of jobs that have already run. It obtains its information from your catalog
database. Aside from a nice graphical display, it provides summaries of your
jobs, as well as graphs of job usage. This is a fairly high level bacula
management tool. Here are a few points that one user made concerning this
important tool:
- It is web-based so can be accessed from anywhere.
- It is "read only" users can examine the state of the backups but not write
to anything and therefore do no damage
- It packs a phenomenal amount of information into a single web-page - that I
credit as being very good design!
The documentation for bacula-web can be found in a separate bacula-web
document in the bacula-docs release.
WWW: http://www.bacula.org/
PR: ports/107617
Submitted by: Dan Langille <dan at langille.org>
NDPMon, Neighbor Discovery Protocol Monitor, is a tool working with
ICMPv6 packets. NDPMon observes the local network to see if nodes
using neighbor discovery messages behave properly. When it detects
a suspicious Neighbor Discovery message, it notifies the administrator
by writing in the syslog and in some cases by sending an email
report.
WWW: http://ndpmon.sourceforge.net
Janos Mohacsi <janos.mohacsi@bsd.hu>
PR: ports/106840
Submitted by: janos.mohacsi at bsd.hu
or network device clients. It is used to transfer
configurations, boot images, and kernels images
(eg: IOS) to the devices.
These files are often tranfered with TFTP, but TFTP
has reliability and speed issues and file size
limitations due to it's protocol specification and
underlying transport; while RCP is not affected.
WWW: http://www.shrubbery.net/rcpd/
Submitted by: Babak Farrokhi <farrokhi at FreeBSD.org>
* It will monitor nearly anything you ask it to monitor (TCP + UDP
applications, IP connectivity, SNMP OIDS, Programs, Databases,
etc).
* It presents a nice clean, easy to view web interface that will keep both the
managers happy (Red Bad. Green Good.) and the techs happy ("Ah! that's what
the problem is").
* It can send alerts numerous ways (such as via pager) and can automatically
escalate if someone falls asleep.
WWW: http://argus.tcp4me.com/
PR: ports/105837
Submitted by: Brock Williams <brock@gringo.cotcomsol.com>
tables reachable from other hosts. You can add/delete/flush
IP addresses to/from a remote table with a single UDP
datagram. A simple client program is included to do this
from the command line.
WWW: http://wolfermann.org/pftabled.html
PR: ports/105713
Submitted by: Bartlomiej Rutkowski <r at robakdesign.com>
With TkNetmon someone can create graphical network map, produce config file
for "netmond", restart it, and view current network objects state,
as it reported by netmond.
WWW: http://vfom.narod.ru/TkNetmon
PR: ports/105562
Submitted by: Viktor Fomichev (ivfom at narod.ru)
web-based user interface for selecting, viewing, graphing, and now tracking
NetFlow data stored using Mark Fullmer's flow-tools software.
The user is able to filter data (inclusion or exclusion) by device, IP address
range, port, router interface, autonomous system (AS), specified time interval,
and now by protocols, TOS field, and TCP flags. Many of the flow-tools reports
are configured as drop-down selections. Users are also able to save reports and
graphs for later viewing.
WWW: http://ensight.eos.nasa.gov/FlowViewer/
PR: ports/104554
Submitted by: Alex Samorukov, samm at os2.kiev.ua
Arpalert uses ARP protocol monitoring to prevent unauthorized connections
on the local network. If an illegal connection is detected, a program or
script is launched, which could be used to send an alert message, for example.
WWW: http://www.arpalert.org/
vulnerabilities it has, and how they can be used in practice to
break a WEP protected wireless network. So far, WepLab more than
a Wep Key Cracker, is a Wep Security Analyzer designed from an
educational point of view.
WWW: http://weplab.sourceforge.net
PR: ports/102476
Submitted by: Anton Karpov <toxa at toxahost.ru>
to collect, visualize and analyze IP accounting data from the
Cisco routers.
Cisco routers themselves are capable of collecting IP accounting
information . i.e. an unordered set of IP source-destination
pairs along with a byte and packet counters corresponding to all
network traffic flows that passed through the router's interfaces.
These data can be a useful source for various analysis procedures
and billing systems but by itself, in their raw form they are
rather difficult to read and understand. In addition, a router
cannot keep a lot of data . its memory is needed for purposes
other than remembering what traffic, from what sources and where
it forwarded two month ago.
WWW: http://ipacco.sourceforge.net/
- Babak Farrokhi
babak@farrokhi.net
PR: ports/99451
Submitted by: Babak Farrokhi <babak@farrokhi.net>
plugins, insert the data into rrdtool database, and generate webpages
with rrdtool graphs of the performance data. nagiosgraph is easy to
configure, and ready to use for many nagios plugins.
WWW: http://nagiosgraph.sourceforge.net/
PR: ports/96769
Submitted by: Denis Shaposhnikov <dsh@vlink.ru>
Nettop is a program which looks like top, but is for network packets.
It requires libpcap and slang to be installed on your computer.
WWW: http://srparish.net/scripts/
for a subset of ASN.1 data types, sockets based networking etc.)
written entirely in Python. This package provides command-line utilities
(pysnmpget, etc).
WWW: http://pysnmp.sourceforge.net/
PR: ports/95675
Submitted by: Martin Jackson <mhjacks@swbell.net>
for a subset of ASN.1 data types, sockets based networking etc.)
written entirely in Python. This package provides additional python-format
MIB files for use with PySNMP.
WWW: http://pysnmp.sourceforge.net/
PR: ports/95674
Submitted by: Martin Jackson <mhjacks@swbell.net>
for a subset of ASN.1 data types, sockets based networking etc.)
written entirely in Python.
WWW: http://pysnmp.sourceforge.net/
PR: ports/95673
Submitted by: Martin Jackson <mhjacks@swbell.net>
you an overview of all services with troubled services.
WWW: http://www.vanheusden.com/nagcon
PR: ports/95096
Submitted by: Douglas K. Rand <rand@meridian-enviro.com>
Bandwidth Monitor NG is a small and simple console-based live
bandwidth monitor for Linux, BSD, Solaris, Mac OS X and others.
Short list of features:
* supports /proc/net/dev, netstat, getifaddr, sysctl, kstat and libstatgrab
* unlimited number of interfaces supported
* interfaces are added or removed dynamically from list
* white-/blacklist of interfaces
* output of KB/s, Kb/s, packets, errors, average, max and total sum
* output in curses, plain console, CSV or HTML
* configfile
WWW: http://www.gropp.org/
This library implements SNMP (the Simple Network Management
Protocol). It is implemented in pure Ruby, so there are no dependencies
on external libraries like net-snmp. You can run this library anywhere
that Ruby can run.
against a radius server. This allows for more rapid
testing/troubleshooting of radius authentication problems depending
upon the method by which the person is authenticating (dial-up
customers come to mind).
Author: Matt Miller <mmiller_at_hick.org>
WWW: http://freshmeat.net/projects/radauth/
PR: ports/91975
Submitted by: Andrew Kilpatrick <tiger_at_whitetigersd.com>
Chillispot is used for authenticating users of a wireless
LAN. It support WPA (Wireless Protected Access) encryption.
Authentication, authorization and accounting (AAA) is handled
by your favorite radius server.
PR: ports/90397
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
