Mk/Uses/linux.mk.
- Replace USE_LINUX=yes with USES+=linux and USE_LINUX=(.*) with
USES+=linux:\1 in all ports.
- Replace USE_LINUX_APPS with USE_LINUX in all ports.
- Use INSTALL_SCRIPT instead of INSTALL_PROGRAM to install scripts in some
ports.
- When USE_LINUX_RPM is defined, simplify the way DISTFILES and EXTRACT_ONLY
are defined.
- Remove BRANDELF_DIRS and BRANDELF_FILES handling. In the very rare cases
that it is still necessary ports can run ${BRANDELF} from post-patch.
- Remove AUTOMATIC_PLIST handling. Only one port used it.
- Fix Linux MASTER_SITES.
- Replace OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS with
default versions framework.
- bsd.port.mk:
- Move Linux related bits to Uses/linux.mk, except USE_LINUX_PREFIX.
- Put USE_LINUX_PREFIX handling after USES processing.
- Define DOCSDIR, DATADIR, etc. after handling USE_LINUX_PREFIX so it can
give these variables a different default value.
- When a package needs to run Linux ldconfig check before installation if
Linux support is enabled.
- emulators/linux_base-*:
- Use USES=linux and remove duplication.
- Remove files/lp. FreeBSD or CUPS lp(1) should work.
- Remove files/yp.conf. No longer seems to be used.
- Remove pkg-deinstall and move pkg-install into pkg-plist.
- Update pkg-descr and pkg-message.
- Fix handling of ldconfig cache in pkg-plist.
- devel/fb-adb: Use a Linux shell to run a Linux script but patch the script
to use FreeBSD mkdir so mkdir -p $path creates $path and not
/compat/linux/$path.
PR: 211645
Exp-run by: antoine
Approved by: portmgr (antoine)
For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.
Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format
- remove comment about stldport-icc [2]
- give up maintainership, I don't have time for it ATM
! interested parties should get in contact with me, I got some patches
! for icc v9, can provide insight into why some things are done like
! they are and maybe some contacts at Intel are still able to provide
! some help
PR: 105569 [1]
Noticed by: Tsurutani Naoki <turutani@scphys.kyoto-u.ac.jp> [1]
PR: 106707 [2]
Submitted by: vd [2]
This commit should largele be a NOOP as it only adds support
for DESTDIR undefined. This does allow us to start testing
ports with DESTDIR set, but this is as of yet not supported.
Although this has been extensively tested on pointyhat, this
is a very intrusive change and some cases may have been
overlooked. Please contact Gabor and me if you find any.
PR: 100555
Submitted by: gabor
Sponsored by: Google Summer of Code 2006
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.decracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.orgriggs@rrr.deUdo.Schweigert@Siemens.com
- 5.x got the header fix too, don't install replacement headers there [1]
- allow to override GXX_ROOT [2]
Note: you may see "as: Illegal seek" while compiling with icc (a simple test
didn't revealed the same message with icpc). I don't know the reason for it,
but the resulting executable seems to work, so I commit the update.
Thanks to: marius [1]
Requested by: mi [2]
inspection of src/contrib/gnu/crtstuff.c it seems it's the same as
crtbegin.o, so make a symlink for it. At least linking a "Hello World"
program with -static produces a working executable now.
Noticed by: Niklas Sorensson <nik@cs.chalmers.se>
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
- Declare a PATCH_DEPENDS on emulators/linux_base-8 only if actually using
RTPpatch to apply an Intel provided binary patch.
- Turn the GCC-compatibility of ICC on by default for FreeBSD >= 502108;
except for one bug which is worked around by this port and will be fixed
in src later FreeBSD gained support for using the GCC-compatibility along
with the patch to compile the kernel with ICC (but the ICC 8.0 series
wasn't configurable/hackable enough to actually use it on FreeBSD, which
resulted into the aforementioned bug).
- On FreeBSD >= 502108 default to using libstdc++ from the base as STL
instead of STLport unless "-cxxlib-icc" is passed to icpc (made possible
by turning on the GCC-compatibility and the compatibility to GCC 3.3 and
3.4 which was added to ICC 8.1). On FreeBSD < 502108 STLport i.e.
devel/stlport-icc is and will continue to be the only STL available.
Update the instructions displayed by the post-install target accordingly.
- Put the wrappers for glibc specific symbols and other GNU/Linux compat
hacks into their own library "libiccfbsd" and teach the ld-wrapper to
injected this lib instead of adding these things to the Intel libcxa and
libcxaguard. Beginning with ICC 8.1 non of the Intel libs is "guaranteed"
to be linked into resulting executable (this is actually a fix in ICC
as libcxa and libcxaguard are C++ only). This fixes linking against libm
with icc amongst other things [1].
- Clean the ld-wrapper up a bit. Stop trying to create a perfect world for
the real ld(1) regarding superfluous linkage options, ICC natively passes
far to many of them to the linker that we easily could remove them all.
- Change the ld-wrapper to allow for bootstrapping STLport in a bit
different way that we used to do it, required to make devel/stlport-icc
build correctly again.
- Use fmt(1) to print the infos displayed by the post-install target so
the text is formated properly after the included variables are expanded [2].
Todo: - Rework the freaking thread library selection via the PTHREAD_LIBS
environment variable by the ld-wrapper, this causes really annoying
problems when compiling ports with ICC. Some functionality analogous
to the GCC "-pthread" option (which is also known by ICC but is not
documented and doesn't do the right thing for FreeBSD) would be great.
- Make devel/stlport-icc build again with ICC 8.1 after devel/stlport
has been updated to 4.6.2 (PR 73604). Patch for 4.5.3 already done.
Reported by: Dan Nelson <dnelson@allantgroup.com> [1]
Courtesy of: netchild [2]
Approved by: netchild
- For changes since the 8.0 series see the installed C++ReleaseNotes.htm
but note that information given there doesn't necessarily apply to ICC
on FreeBSD, e.g. -cxxlib-gcc isn't the default on FreeBSD yet and this
port also doesn't install the Eclipse and CDT IDEs.
- ICC now unfortunately requires emulators/linux_base-8.
- Works fine for compiling C source.
- A 6.0-current GENERIC kernel compiles and boots.
- The devel/stlport-icc port currently can't link the exception handling
testsuite with this ICC version (due to relying on a missbehaviour of
the old ICC versions) and has to be changed in a way that doesn't break
lang/icc7.
- Support for using the GCC-compatibility of ICC on FreeBSD and using
the GNU libstdc++ as the STL with ICC is in the works.
o Like with the system GCC, default to libpthread for the threads library
on FreeBSD >= 502102.
Approved by: netchild
In joint forces with: netchild
