operations in one central place, instead of doing them piecemeal all over
the place. This also includes the ability to customize settings per
port branch (e.g. XFREE86_VERSION)
Also, instead of hardcoding values of OSVERSION and OSREL which are going
to get forgotten again, pull them out of the source tree in ${branch}/src
so they track the head of the branch.
tangled up.
* Sort the environment variables so that all of the commented out ones
are grouped together
* Reverse sense of NOPLISTCHECK -> PLISTCHECK, since it's not an option
we want enabled by default (it causes too many build failures). This
was too easy to forget when building packages 'by hand' using the parallel
makefile.
* Copy across UNAME_VERSION into the chroot area so that uname inside the
chroot reports the desired version
* Shorten timeout period from 12 hours to 4 hours to avoid delaying the builds
unnecessarily.
* Reverse sense of NOPLISTCHECK -> PLISTCHECK, since it's not an option
we want enabled by default (it causes too many build failures). This
was too easy to forget when building packages 'by hand' using the parallel
makefile.
we want enabled by default (it causes too many build failures). This
was too easy to forget when building packages 'by hand' using the parallel
makefile.
* Display correct pathnames in build progress messages
* Add a -nocdrom option to avoid the (time-consuming) clean-for-cdrom-list
target
* Remove x11/XFree86 from dummyports since we don't want to use an old
stale version of the package which never gets rebuilt
* Add comments noting that we should check for CVS conflicts in the cvs
update scripts and exit gracefully.
we want enabled by default (it causes too many build failures). This
was too easy to forget when building packages 'by hand' using the parallel
makefile.
* Don't require the script to be called from inside the branch directory;
follow standard practise and pass the branch to build as an argument.
* Populate the chroot with the BSD.local.dist mtree file
* Add whitespace for readability, and sprinkle liberally with comments
* Comment on some inscrutable parts of the script which were presumably
put there to work around a (perceived) problem, but which I can't
understand.
of just proclaiming "error(s) occurred". This should immediately identify
which port is causing the build to break (although it's a bit of a verbose
solution).
* Update the list of ports which takes a long time to build.
* Don't use a single ports collection for every port build, indirect through
${pb}/${branch}/ports so we can have different ports collections for
each branch. Add -noportscvs option to prevent cvs update of ports
collection.
* Remove 3.x as a valid branch, add 4-exp for the 4.x experimental builds
used for testing bsd.port.mk patches
* Update usage information
decide machines which should be handed new jobs. Also, at some point someone
added a note about a possible bug in the reportload script which causes
this one to fall over.
down to user support flaws in the FreeBSD ports system. The flaw in question
is related to the fact that dependencies are often "chained", which allows to
simplify maintenance of ports with large number of implied dependencies (a la
Evolution, Nautilus, you-name-it). Dependency chaining it's not a problem by
itself, but the fact that when building or installing a port the system doesn't
check chain integrity - it's only checks that dependencies explicitly
specified in port's Makefile are satisfied, which opens wide window for
various hard-trackable problems when one or more links in the middle of the
chain missed.
The idea behind the tool is quite simple - it should be executed right after
main dependency checking procedure, two times for each build - check build-time
chain before building the port (pre-pre-extract) and check run-time chain
before installing the port (pre-pre-install). When executed, the tool checks
integrity of the specified chain (build-time, run-time or both) and reports all
errors, both fatal (dependency isn't installed) and non-fatal (dependency is
installed, but different version).
I've wrote this tool mostly to simplify maintenance of the GNOME ports, but
it doesn't contain anything GNOME-specific, so that it could be used in the
other parts of tree as well.
As an example I've added GNOME_VALIDATE_DEPS_CHAIN knob into bsd.gnome.mk (off
by default), which enables automatic chain validation for all ports that
USE_GNOMELIBS. This is a bit hackish, because I've used pre-extract and
pre-install targets - what we probably need is a generic way to plug various
custom tasks specified in bsd.xxx.mk (where xxx is kde, gnome, python, etc.)
into various parts of the build process (something like {pre,post}-pre-foo,
{pre,post}-post-foo springs into my mind).
