1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-09 02:22:18 +00:00
Commit Graph

44 Commits

Author SHA1 Message Date
Dmitry Marakasov
b9398223bd Convert LICENSE= "GPLxx # or later" to "GPLxx+"
Approved by:	portmgr blanket
2016-01-12 16:20:31 +00:00
Dmitry Marakasov
983088abc6 - Clarify LICENSE
- Switch to options helpers
2016-01-07 14:43:55 +00:00
Kubilay Kocak
8097337fd9 archivers/ucl: Strip files, Add CONFLICTS (libucl)
- Strip installed binaries and libraries
- Add CONFLICTS against libucl
- Add LICENSE_FILE
- pkg-descr: Strip trailing-slash from WWW:
2014-11-28 02:12:42 +00:00
Baptiste Daroussin
161b92dff7 Clean up plist 2014-10-19 23:12:06 +00:00
John Marino
d0bb05930a Reset the 99 ports still listed under sylvio@
Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy.  Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.

Approved by:	portmgr (implicit)
2014-06-11 18:55:29 +00:00
Tijl Coosemans
553b3f1289 Drop libtool patch and .la library. 2014-05-05 21:54:32 +00:00
Tijl Coosemans
aad09bc5e2 When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)
2014-04-23 13:25:16 +00:00
Sunpoet Po-Chuan Hsieh
16638835a5 - Add OPTIONS_DEFINE 2014-03-08 20:05:10 +00:00
Baptiste Daroussin
c256145615 USES libtool 2014-02-05 14:02:19 +00:00
Baptiste Daroussin
57839f85cb Support stage 2013-12-26 16:24:05 +00:00
Baptiste Daroussin
b80ec3e204 Add NO_STAGE all over the place in preparation for the staging support (cat: archivers) 2013-09-20 13:11:20 +00:00
Alexey Dokuchaev
142171e3f3 For a number of ports in archives category, trim the header and drop leading
indefinite article from COMMENT line; also fix few noticed styles bugs while
I am here.
2012-12-18 07:57:31 +00:00
Sylvio Cesar Teixeira
da9a918f01 - Add license 2011-05-19 18:25:58 +00:00
Martin Wilke
65e190c0f0 - Get Rid MD5 support
With hat:	portmgr (myself)
2011-03-18 17:59:50 +00:00
Ade Lovett
4a8684e352 Sync to new bsd.autotools.mk 2010-12-04 07:34:27 +00:00
Sylvio Cesar Teixeira
ba072d1713 - Update my mail address to FreeBSD
Approved by:	miwi (mentor)
2009-11-27 22:52:30 +00:00
Martin Wilke
0b4d4198af - Pass maintainership to submitter
PR:		138587 138586 138584
Submitted by:	Sylvio Cesar <scjamorim@bsd.com.br>
Feature safe:	yes
2009-09-19 17:07:39 +00:00
Jeremy Messenger
789d75c728 -Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr
2009-08-02 19:36:34 +00:00
Rong-En Fan
741aa71483 Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)
2008-08-21 06:18:49 +00:00
Alexey Dokuchaev
91c2cb04b3 Clean up port descriptions for unmaintained ports in `archivers' category:
markup and spelling fixes, kill EOL whitespace and extraneous attribution.
2008-01-25 17:37:34 +00:00
Gabor Kovesdan
d8fc8c3302 - Remove distinfo hashes, which are not used officially
No objection from:	ports@, maintainers
Approved by:		portmgr (pav)
2007-07-19 21:37:13 +00:00
Kris Kennaway
ae994c8ea8 Use libtool port instead of included version to avoid objformat a.out botch 2007-02-01 02:42:05 +00:00
Cheng-Lung Sung
9ff4d01a3d - s,INSTALLS_SHLIB,USE_LDCONFIG,g 2006-08-14 09:56:58 +00:00
Ade Lovett
8503536d38 Conversion to a single libtool environment.
Approved by:	portmgr (kris)
2006-02-23 10:40:44 +00:00
Edwin Groothuis
44855e0b04 SHA256ify (manually done and checked)
Approved by:    krion@
2006-01-22 09:54:26 +00:00
Ade Lovett
54a0b86543 Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
2005-11-15 06:52:12 +00:00
David E. O'Brien
c3d8037aeb At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
2005-04-12 03:26:56 +00:00
David E. O'Brien
f2fc2d60ae Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
2005-04-11 08:04:41 +00:00
Sergei Kolobov
b907fae0dd - Update to 1.03
PR:		ports/72471
Submitted by:	Dima Panov <redfox@Fluffy.Khv.RU>

While I'm here:
- Install some additional documentation
- Shorten COMMENT
- Various cleanup
2004-10-12 07:54:43 +00:00
Joe Marcus Clarke
9e5632dd66 Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:		63944
Based on work by:eik and marcus
Approved by:	ade (autotools maintainer)
Tested by:	kris on pointyhat
Bound to be hidden problems:	You bet
2004-07-09 17:43:11 +00:00
Kirill Ponomarev
c83a0c91ce - Fix configure warning
PR:		65668 65669 65670 65671 65672 65673
Submitted by:	Roman Neuhauser <neuhauser at chello dot cz>
2004-04-17 19:12:38 +00:00
Ade Lovett
3f651573ad Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
2004-03-14 06:17:56 +00:00
Clement Laforet
701ab6a48b - Pacify portlint and use misc macros
- remove pkg-plist (fastjar and stuffit)
2004-02-27 12:10:37 +00:00
Trevor Johnson
e8d5605043 Add SIZE. 2004-01-27 20:51:07 +00:00
Pav Lucistnik
0589441975 - Update to 1.02
PR:		ports/60653
Submitted by:	Vincent Tantardini <vinc@FreeBSD-fr.org>
2003-12-28 15:18:01 +00:00
Sergey A. Osokin
ab8cf5f2db Cosmetic fix: use %%DOCSDIR%% macro.
No functionally changes.

Submitted by:	Oleg Karachevtsev <ok@etrust.ru>
A part of PR:	57992
2003-10-21 09:58:09 +00:00
Maxim Sobolev
10588346d3 Let be hohest: I really don't have a time now to properly maintain all
these great pieces of software, so that let others with more free time
to take over them.
2003-07-29 09:12:37 +00:00
Ade Lovett
7e52725f2a Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.
2003-03-07 06:14:21 +00:00
Edwin Groothuis
f0570da20b Removed MASTER_SITE_SUNSITE from the master_sites, it doesn't appear
it has ever been there.
Noticed by: portsurvey.
2002-12-28 03:49:15 +00:00
Maxim Sobolev
5bbbe3cd84 Update to 1.01.
PR:		39197
Prompted by:	Szymon Roczniak <simon@dischaos.com>
2002-08-30 12:04:11 +00:00
Maxim Sobolev
97d621d340 Update MASTER_SITES, WWW and autor's e-mail.
Submitted by:	Simon Dick <simond@irrelevant.org>
2002-01-14 10:14:59 +00:00
Maxim Sobolev
a3149caee4 Support NOPORTDOCS.
PR:		28576
Submitted by:	Patrick Li
2001-11-23 18:14:48 +00:00
Mario Sergio Fujikawa Ferreira
2275ee0bcf typo clean up police: \s -> \t 2001-02-14 05:43:00 +00:00
Maxim Sobolev
2e0758ebbb Add ucl 0.92, a data compression library with low memory usage during
decompression and competitive with zlib compression ratio.
2001-01-29 19:39:15 +00:00