The dependency was previously pulled indirectly via another dependency, and
that stopped happening at some point. The build was now failing because
libqalculate was not being properly found anymore.
Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]
JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
anymore at run-time.
PR: 185462 [1]
PR: 187548 [2]
PR: 182793 [3]
PR: 181746 [4]
PR: 176047 [5]
PR: 190814 [6]
Submitted by: c.petrik.sosa@gmail.com [1]
Matthieu Volat <mazhe@alkumuna.eu> [2]
free.bsd@webstyle.ch [3]
andrnils@gmail.com [4]
rfg@tristatelogic.com [5]
Michelle Sullivan <michelle@sorbs.net> [6]
Approved by: portmgr (blanket) (for NO_STAGED ports)
Dave Shar <koalative at gmail.com> wishes to maintain these ports
with my help.
audio/portaudio
- Pass maintainership to koalative at gmail.com
audio/portaudio2
- Pass maintainership to koalative at gmail.com
deskutils/parcellite
- Pass maintainership to koalative at gmail.com
devel/allegro
- Change Makefile header, add Created by Jimmy Olgeni <olgeni@FreeBSD.org>
- Pass maintainership to koalative at gmail.com
devel/allegro-devel
- Change Makefile header, use my name and @FreeBSD.org email
- Pass maintainership to koalative at gmail.com
emulators/q4wine
- Remove not needed linie
- Pass maintainership to koalative at gmail.com
emulators/swine
- Change Makefile header, use my name and @FreeBSD.org email
- Pass maintainership to koalative at gmail.com
finance/venice
- Pass maintainership to koalative at gmail.com
graphics/glfw
- Pass maintainership to koalative at gmail.com
graphics/glfw2
- Pass maintainership to koalative at gmail.com
graphics/xsane
- Pass maintainership to koalative at gmail.com
textproc/loook
- Pass maintainership to koalative at gmail.com
Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy. Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.
Approved by: portmgr (implicit)
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream. Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.
Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix. Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS. This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.
PR: 190592
Exp-run by: antoine
Approved by: portmgr (antoine)
- update to 0.17.3
- switch to github
- update dependencies
- convert to using auto-generated packing list
- add stage support
- remove patch, included into this upstream version
Dave Shar <koalative at gmail.com> wishes to maintain these ports
with my help.
deskutils/py-send2trash
- Change Makefile header, use my name and @FreeBSD.org email
- Pass maintainership to koalative at gmail.com
- Change license BSD to BSD3CLAUSE
- Use USE_PYDISTUTILS=yes instead of easy_install
- Remove PYDISTUTILS_PKGNAME and add PYDISTUTILS_AUTOPLIST
graphics/founts
- Change Makefile header, use my name and @FreeBSD.org email
- Pass maintainership to koalative at gmail.com
- Add REINPLACE, fix ELAST
- Change distinfo, remove supplied icon
graphics/py-pyggel
- Pass maintainership to koalative at gmail.com
graphics/radius-engine
- Change Makefile header, use my name and @FreeBSD.org email
- Pass maintainership to koalative at gmail.com
irc/py-fishcrypt
- Pass maintainership to koalative at gmail.com
sysutils/gigolo
- Change Makefile header, use my name and @FreeBSD.org email
- Pass maintainership to koalative at gmail.com
- Use tar:bzip2 instead of USE_BZIP2=yes
- Remove TODO from DOCS
- Remove useless .include <bsd.port.options.mk>
- Change pkg-plist, remove mtree
Both post-extract and post-install targets aren't necessary.
In particular the shifting to get the src to extract into the default
WRKSRC was not only unnecessary, the home-rolled extraction could break
in the future, so just clean the whole thing up. Verified on Redports.
- Update to version 1.5, development moved to github
- Convert to USES=libtool, don't install la file
- Install striped version of library
- Allow to compile with OpenSSL from base
- Update homepage address
- Bump affected deskutils/cairo-dock-plugins
mail/claws-mail:
- Update to version 3.10.0
- Convert to USES=libtool tar:bzip2 [1]
- Don't install static plugin files [1]
- Replace GMAKE with MAKE_CMD [1]
Release notes: http://claws-mail.org/news.php
mail/claws-mail-clamd:
- Don't show pkg-message in post-install, staging takes care of that
Submitted by: tijl via private mail [1]
- Since xosd shlib version has changed, bump all ports which depend on it
- Stagify deskutils/xneur
- Convert USE_BZIP2 to USES
- Use new LIB_DEPENDS syntax
Approved by: portmgr blanket
===> Building package for recoll-1.19.13
pkg-static: lstat(/wrkdirs/usr/ports/deskutils/recoll/work/stage/usr/local/lib/python2.7/site-packages/recoll/__init__.pyc): No such file or directory
pkg-static: lstat(/wrkdirs/usr/ports/deskutils/recoll/work/stage/usr/local/lib/python2.7/site-packages/recoll/rclconfig.pyc): No such file or directory
*** [do-package] Error code 1
Reported by: pkg-fallout
And USES=tar:bzip2 here and there.
deskutils/xfce4-notification-daemon:
- Don't patch Makefile.am.