The code is quite raw, so that I would appreciate any bug reports, patches,
suggestions, constructive critiquie and so on.
file. For example I'm usually keeping all working directories in /tmp using
WRKDIRPREFIX, while for the quick access to a port's files creating a symlink
to this directory in skeleton's dir (i.e. ports/foo/bar/src -->
/tmp/usr/ports/foo/bar/work/bar-0.0) and with this patch the tool correctly
works when I'm specifying `src/foo.c' as an argument.
Add mkppackage, which will create a "fake"-style package, but not
really. It doesn't try fake PREFIX and such to the build (it's not
really possible anyway yet), but it uses pkg_create's '-s' option to
pretend the package generated was installed in ${PREFIX}.
a work/ dir in the repository placed there by addport without permission.
Also restore the rcsids from the predecessors of this script by removing
their $'s.
If I had more time, I'd just revamp parts of this script.
Submitted by: greid
Apologies to: greid && cvs@
tool has something in common with update-patches shell script, but has more
features and is more intelligent. See README.patchtool or source code for
details.
categories which were failing to be mapped from directory to port name
because 'make index' can't know to run 'make describe' in directories
it doesn't know exist.
(2) (portbuild) Change no-output timeout from 1800 to 3600. Some ports
seem to actually take more than 30 minutes inside a command.
(3) (portbuild) Add -p flag to tar when extracting bindist.
(4) (makeindex) Remove the -j flag to make index, the argument was 1 anyway.
(1) The script now assumes make(1) knows how to handle long dependency
chains properly. quickports is a list of ports that take a
long time to build by thesmelves (not ports that have long
dependency chains). The script adds several extra dependency
levels to the generate Makefile for those ports to make their
dependency chains longer.
(2) Use -R flag to cvs. Comment out the cvsup part.
(3) Preserve error messages for ports that didn't build the first
time around but did build on the retry.
(4) Record the package's timestamps in the log directory by doing
an "ls -asFlrt" in the packages/All directory.
(5) Add a little sleep after two background jobs so outputs won't
be garbled.
guess WRKSRC or PATCHDIR. Don't munge "." characters in filenames.
This requires support in bsd.port.mk, a patch for which is in PR
24292.
Submitted by: Christian Weisgerber <naddy@mips.inka.de>
which holds final veto power over what @dirrm lines go into the plist.
This is a bit less evil than all the regexps previously used to manually
remove those directories.
mkpbuild just builds a port with WRKDIRPREFIX and PREFIX set to a
directory in /tmp, and with the owner and group variables set to the
user. A placeholder - in future, it'll have build error/log parsing.
mkpinstall's claim to fame is to do the same, except with "make install"
instead of "make build", and it then parses the mtree file, and compares
that and the current directory tree and the files, and auto-generates a
plist.
They're not pretty, but they finish the mkptools set basic
functionality: automatic skeleton generation with mkpskel, on-extraction
requirements guessing, and plist generation.
Future direction might be parsing build and install failures, checking
for '/usr/local' abuse, more requirements guessing, and stuff like that.
to the extra testing's make procs. Fix _stupid_ mistake where -n option
had no effect on hindering ``cvs add'' and CVSROOT/modules updating.
Cosmetics; remove extra space in generated commit log message and fix the
usage section's style in regards to options that take arguments. Add
missing -g option's mention.
Submitted by: assar (DISTDIR, CVSROOT/modules updating routine bugs)
than CVSROOT (now ADDPCVSROOT) to avoid conflicts for people who normally
set CVSROOT to something besides freefall (like myself). Second, allow
autofill to work for non-PR additions by checking for a -l argument of -1.
Third, remove the bogus $portname check in autofill that screws up if you
are adding something with a PKGNAMEPREFIX (i.e. p5-).
let portlint fill out your commit log message. It takes data from your
port's Makefile and pkg-comment to generate this, then displays the
resulting file and gives a chance to fix any problems.
