- Support staging

- EXTRACT_SUFX -> USES=tar:tgz
- Use @sample for sample config and remove note to copy it
  from pkg-message

Approved by:	portmgr (blanket approval)

net/freenet6/Makefile

@@ -7,24 +7,19 @@ PORTREVISION=	1
 CATEGORIES=	net ipv6
 MASTER_SITES=	http://go6.net/4105/file.asp?file_id=166&
 DISTNAME=	tspc-${PORTVERSION}-src
-EXTRACT_SUFX=	.tgz
 
 MAINTAINER=	edwin@mavetju.org
 COMMENT=	Hexago Freenet6 Tunnel Setup Protocol Client - Free IPv6 tunnel
 
-USES=		gmake
+USES=		gmake tar:tgz
 MAKE_ARGS=	target=freebsd CC="${CC}" CXX="${CXX}" \
-		installdir="${PREFIX}" ETCDIR="${ETCDIR}"
+		installdir="${STAGEDIR}${PREFIX}" ETCDIR="${ETCDIR}"
 
 WRKSRC=		${WRKDIR}/gw6c-${DISTVERSION}/tspc-advanced
 
 USE_RC_SUBR=	freenet6
 SUB_FILES=	pkg-message
 
-MAN5=		gw6c.conf.5
-MAN8=		gw6c.8
-
-NO_STAGE=	yes
 MAKE_JOBS_UNSAFE=yes
 
 post-fetch:
@@ -33,9 +28,4 @@ post-fetch:
 			${DISTDIR}/${DISTNAME}${EXTRACT_SUFX}; \
 	fi
 
-post-install:
-	@${ECHO_MSG}
-	@${CAT} ${PKGMESSAGE}
-	@${ECHO_MSG}
-
 .include <bsd.port.mk>

net/freenet6/files/patch-Makefile

@@ -1,20 +1,5 @@
---- template/Makefile.orig	2009-11-15 19:42:51.000000000 +0100
-+++ template/Makefile	2009-11-15 19:43:01.000000000 +0100
-@@ -17,8 +17,10 @@
- 
- install:
- 	@echo "Installing templates ..."
--	@for template_var in README $(PLATFORM).sh; do \
--            cp $${template_var} $(INSTALL_TEMPL)/$${template_var}; \
-+	@for template_var in $(PLATFORM).sh; do \
-+            cp $${template_var} $(INSTALL_BIN)/gw6c-$${template_var}; \
-         done
-+	@mkdir -p $(ETCDIR)
-+	@cp README $(ETCDIR)
- 
- clean: 
---- Makefile.orig	2009-11-15 19:50:40.000000000 +0100
-+++ Makefile	2009-11-15 19:50:57.000000000 +0100
+--- ./Makefile.orig	2009-05-19 12:51:11.000000000 -0400
++++ ./Makefile	2014-06-27 04:03:52.000000000 -0400
 @@ -74,7 +74,7 @@
  #
  .PHONY: all platform-check check-gw6c-pal check-gw6c-config check-gw6c-messaging build-gw6c check-gw6c-install install clean cleanall
@@ -61,13 +46,14 @@
  	    $(MAKE) -C $$dir install || exit 1; \
  	done
  
- 	@cp $(TARGET) $(INSTALL_BIN)
+-	@cp $(TARGET) $(INSTALL_BIN)
 -	@cp $(BIN_DIR)/gw6c.conf.sample $(INSTALL_BIN)
 -	@[ -f $(INSTALL_BIN)/gw6c.conf ] || { \
 -	    cp $(INSTALL_BIN)/gw6c.conf.sample $(INSTALL_BIN)/gw6c.conf; \
 -	}
-+	@mkdir -p $(ETCDIR)
-+	@cp $(BIN_DIR)/gw6c.conf.sample $(ETCDIR)
++	${BSD_INSTALL_PROGRAM} $(TARGET) $(INSTALL_BIN)
++	@mkdir -p $(DESTDIR)$(ETCDIR)
++	${BSD_INSTALL_DATA} $(BIN_DIR)/gw6c.conf.sample $(DESTDIR)$(ETCDIR)
  
  
  # This makefile target will clean the build tree of the Gateway6 Client.

net/freenet6/files/patch-conf__Makefile

@@ -0,0 +1,11 @@
+--- ./conf/Makefile.orig	2009-05-19 12:50:14.000000000 -0400
++++ ./conf/Makefile	2014-06-27 03:51:00.000000000 -0400
+@@ -32,7 +32,7 @@
+ 	     -e "s+@ifname_v6udpv4@+$(PLATFORM_V6UDPV4)+" \
+ 	     -e "s+@ifname_v6v4@+$(PLATFORM_V6V4)+" \
+ 	     -e "s+@conf_template@+$(PLATFORM)+" \
+-	     -e "s+@conf_gw6_dir@+$(INSTALL_DIR)+" \
++	     -e "s+@conf_gw6_dir@+$(PREFIX)+" \
+ 	     gw6c.conf.in > $(BIN_DIR)/gw6c.conf.sample
+ 	@chmod 700 $(BIN_DIR)/gw6c.conf.sample
+ 

net/freenet6/files/patch-template__Makefile

@@ -0,0 +1,15 @@
+--- ./template/Makefile.orig	2008-01-09 10:09:18.000000000 -0500
++++ ./template/Makefile	2014-06-27 03:51:00.000000000 -0400
+@@ -17,8 +17,10 @@
+ 
+ install:
+ 	@echo "Installing templates ..."
+-	@for template_var in README $(PLATFORM).sh; do \
+-            cp $${template_var} $(INSTALL_TEMPL)/$${template_var}; \
++	@for template_var in $(PLATFORM).sh; do \
++            cp $${template_var} $(INSTALL_BIN)/gw6c-$${template_var}; \
+         done
++	@mkdir -p $(DESTDIR)$(ETCDIR)
++	${BSD_INSTALL_DATA} README $(DESTDIR)$(ETCDIR)
+ 
+ clean: 

net/freenet6/files/pkg-message.in

@@ -1,6 +1,5 @@
 Now that the package is installed, please finish it with the following steps:
 
-- Copy %%PREFIX%%/etc/gw6c.conf.example to %%PREFIX%%/etc/gw6c.conf
 - Check the values of %%PREFIX%%/etc/gw6c.conf. If you have registered at
   the website, fill in your userid and password there.
 - Add 'freenet6_enable="YES"' to your /etc/rc.conf to make it start

net/freenet6/pkg-plist

@@ -1,5 +1,7 @@
 bin/gw6c
 bin/gw6c-freebsd.sh
 etc/freenet6/README
-etc/freenet6/gw6c.conf.sample
+@sample etc/freenet6/gw6c.conf.sample
+man/man5/gw6c.conf.5.gz
+man/man8/gw6c.8.gz
 @dirrmtry etc/freenet6