While there replace USE_SQLITE=x by USES=sqlite:x.
PR: 208971
Submitted by: mat
Exp-run by: antoine
With hat: portmgr
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D5951
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Note: The following ports did not pass check-plist (CP) or stage-qa (QA)
tests. The sendmail port has many problems, but this was already known
by myself as I fixed it properly on DPorts last week. It's a forward
action to submit a PR against mail/sendmail.
* antivirus-milter (CP)
* dk-milter (CP)
* milter-regex (CP)
* sendmail (CP, QA)
approved by: PTHREAD blanket
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
(Also some white space fixes in dependent ports)
Approved by: portmgr (implicit, bump unstaged port)
This is a bugfix only release of exim. The most important fix was introduced in the
ports by local patch which is not needed now.
PR: 192625
Submitted by: pi
- Remove SA_1024 as it has been adandoned long ago [1]
- Fix message in post-install stage [1]
- Bump revision
Submitted by: Victor Ustugov via jabber [1]
- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
Changes in the port:
- Added new options:
* DNSSEC: validate peers using TLSA records
* PRDR: Per-Recipient-Data-Response support
* CERTNAMES: Check certiticates ownership
* DSN: Delivery Status Notifications
* PROXY: Experimental Proxy Protocol
- Enable OCSP stapling by default
- Disable NIS by default
- SRS support is now radio group
- DNSSEC and PRDR are now enabled by default
Changes in exim itself:
This release contains the following enhancements and bugfixes:
+ PRDR was promoted from Experimental to mainline
+ OCSP Stapling was promoted from Experimental to mainline
+ new Experimental feature Proxy Protocol
+ new Experimental feature DSN (Delivery Status Notifications)
+ TLS session improvements
+ TLS SNI fixes
+ LDAP enhancements
+ DMARC fixes (previous CVE-2014-2957) and new $dmarc_domain_policy
+ several new operations (listextract, utf8clean, md5, sha1)
+ enforce header formatting with verify=header_names_ascii
+ new commandline option -oMm
+ new TLSA dns lookup
+ new malware "sock" type
+ cutthrough routing enhancements
+ logging enhancements
+ DNSSEC enhancements
+ exiqgrep enhancements
+ deprecating non-standard SPF results
+ build and portability fixes
+ documentation fixes and enhancements
Uncompatible changes:
This release of Exim includes one incompatible fix: the behavior of
expansion of arguments to math comparison functions (<, <=, =, =>, >)
was unexpected, expanding the values twice. This fix also addresses a
security advisory, CVE-2014-2972. This is not a remote exploit, but if
content that is searched by the above math comparison functions is under
the control of an attacker, specially crafted data can be inserted that
will cause the Exim mail server to perform various file-system functions
as the exim user.
This is specifically important for DSO modules enabled in exim by default.
Without these flags modules were unable to use exim's API that has made this
feature completely unusable. [1]
- Fix minor issue with strip command by passing STRIP_CMD in the MAKE_ENV
- Bump portrevision
Submitted by: Victor Ustugov <victor at corvax.kiev.ua>
* now xclient is parsed by splitting, so xclient handling was rewritten;
* support xtext decoding;
* support of [UNAVAILABLE] and [TEMPUNAVAIL] that was broken;
* announce xclient in ehlo reply for hosts permitted for xclient;
* use verify_check_host as it seems to be the proper choice now.
- Remove blank lines from pkg-plist [1]
- Bump revision
Submitted by: bapt [1]
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
improving accessibility.
I think people who want to just find the port/package and install it are
more likely to look for "spamassassin the program" than "spamassassin the
perl module collection."
New Stuff since 4.80.1 (ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.82):
1. New command-line option -bI:sieve will list all supported sieve extensions
of this Exim build on standard output, one per line.
ManageSieve (RFC 5804) providers managing scripts for use by Exim should
query this to establish the correct list to include in the protocol's
SIEVE capability line.
2. If the -n option is combined with the -bP option, then the name of an
emitted option is not output, only the value (if visible to you).
For instance, "exim -n -bP pid_file_path" should just emit a pathname
followed by a newline, and no other text.
3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
has a "tls_dh_min_bits" option, to set the minimum acceptable number of
bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
acceptable for security. (Option accepted but ignored if using OpenSSL).
