/usr/X11R6 if USE_IMAKE or USE_X11 is set. It is mostly designed
after the XFree86 distribution, but also includes some of our own
goodies (libexec, share/doc, etc/rc.d).
(2) Full support for per-port dependency target. An optional
":<target>" can be added to any of the *_DEPENDS variables. Do
not attempt to print out anything about dependencies if NO_DEPENDS
is set (there was already too much code duplication, and this
extra colon has really pushed it over the limit).
Requested by: jfitz
(3) Make "reinstal" pmake-safe.
Reminded in an e-mail from: jkh
(default: IS_DEPENDED?=install) target on the depended port, call
DEPENDS_TARGET (default: install) from the depending port.
Other than being more flexible (some ports don't require the
dependency to be fully installed: see ghostscript4), this seems
like a more natural thing to do. (I never understood the
convoluted logic that was used before.)
By building packages with "DEPENDS_TARGET=package", I can avoid
file-sharing problems (like gs3 binary going into the gs4
package).
(2) Add new variable PATCH_SITE_SUBDIR and separate it from
MASTER_SITE_SUBDIR. Fixes linuxls port and is a correct thing to
do anyway.
Initially suggested and reviewed by: fenner
(3) Add new variable MASTER_SITE_LOCAL for local ports. Defaults to
LOCAL_PORTS subdir on ftp.freebsd.org's distfiles dir.
Submitted by: jkh
means.
(2) Change MASTER_SITE_GNU etc. to use += instead of ?=, so users can
specify a local mirror in /etc/make.conf and still get the full
fallback in case something is missing.
Submitted by: Narvi <narvi@haldjas.folklore.ee>
(3) Skip port if USE_X11 or USE_IMAKE is defined and /usr/X11R6
doesn't exist.
Submitted by: imp
(4) Add "-" in front of rmdir of ${DISTDIR}/${DIST_SUBDIR} in
distclean target; the directory might not be empty because the
subdir is shared with some other ports' distfiles.
mv, respectively. This will make Warner's life easier.
(2) Add new variable ${PLIST}, which defaults to ${PKGDIR}/PLIST.
If you need to have different PLISTs for different configurations,
you can either
@ pre-fabricate all of them and switch ${PLIST} to point to the
appropriate one, or
@ use sed/awk/perl/whatever to create the correct one from
pkg/PLIST and set ${PLIST} to it.
It is still recommended to have a file called "pkg/PLIST" so
people can do "grep badprog /usr/ports/*/*/pkg/PLIST" and such.
(3) Move /var/db/pkg/${PKGNAME} clash detection to before the
installation (instead of after) and make it fatal, with an error
message suggesting a workaround.
(4) Don't make distclean fail if DIST_SUBDIR is set and the
subdirectory does not exist.
(5) Don't put "@pkgdep Error code 2. Stop." kind of garbage into
packing list if depended port's directory doesn't exist. Instead,
print out a message to stderr.
${PORTSDIR}. This undoes the changes done in rev. 1.38 and 1.59
(part of the bsd.port.mk pre-dawn ages I've never understood).
Requested by: jkh
(2) Add new variable NO_IGNORE that will override any IGNORE causes.
This is just a little hack to allow building of REQUIRES_MOTIF
ports and its dependencies only etc., so don't document it.
(3) Update +REQUIRED_BY files as necessary. Now you should be able to
delete ports that have runtime dependencies without pkg_delete
complaining about this file missing.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
the original logic went into a section of code assuming some
incarnation is there, but it's basically a "test -d" fix. Closes PR
ports/2082.
Reviewed by: max ("although I didn't test it, it looks fine")
(1) Change commented out MAINTAINER to FreeBSD_MAINTAINER and
OpenBSD_MAINTAINER. These are not comments anymore, so we may
even use it in the future.
(2) Instead of the ".if ${OPSYS} = "NetBSD" hack, use ".if exists()"
to find the location of md5 an tar. Play similar trick for fetch
(OpenBSD uses /usr/bin/ftp which groks http: addresses).
This commit includes most of the changes made in 1.242 (although many
of them are done differently after more discussion). One thing that
is conspicuously missing is NOMANCOMPRESS, which has been postponed
until Warner figures out what exactly the situation is on the OpenBSD
ports paradigm. (In a nutshell, we can't just define NOMANCOMPRESS in
this file even if uncompressed manpages is the default for OpenBSD,
because that will take away the ability of individual users to select
manpage compression.)
Reviewed by: imp@openbsd.org
and scripts/{pre,post}-* as environment vars. Also, if BATCH is
set, "BATCH=yes" is automatically added to SCRIPTS_ENV.
(Requested by: max)
(2) The INSTALL_* macros are added to SCRIPTS_ENV and MAKE_ENV as
BSD_INSTALL_*. (Requested by: obrien)
(3) New variable MOTIF_ONLY, which will only build ports with
REQUIRES_MOTIF defined. This doesn't do dependencies right (what
if the depended port doesn't need Motif) yet.
(4) Try not to clean the same port twice in clean-depends when (for
instance) it's defined in both BUILD_DEPENDS and INSTALL_DEPENDS.