Also, change -c option to move the file to the temp directory. Since -c
and -l option conflict, -l will take precedence. Move -c option down to
where directories are parsed.
Reviewed by: Jeremy Shaffner <jeremy@external.org>
new port. Slight hack used to obtain absolute path for the file. I'll
probably change that to make it copy the file to the tmpdir instead. For
now, this provides a stepping stone to use to begin automating commit log
messages - with, of course, a chance to edit the file again.
is going to commit a large number of ports and doesn't want to bloat
the repo any more than necessary. Later on I'll add support to
modulesupdate to do multiple modules at the same time. I should check that
script in CVS, but nobody's repocopied non-ports-specific tools to src yet
to my knowledge so I can't do that.
cvs ops. Many committers found it difficult to debug while using addport
with the -n argument. I'm inclined to agree with the sentiment.
Submitted by: sada, deischen, others
ftp site (specified in portbuild.conf). (It used to be implied by
-norestr.)
(2) Remove x11-toolkits/Motif-dummy from list of dummy ports, since
open-motif is now the default. Also gone is the MOTIF_OPEN
variable.
(3) Run the tar -czf of the ports tree and generation of CHECKSUM.MD5
in the background.
(4) Print the amount of time it took for the entire process, as well
as phase 1 and phase 2 of the compilations. (It is done by date
-r, so it will only work modulo 24 hours. Hopefully the build
will never go over 24 hours again.)
(5) Make symlink of the form [ae].${branch}.YYYYMMDD ->
[ae].${branch}.YYYYMMDDHH so we can have the simple "date" form as
well as the new "date+hour" directories for logs.
(6) Remove temporary make status files from /tmp that are over 60
minutes since the last modification. It was filling up the root
filesystem.
(7) Print out an "ls -lrt" of packages/All into logs/ls-lrt. This is
going to be used to evaluate make's job dispatch policies.
1) Re-add functionality removed in revision 1.11, but only as an option.
This time, it checks out its own copy of ports/Mk and points PORTSDIR
at the correct location. To use this, use the -a option. It will not
work if it can't find portlint in your path.
2) Add option -f to disable fetching the distfile.
3) Add option -m to disable checking out a copy of Mk for 1). For those
that have a current Mk in PORTSDIR and don't want to check out a fresh
copy for whatever reason.
4) Support CVSROOT environment variable.
5) Note environment variables recognized by addport.
6) Fix breakage trying to use -d with multiple directories (not tested).
7) Actually use $interactive variable.
8) Update usage().
9) Note original RCSID for my shell script; take over as MAINTAINER.
Tested by: gshapiro (this revision was used in adding sendmail)
mkptools are broken up into simple scripts:
mkpskel takes a distribution file as an argument and generates a
skeleton; it guesses the extract method, the package name, and so forth,
and generates populated Makefile and distinfo and empty pkg-descr,
pkg-comment, and pkg-plist.
mkpextr goes through the extract phase, and generates what it believes
are the necessary variables necessary to build the port. It guesses the
work source directory, what the Makefile is called, whether it has
configure, whether to use libtool, and other bits such as wildly
guessing kde, qt, gtk, gnome, and ssl requirements. Run it in a port
directory, and it generates Makefile.extr.
mkpmerge merges the results from mkpskel and mkpextr (and will later
merge the results from the other phases) into Makefile.
mkpclean cleans up any extra files that may be hanging about.
automatic checking on their ports to be added, I'm removing it and its
overriding -v option. Let the improper port additions continue, and screw
anyone who doesn't care about the repo.
Propelled by: obrien, msmith
mtree outputs.
Also change the title of the file from "List of extra files and
directories" to "List of files and directories that do not match their
mtree description", which is more accurate.
/var/portbuild is the new designated home of the portbuild setup, and
is expected to be a symlink to wherever you choose to put the stuff.
Also, change reportload to use /var/portbuild to store temporary files.
Seems there are some bugs in the null mount code that make the files
inaccessible if you are using an NFS root.