Defaults to 1024, the old value. May be lowered only to 512, or raised as
far as you like. Raising this may hinder TLS interoperability with other
sites and is not currently recommended. Lowering this will permit you to
establish a TLS session which is not as secure as you might like.
Unless you really know what you are doing, leave it alone.
4. If not built with DISABLE_DNSSEC, Exim now has the main option
dns_dnssec_ok; if set to 1 then Exim will initialise the resolver library
to send the DO flag to your recursive resolver. If you have a recursive
resolver, which can set the Authenticated Data (AD) flag in results, Exim
can now detect this. Exim does not perform validation itself, instead
relying upon a trusted path to the resolver.
Current status: work-in-progress; $sender_host_dnssec variable added.
5. DSCP support for outbound connections: on a transport using the smtp driver,
set "dscp = ef", for instance, to cause the connections to have the relevant
DSCP (IPv4 TOS or IPv6 TCLASS) value in the header.
Similarly for inbound connections, there is a new control modifier, dscp,
so "warn control = dscp/ef" in the connect ACL, or after authentication.
Supported values depend upon system libraries. "exim -bI:dscp" to list the
ones Exim knows of. You can also set a raw number 0..0x3F.
6. The -G command-line flag is no longer ignored; it is now equivalent to an
ACL setting "control = suppress_local_fixups". The -L command-line flag
is now accepted and forces use of syslog, with the provided tag as the
process name. A few other flags used by Sendmail are now accepted and
ignored.
7. New cutthrough routing feature. Requested by a "control = cutthrough_delivery"
ACL modifier; works for single-recipient mails which are recieved on and
deliverable via SMTP. Using the connection made for a recipient verify,
if requested before the verify, or a new one made for the purpose while
the inbound connection is still active. The bulk of the mail item is copied
direct from the inbound socket to the outbound (as well as the spool file).
When the source notifies the end of data, the data acceptance by the destination
is negociated before the acceptance is sent to the source. If the destination
does not accept the mail item, for example due to content-scanning, the item
is not accepted from the source and therefore there is no need to generate
a bounce mail. This is of benefit when providing a secondary-MX service.
The downside is that delays are under the control of the ultimate destination
system not your own.
The Recieved-by: header on items delivered by cutthrough is generated
early in reception rather than at the end; this will affect any timestamp
included. The log line showing delivery is recorded before that showing
reception; it uses a new ">>" tag instead of "=>".
To support the feature, verify-callout connections can now use ESMTP and TLS.
The usual smtp transport options are honoured, plus a (new, default everything)
hosts_verify_avoid_tls.
New variable families named tls_in_cipher, tls_out_cipher etc. are introduced
for specific access to the information for each connection. The old names
are present for now but deprecated.
Not yet supported: IGNOREQUOTA, SIZE, PIPELINING.
8. New expansion operators ${listnamed:name} to get the content of a named list
and ${listcount:string} to count the items in a list.
9. New global option "gnutls_allow_auto_pkcs11", defaults false. The GnuTLS
rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11
modules. For some situations this is desirable, but we expect admin in
those situations to know they want the feature. More commonly, it means
that GUI user modules get loaded and are broken by the setuid Exim being
unable to access files specified in environment variables and passed
through, thus breakage. So we explicitly inhibit the PKCS11 initialisation
unless this new option is set.
Some older OS's with earlier versions of GnuTLS might not have pkcs11 ability,
so have also added a build option which can be used to build Exim with GnuTLS
but without trying to use any kind of PKCS11 support. Uncomment this in the
Local/Makefile:
AVOID_GNUTLS_PKCS11=yes
10. The "acl = name" condition on an ACL now supports optional arguments.
New expansion item "${acl {name}{arg}...}" and expansion condition
"acl {{name}{arg}...}" are added. In all cases up to nine arguments
can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL.
Variable $acl_narg contains the number of arguments. If the ACL sets
a "message =" value this becomes the result of the expansion item,
or the value of $value for the expansion condition. If the ACL returns
accept the expansion condition is true; if reject, false. A defer
return results in a forced fail.
11. Routers and transports can now have multiple headers_add and headers_remove
option lines. The concatenated list is used.
12. New ACL modifier "remove_header" can remove headers before message gets
handled by routers/transports.