Note that it won't check chained dependencies so you may still see
the same port cleaned multiple times, but checking that far will
surely make this run slower than the un-"optimized" case so I left
it as is. (Requested by: jkh)
(5) Ignore *.rej files in patches/ directory in addition to *~ and
*.orig.
Generalize the selection of programs to run based on the existance of files
rather than the OS names that we find. Add comments about me being the
keeper of the OpenBSD mods of this file. Use ftp on OpenBSD rather than
fetch since OpenBSD's FTP supports urls and there is no fetch.
Reviewed by: Joerge Wunch, Jordan Hubbard, and others in ports I've forgotten
Obtained from: OpenBSD with changes from me.
Add a little more sophistication to the md5 grep command.
Change the md5 checksum logic a bit. Now, the message is printed
out for every successfully/unsuccessfully matched checksum, and it
aborts at the end if there was a mismatch. Also, make missing checksum
and IGNORE file inconsistency fatal, as there is now no reason to have
a missing checksum.
(1) MANLANG is now a list (defaulting to ""), so if you have English
and Japanese-EUC versions of the manpages, you can say something
like `MANLANG= "" ja_JP.EUC' and manpage compression will DTRT.
(2) Add new variables MAN%cPREFIX (where %c=[1-9LN]) which default to
MANPREFIX (which defaults to PREFIX), to specify per-section
prefixes. In particular, this handles the cases in many perl
ports, which install man1pages into man/man1 and man3pages into
lib/perl5/man/man3.
Note these modifications won't change the behavior of existing
variables used in previously-approved ways, so any Makefile that
worked before will still continue to work.
(1) Print out reason when port is ignored because of NO_CDROM,
RESTRICTED, IS_INTERACTIVE, (not) IS_INTERACTIVE, BROKEN,
REQUIRES_MOTIF or NO_PACKAGE.
Submitted by: obrien
(2) Add new special file in pkg/: DISPLAY. (Cf. man pkg_create)
(3) Minor bugfix in clean-depends target, which sometimes executed
"make clean" in the current directory. (Which is probably ok, but
is wrong nonetheless.)
you have a Makefile without one.
(2) Fix case when user had DISTDIR defined elsewhere and DIST_SUBDIR
is also defined. (Submitted by: max)
(3) Add several popular master sites as variables. For instance,
MASTER_SITE_XCONTRIB is defined to be a list of X11R6 contrib sites,
which you can set MASTER_SITES to in your Makefile if you just
want ftp.x.org or any of the mirror sites.
There is also a new variable, MASTER_SITE_SUBDIR, to specify which
subdirectory of the master site your tarball is located.
One nice thing this enables the user to do is to define the
nearest mirror site in /etc/make.conf. This is especially useful
for continents without a full FreeBSD master site.
Eventually, we will probably split this into a separate file
(bsd.port.sites.mk?), and add some more sites from all corners of
the world.
Right now, XCONTRIB, GNU, PERL_CPAN, TEX_CTAN, and SUNSITE are
supported.
(4) COMPRESS_MAN command alias is replaced by MAN[1-9LN] variables.
You just say "MAN1=foo.1 bar.1" and the make rules will
automatically compress it for you if necessary. (Idea by: obrien)
(5) New "distclean" target to delete distfile too. (Submitted by:
obrien)
(6) Chained dependency cleaning, can be turned off by NOCLEANDEPENDS.
Reviewed by: the ports list
Submitted by: Jason Thorpe <thorpej@nas.nasa.gov>
(2) Remove the bogus "CAT+=" definition. Closes PR ports/1703.
Submitted by: Peter Childs <pjchilds@imforei.apana.org.au>
(3) Change MKDIR to "/bin/mkdir -p", remove "-p" from ${MKDIR}
invocations. Closes PR ports/1901.
Submitted by: obrien
(4) Add a new macro variable COMPRESS_MAN, which will evaluate to gzip
if NOMANCOMPRESS isn't set (default), or true if it is.
(5) Add a new variable NO_CHECKSUM, which will disable the md5 checksum.
Submitted by: jkh
(6) Also, move NO_PATCH and NO_PACKAGE checks to right place in
invocation order.
(7) Check for LIB_DEPENDS before installation too. (It used to check
only before extraction.)
Forgotten a long time ago by: asami
Submitted by: max
While I'm here, add "${DIST_SUBDIR}/" at end of CDROM pathnames. Also
add an empty declaration of PATCH_SITES next to MASTER_SITES to avoid
"variable recursive" error.
bombing mercilessly.
(2) If that directory has a directory called CVS, remind the user of
the existence of the "-P" option to cvs co and update.
(3) While I'm here, clean up the PATCH_DEBUG code a bit. In
particular, don't duplicate a whole bunch of code just for adding
a single "echo" statement. ;)
Reviewed by: the ports list
won't be pulled into individual ports that include this file. ;)
(2) Document MOTIFLIB, it's not set in the ports Makefiles but is
important for Motif ports (already documented in the handbook).
(3) Add INSTALL_PROGRAM, INSTALL_SCRIPT, INSTALL_DATA, INSTALL_MAN as
"aliases" of the appropriate install command line, for use in *-install
targets.
Reviewed by: the ports list (item 3 only)
