exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
Other major improvements include an updated HAL with better volume
probing code, ufsid integration, and support for volume names containing
spaces (big thanks to J.R. Oldroyd); a new WebKit; updated AbiWord;
an updated Gimp; and a preview of the new GNOME Shell project (thanks to
Pawel Worach).
The FreeBSD GNOME Team would like to that the following additional
contributors to this release whose patches and testing really helped
make it a success:
Andrius Morkunas
Dominique Goncalves
Eric L. Chen
J.R. Oldroyd
Joseph S. Atkinson
Li
Pawel Worach
Romain Tartière
Thomas Vogt
Yasuda Keisuke
Rui Paulo
Martin Wilke
(and an extra shout out to miwi and pav for pointyhat runs)
We would like to send this release out to Alexander Loginov (avl) in
hopes that he feels better soon.
PR: 136676
136967
138872 (obsolete with new epiphany-webkit)
139160
134737
139941
140097
140838
140929
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet
PR: 125857 [1]
126993 [2]
130031 [3]
127399 [4]
127661 [5]
124302 [6]
129570 [7]
129936
123790
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.
This release would not have been possible without the contributions and
testing efforts of the following people:
Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
releases in that it focuses more on stability and functionality than on
new features. Not that it doesn't have its share of new and exciting
items. See http://www.gnome.org/start/2.18/ for all the goodies in
this release.
GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
axe .la garbage.
I didn't pay much attention to the fact how _INC get lost after
repocopy when was told about this problem in
x11-tookits/libpanelappetmm.
Reported by: pointyhat
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
