
-.if defined(WITH_MPD5)
-MPD_NAME=	mpd5
-.else
-MPD_NAME=	mpd4
-.endif
-
-.include <bsd.port.pre.mk>
-
 .if ${OSVERSION} < 602106 || (${OSVERSION} >= 700000 && ${OSVERSION} < 700031)
 IGNORE=		does not work with old ng_ksocket
 .endif
@@ -76,6 +86,12 @@ do-install:
 		exit 1; \
 	fi
 	@${MKDIR} ${PREFIX}/${CONF_DIR}
+.if defined(WITH_MPD4)
+	@${INSTALL_DATA} ${WRKDIR}/mpd.conf ${PREFIX}/${CONF_DIR}/mpd.conf
+	@${INSTALL_DATA} ${WRKDIR}/mpd.links ${PREFIX}/${CONF_DIR}/mpd.links
+.else
+	@${INSTALL_DATA} ${WRKDIR}/mpd5.conf ${PREFIX}/${CONF_DIR}/mpd.conf
+.endif
 .for f in ${CONF_FILES}
 	@${INSTALL_DATA} ${WRKDIR}/${f} ${PREFIX}/${CONF_DIR}/${f}
 .endfor

net/mpd-l2tp-ipv6pd-client/pkg-plist

@@ -3,7 +3,7 @@
 %%CONF_DIR%%/linkdown.sh
 %%CONF_DIR%%/linkup.sh
 %%CONF_DIR%%/mpd.conf
-%%CONF_DIR%%/mpd.links
+%%MPD4%%%%CONF_DIR%%/mpd.links
 %%CONF_DIR%%/mpd.secret
 %%CONF_DIR%%/%%MPD_NAME%%
 %%CONF_DIR%%/rtadvd.conf

net/mpd-l2tp-ipv6pd-client/scripts/dhcp6c_pd.sh.in

@@ -77,7 +77,7 @@ dhcp6c_pd_prestart()
 	# create dhcp6c.conf
 	${SED} -e "s/__INTERFACE__/${dhcp6c_pd_interface}/" \
 	       -e "s/__PD_INTERFACE__/${dhcp6c_pd_rtadvd_interface}/" \
-	    < ${dhcp6c_pd_conf}.in > ${dhcp6c_pd_conf}.${dhcp6c_pd_interface}
+	    < ${dhcp6c_pd_conf_in} > ${dhcp6c_pd_conf}.${dhcp6c_pd_interface}
 
 	# create dhcp6cctlkey
 	#if [ ! -f ${prefix}/etc/dhcp6cctlkey ]; then
@@ -115,16 +115,16 @@ dhcp6c_pd_stop()
 }
 
 load_rc_config ${name}
-dhcp6c_pd_conf=${dhcp6c_pd_conf:-"${prefix}/%%CONF_DIR%%/dhcp6c.conf"}
+dhcp6c_pd_conf_in=${dhcp6c_pd_conf_in:-"${prefix}/%%CONF_DIR%%/dhcp6c.conf.in"}
+dhcp6c_pd_conf=${dhcp6c_pd_conf:-"/var/run/dhcp6c.conf"}
 dhcp6c_pd_interface=${2:-${dhcp6c_pd_interface}}
 dhcp6c_pd_localaddr=${3:-${dhcp6c_pd_localaddr}}
 dhcp6c_pd_rtadvd_enable=${dhcp6c_pd_rtadvd_enable:-"NO"}
 dhcp6c_pd_rtadvd_interface=${dhcp6c_pd_rtadvd_interface:-"%%PD_INTERFACE%%"}
 dhcp6c_pd_rtadvd_conf=${dhcp6c_pd_rtadvd_conf:-"${prefix}/%%CONF_DIR%%/rtadvd.conf"}
-required_files="${dhcp6c_pd_conf}.in"
+required_files="${dhcp6c_pd_conf_in}"
 pidfile=/var/run/dhcp6c-${dhcp6c_pd_interface}.pid
-dhcp6c_pd_flags="-p ${pidfile} ${dhcp6c_pd_flags}"
-command_args="-c ${dhcp6c_pd_conf}.${dhcp6c_pd_interface} ${dhcp6c_pd_interface}"
+command_args="-p ${pidfile} -c ${dhcp6c_pd_conf}.${dhcp6c_pd_interface} ${dhcp6c_pd_interface}"
 if [ -n "${dhcp6c_pd_localaddr}" ]; then
 	command_args="-A ${dhcp6c_pd_localaddr} ${command_args}"
 fi

net/mpd-l2tp-ipv6pd-client/scripts/mpd.in

@@ -1,5 +1,5 @@
 mpd_confdir="%%PREFIX%%/%%CONF_DIR%%"
-mpd_interfaces="%%INTERFACE%%"
+mpd_rundir="/var/run"
 
 mpd_enable="YES"
 mpd_flags="-b -d ${mpd_confdir}"
@@ -8,7 +8,11 @@ stop_precmd="mpd_prestop"
 
 mpd_prestop()
 {
-	for iface in ${mpd_interfaces}; do
+	local ifaces
+
+	ifaces=$(find ${mpd_rundir} -name dhcp6c.conf.\* -print | \
+		sed -e "s|${mpd_rundir}/dhcp6c\.conf\.||")
+	for iface in ${ifaces}; do
 		${mpd_confdir}/dhcp6c_pd.sh stop ${iface}
 	done
 	sleep 2

net/mpd-l2tp-ipv6pd-client/scripts/setting

@@ -63,27 +63,29 @@ case $retval in
 esac
 
 # Set PPP Interface
-tempfile=`${MKTEMP} -t ipv6pd`
-${DIALOG} --title "L2TP-IPv6PD Setup Helper" \
-	  --inputbox "Please Input PPP Interface (default: ng0):" -1 -1 \
-	2> ${tempfile}
-case $retval in
-0)
-	interface=`${CAT} ${tempfile}`
-	if [ -z "${interface}" ]; then
-		interface="ng0"
-	fi
-	${RM} ${tempfile}
-	;;
-1)
-	${RM} ${tempfile}
-	exit
-	;;
-255)
-	${RM} ${tempfile}
-	exit
-	;;
-esac
+if [ "${MPD_NAME}" = "mpd4" ]; then
+	tempfile=`${MKTEMP} -t ipv6pd`
+	${DIALOG} --title "L2TP-IPv6PD Setup Helper" \
+		--inputbox "Please Input PPP Interface (default: ng0):" \
+		-1 -1 2> ${tempfile}
+	case $retval in
+	0)
+		interface=`${CAT} ${tempfile}`
+		if [ -z "${interface}" ]; then
+			interface="ng0"
+		fi
+		${RM} ${tempfile}
+		;;
+	1)
+		${RM} ${tempfile}
+		exit
+		;;
+	    255)
+		${RM} ${tempfile}
+		exit
+		;;
+	esac
+fi
 
 # Set Prefix Delegation Interface
 tempfile=`${MKTEMP} -t ipv6pd`