- Link with -lgmodule-2.0 explicitly now that libgtk-x11-2.0.la does not
imply it.
x11/xfce4-wmdock-plugin:
- Make it fetchable.
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
Changes:
* various: migrate USE_BZIP2 to USES=tar:bzip2
* various: migrate USE_XZ to USES=tar:xz
* multimedia/py-ffmpeg: add and prefer github (GH) as master site
* ports-mgmt/portbuilder: specify license as BSD2CLAUSE (instead of just BSD)
Most ports are updated infrequently so a single batch commit is preferred over
collating changes per port.
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
2014-04-16 ports-mgmt/pkgsearch: Upstream disappeared
2014-04-17 science/flounder: Unmaintained since 2002
2014-04-17 security/nbaudit: Unmaintained since 2002
2014-04-17 security/saint: Unmaintained since 2002
2014-04-17 graphics/gozer: Unmaintained since 2002
2014-04-17 misc/pdfmap: Unmaintained since 2002
2014-04-17 devel/showgrammar: Unmaintained since 2002
2014-04-17 biology/libgenome: Unmaintained since 2002
2014-04-17 deskutils/narval: Unmaintained since 2002
2014-04-17 devel/fampp: Unmaintained since 2002
2014-04-17 net-p2p/py-fngrab: Unmaintained since 2002
2014-04-17 misc/wmfirew: Unmaintained since 2002
2014-04-17 x11-wm/e16utils: Unmaintained since 2002
2014-04-17 misc/salias: Unmaintained since 2002
2014-04-17 print/latex2slides: Unmaintained since 2002
2014-04-17 lang/sxm: Unmaintained since 2002
2014-04-17 textproc/pybook: Unmaintained since 2002
2014-04-17 mail/mailcrypt: Unmaintained since 2002
2014-04-17 japanese/elvis: Unmaintained since 2002
2014-04-17 devel/prototype: Unmaintained since 2002
2014-04-17 print/wprint: Unmaintained since 2002
2014-04-17 science/euler: Unmaintained since 2002
2014-04-17 multimedia/gopchop: Unmaintained since 2002
2014-04-17 science/gdis: Unmaintained since 2002
2014-04-17 net/googolplex: Unmaintained since 2002
2014-04-17 lang/logo: Unmaintained since 2002
2014-04-17 textproc/roap: Unmaintained since 2002
2014-04-17 x11-wm/afterstep-i18n: Unmaintained since 2002
2014-04-17 games/yamsweeper: Unmaintained since 2002
2014-04-17 net-mgmt/echolot: Unmaintained since 2002
2014-04-17 security/pam_smb: Unmaintained since 2002
2014-04-18 devel/lua-redis-parser: Broken for more than 6 months
2014-04-18 biology/finchtv: Broken for more than 6 months
2014-04-18 net-im/ari-yahoo: Broken for more than 1 year (http://www.icculus.org/ari-yahoo/)
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
These ports will fail configuration if gnome-doc-utils is not present.
Likely a common dependency loaded it in the past, but not anymore.
Explicitly list gnome-doc-utils as a build dependency in order to
fix the recent breakage of these ports.
Also reset maintainership of etherape - maintainer gone for more than
one yet now.
Approved by: portmgr (bdrewery)
2014-04-10 www/screem: gnome-menus 2.x will be updated in the GNOME 3 import
2014-04-10 deskutils/nautilus-actions: nautilus will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 deskutils/nautilus-sendto: nautilus will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 deskutils/nautilus-open-terminal: nautilus will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 sysutils/eiciel: nautilus will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 sysutils/nautilus-cd-burner: nautilus will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 x11-fm/py-nautilus: nautilus will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 sysutils/sensors-applet: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 net/link-monitor-applet: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 net/netspeed_applet: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 net/remmina-applet: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 misc/uf-view: gnome-desktop 2.x will be updated in the GNOME 3 import
2014-04-10 textproc/uim-gnome: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 audio/istream: gnome-panel will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 mail/contact-lookup-applet: gnome-panel will be updated to the 3.x version which is not compatible with 2.x
2014-04-10 security/tuntun: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 misc/quick-lounge-applet: gnome-panel 2.x will be updated in the GNOME 3 import
2014-04-10 sysutils/bubblemon2: gnome-panel 2.x will be updated in the GNOME 3 import
USES libtool
Chase libxklavier shlib change
On all ports depending on libxklavier:
- Support stage
- USES=libtool when possible to reduce overlinking
- Support packaging as a user
keyboard work automatically, and uses the Xfce mixer's defined card and track
for chosing which track to act on.
WWW: https://launchpad.net/xfce4-volumed/
PR: 188373
Submitted by: Sergey V. Dyatko