13. New dnsdb lookup pseudo-type "a+". A sequence of "a6" (if configured),
"aaaa" and "a" lookups is done and the full set of results returned.
14. New expansion variable $headers_added with content from ACL add_header
modifier (but not yet added to messsage).
15. New 8bitmime status logging option for received messages. Log field "M8S".
16. New authenticated_sender logging option, adding to log field "A".
17. New expansion variables $router_name and $transport_name. Useful
particularly for debug_print as -bt commandline option does not
require privilege whereas -d does.
18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a
proposed extension to SMTP from Eric Hall.
19. The pipe transport has gained the force_command option, to allow
decorating commands from user .forward pipe aliases with prefix
wrappers, for instance.
20. Callout connections can now AUTH; the same controls as normal delivery
connections apply.
21. Support for DMARC, using opendmarc libs, can be enabled. It adds new
options: dmarc_forensic_sender, dmarc_history_file, and dmarc_tld_file.
It adds new expansion variables $dmarc_ar_header, $dmarc_status,
$dmarc_status_text, and $dmarc_used_domain. It adds a new acl modifier
dmarc_status. It adds new control flags dmarc_disable_verify and
dmarc_enable_forensic.
22. Add expansion variable $authenticated_fail_id, which is the username
provided to the authentication method which failed. It is available
for use in subsequent ACL processing (typically quit or notquit ACLs).
23. New ACL modifer "udpsend" can construct a UDP packet to send to a given
UDP host and port.
24. New ${hexquote:..string..} expansion operator converts non-printable
characters in the string to \xNN form.
25. Experimental TPDA (Transport Post Delivery Action) function added.
Patch provided by Axel Rau.
26. Experimental Redis lookup added. Patch provided by Warren Baker.
Changes since 4.80.1 (ftp://exim.inode.at/exim/ChangeLogs/ChangeLog-4.82):
PP/01 Add -bI: framework, and -bI:sieve for querying sieve capabilities.
PP/02 Make -n do something, by making it not do something.
When combined with -bP, the name of an option is not output.
PP/03 Added tls_dh_min_bits SMTP transport driver option, only honoured
by GnuTLS.
PP/04 First step towards DNSSEC, provide $sender_host_dnssec for
$sender_host_name and config options to manage this, and basic check
routines.
PP/05 DSCP support for outbound connections and control modifier for inbound.
PP/06 Cyrus SASL: set local and remote IP;port properties for driver.
(Only plugin which currently uses this is kerberos4, which nobody should
be using, but we should make it available and other future plugins might
conceivably use it, even though it would break NAT; stuff *should* be
using channel bindings instead).
PP/07 Handle "exim -L <tag>" to indicate to use syslog with tag as the process
name; added for Sendmail compatibility; requires admin caller.
Handle -G as equivalent to "control = suppress_local_fixups" (we used to
just ignore it); requires trusted caller.
Also parse but ignore: -Ac -Am -X<logfile>
Bugzilla 1117.
TL/01 Bugzilla 1258 - Refactor MAIL FROM optional args processing.
TL/02 Add +smtp_confirmation as a default logging option.
TL/03 Bugzilla 198 - Implement remove_header ACL modifier.
Patch by Magnus Holmgren from 2007-02-20.
TL/04 Bugzilla 1281 - Spec typo.
Bugzilla 1283 - Spec typo.
Bugzilla 1290 - Spec grammar fixes.
TL/05 Bugzilla 1285 - Spec omission, fix docbook errors for spec.txt creation.
TL/06 Add Experimental DMARC support using libopendmarc libraries.
TL/07 Fix an out of order global option causing a segfault. Reported to dev
mailing list by by Dmitry Isaikin.
JH/01 Bugzilla 1201 & 304 - New cutthrough-delivery feature, with TLS support.
JH/02 Support "G" suffix to numbers in ${if comparisons.
PP/08 Handle smtp transport tls_sni option forced-fail for OpenSSL.
NM/01 Bugzilla 1197 - Spec typo
Bugzilla 1196 - Spec examples corrections
JH/03 Add expansion operators ${listnamed:name} and ${listcount:string}
PP/09 Add gnutls_allow_auto_pkcs11 option (was originally called
gnutls_enable_pkcs11, but renamed to more accurately indicate its
function.
PP/10 Let Linux makefile inherit CFLAGS/CFLAGS_DYNAMIC.
Pulled from Debian 30_dontoverridecflags.dpatch by Andreas Metzler.
JH/04 Add expansion item ${acl {name}{arg}...}, expansion condition
"acl {{name}{arg}...}", and optional args on acl condition
"acl = name arg..."
JH/05 Permit multiple router/transport headers_add/remove lines.
JH/06 Add dnsdb pseudo-lookup "a+" to do an "aaaa" + "a" combination.
JH/07 Avoid using a waiting database for a single-message-only transport.
Performance patch from Paul Fisher. Bugzilla 1262.
JH/08 Strip leading/trailing newlines from add_header ACL modifier data.
Bugzilla 884.
JH/09 Add $headers_added variable, with content from use of ACL modifier
add_header (but not yet added to the message). Bugzilla 199.
JH/10 Add 8bitmime log_selector, for 8bitmime status on the received line.
Pulled from Bugzilla 817 by Wolfgang Breyha.
PP/11 SECURITY: protect DKIM DNS decoding from remote exploit.
CVE-2012-5671
(nb: this is the same fix as in Exim 4.80.1)
JH/11 Add A= logging on delivery lines, and a client_set_id option on
authenticators.
JH/12 Add optional authenticated_sender logging to A= and a log_selector
for control.
PP/12 Unbreak server_set_id for NTLM/SPA auth, broken by 4.80 PP/29.
PP/13 Dovecot auth: log better reason to rejectlog if Dovecot did not
advertise SMTP AUTH mechanism to us, instead of a generic
protocol violation error. Also, make Exim more robust to bad
data from the Dovecot auth socket.
TF/01 Fix ultimate retry timeouts for intermittently deliverable recipients.
When a queue runner is handling a message, Exim first routes the
recipient addresses, during which it prunes them based on the retry
hints database. After that it attempts to deliver the message to
any remaining recipients. It then updates the hints database using
the retry rules.
So if a recipient address works intermittently, it can get repeatedly
deferred at routing time. The retry hints record remains fresh so the
address never reaches the final cutoff time.
This is a fairly common occurrence when a user is bumping up against
their storage quota. Exim had some logic in its local delivery code
to deal with this. However it did not apply to per-recipient defers
in remote deliveries, e.g. over LMTP to a separate IMAP message store.
This change adds a proper retry rule check during routing so that the
final cutoff time is checked against the message's age. We only do
this check if there is an address retry record and there is not a
domain retry record; this implies that previous attempts to handle
the address had the retry_use_local_parts option turned on. We use
this as an approximation for the destination being like a local
delivery, as in LMTP.
I suspect this new check makes the old local delivery cutoff check
redundant, but I have not verified this so I left the code in place.
TF/02 Correct gecos expansion when From: is a prefix of the username.
Test 0254 submits a message to Exim with the header
Resent-From: f
When I ran the test suite under the user fanf2, Exim expanded
the header to contain my full name, whereas it should have added
a Resent-Sender: header. It erroneously treats any prefix of the
username as equal to the username.
This change corrects that bug.
GF/01 DCC debug and logging tidyup
Error conditions log to paniclog rather than rejectlog.
Debug lines prefixed by "DCC: " to remove any ambiguity.
TF/03 Avoid unnecessary rebuilds of lookup-related code.
PP/14 Fix OCSP reinitialisation in SNI handling for Exim/TLS as server.
Bug spotted by Jeremy Harris; was flawed since initial commit.
Would have resulted in OCSP responses post-SNI triggering an Exim
NULL dereference and crash.
JH/13 Add $router_name and $transport_name variables. Bugzilla 308.
PP/15 Define SIOCGIFCONF_GIVES_ADDR for GNU Hurd.
Bug detection, analysis and fix by Samuel Thibault.
Bugzilla 1331, Debian bug #698092.
SC/01 Update eximstats to watch out for senders sending 'HELO [IpAddr]'
JH/14 SMTP PRDR (http://www.eric-a-hall.com/specs/draft-hall-prdr-00.txt).
Server implementation by Todd Lyons, client by JH.
Only enabled when compiled with EXPERIMENTAL_PRDR. A new
config variable "prdr_enable" controls whether the server
advertises the facility. If the client requests PRDR a new
acl_data_smtp_prdr ACL is called once for each recipient, after
the body content is received and before the acl_smtp_data ACL.
The client is controlled by bolth of: a hosts_try_prdr option
on the smtp transport, and the server advertisement.
Default client logging of deliveries and rejections involving
PRDR are flagged with the string "PRDR".
PP/16 Fix problems caused by timeouts during quit ACLs trying to double
fclose(). Diagnosis by Todd Lyons.
PP/17 Update configure.default to handle IPv6 localhost better.
Patch by Alain Williams (plus minor tweaks).
Bugzilla 880.
PP/18 OpenSSL made graceful with empty tls_verify_certificates setting.
This is now consistent with GnuTLS, and is now documented: the
previous undocumented portable approach to treating the option as
unset was to force an expansion failure. That still works, and
an empty string is now equivalent.
PP/19 Renamed DNSSEC-enabling option to "dns_dnssec_ok", to make it
clearer that Exim is using the DO (DNSSEC OK) EDNS0 resolver flag,
not performing validation itself.
PP/20 Added force_command boolean option to pipe transport.
Patch from Nick Koston, of cPanel Inc.
JH/15 AUTH support on callouts (and hence cutthrough-deliveries).
Bugzilla 321, 823.
TF/04 Added udpsend ACL modifer and hexquote expansion operator
PP/21 Fix eximon continuous updating with timestamped log-files.
Broken in a format-string cleanup in 4.80, missed when I repaired the
other false fix of the same issue.
Report and fix from Heiko Schlichting.
Bugzilla 1363.
PP/22 Guard LDAP TLS usage against Solaris LDAP variant.
Report from Prashanth Katuri.
PP/23 Support safari_ecdhe_ecdsa_bug for openssl_options.
It's SecureTransport, so affects any MacOS clients which use the
system-integrated TLS libraries, including email clients.
PP/24 Fix segfault from trying to fprintf() to a NULL stdio FILE* if
using a MIME ACL for non-SMTP local injection.
Report and assistance in diagnosis by Warren Baker.
TL/08 Adjust exiqgrep to be case-insensitive for sender/receiver.
JH/16 Fix comparisons for 64b. Bugzilla 1385.
TL/09 Add expansion variable $authenticated_fail_id to keep track of
last id that failed so it may be referenced in subsequent ACL's.
TL/10 Bugzilla 1375 - Prevent TLS rebinding in ldap. Patch provided by
Alexander Miroch.
TL/11 Bugzilla 1382 - Option ldap_require_cert overrides start_tls
ldap library initialization, allowing self-signed CA's to be
used. Also properly sets require_cert option later in code by
using NULL (global ldap config) instead of ldap handle (per
session). Bug diagnosis and testing by alxgomz.
TL/12 Enhanced documentation in the ratelimit.pl script provided in
the src/util/ subdirectory.
TL/13 Bug 1301 - Imported transport SQL logging patch from Axel Rau
renamed to Transport Post Delivery Action by Jeremy Harris, as
EXPERIMENTAL_TPDA.
TL/14 Bugzilla 1217 - Redis lookup support has been added. It is only enabled
when Exim is compiled with EXPERIMENTAL_REDIS. A new config variable
redis_servers = needs to be configured which will be used by the redis
lookup. Patch from Warren Baker, of The Packet Hub.
TL/15 Fix exiqsumm summary for corner case. Patch provided by Richard Hall.
TL/16 Bugzilla 1289 - Clarify host/ip processing when have errors looking up a
hostname or reverse DNS when processing a host list. Used suggestions
from multiple comments on this bug.
TL/17 Bugzilla 1057 - Multiple clamd TCP targets patch from Mark Zealey.
TL/18 Had previously added a -CONTINUE option to runtest in the test suite.
Missed a few lines, added it to make the runtest require no keyboard
interaction.
TL/19 Bugzilla 1402 - Test 533 fails if any part of the path to the test suite
contains upper case chars. Make router use caseful_local_part.
TL/20 Bugzilla 1400 - Add AVOID_GNUTLS_PKCS11 build option. Allows GnuTLS
support when GnuTLS has been built with p11-kit.
Additionally, fix Exim monitor port.
QA page: http://codelabs.ru/fbsd/ports/qa/mail/exim/4.82
PR: ports/184522 by Larry Rosenman <ler@lerctr.org>
