Release notes are available at
http://www.x.org/X11R6.8.2/doc/RELNOTES.html
Thanks to kris and krion for running several cluster test builds,
maintainers of GNOME for prompt responses, portmgr for postponing ports
freeze for this update, testers on FreeBSD-X11@ list and others that I
might have mised here.
Also included:
- fix for ATI Mobility on Dell Inspiron 7500 (obtained from Marc Aurele La
France; obtained and tested by julian)
- fix for kbd driver on Sparc64 (tested by Aaron Dudek, Michael G. Jung and
Matthias Muthmann), which still appears to have problems with some
keyboards - so
- fix for kbd driver on PC98 (reported and tested by NAKAJI Hiroyuki; PR
ports/77217)
- fix for i810 on HP D530 (obtained from Egbert Eich; obtained and tested
by Anders Nor Berle; PR ports/74757)
His idea was:
What do you guys think of changing the +='s in bsd.sites.mk to
?='s? The deal is this: say I have a specific AfterStep dist
site that I want to use, and I don't want the default listed
sites to be attempted at all.
As it stands now, there are two current solutions that I see:
* edit bsd.sites.mk after every cvsup
* put like 100 entries for that site in MASTER_SITE_AFTERSTEP
in /etc/make.conf and turn on RANDOMIZE_MASTER_SITES
His solution was:
Change the bsd.sites.mk to MASTER_SITE_AFTERSTEP?=, and then I
can define MASTER_SITE_AFTERSTEP to be whatever I want it to
be.
The final solution is:
Add an .if !defined(IGNORE_MASTER_SITE_xxx) / .endif around all
MASTER_SITE definitions:
+.if !defined(IGNORE_MASTER_SITE_XORG)
MASTER_SITE_XORG+= \
ftp://ftp.x.org/pub/%SUBDIR%/ \
ftp://ftp.gwdg.de/pub/x11/x.org/pub/%SUBDIR%/ \
[...]
+.endif
This way, if you want to ignore the default MASTER_SITE_xxx and use
a certain mastersite for this collection, you set this in your
/etc/make.conf:
IGNORE_MASTER_SITE_xxx=yes
MASTER_SITE_xxx=http://z.x.y/
While if you prefer a certain mastersite for this collection, you
set this in your /etc/make.conf:
MASTER_SITE_xxx=http://z.x.y/
NOTE: these are only added if the related variables are defined by the port.
This should ease the configuration of launcher shell scripts used for Java
application ports, when they are using javavmwrapper to invoke a JVM. From now,
a simple launcher that suits most of the Java application ports can be writen
using the following scheme:
#!/bin/sh
JAVA_VERSION="%%JAVA_VERSION%%" \
"%%LOCALBASE%%/bin/java" -jar "%%JAVAJARDIR%%/myport.jar" "$@"
As mentioned above, this is of course only correct provided that the port
defines JAVA_VERSION.
Approved by: glewis (co-maintainer)
- Sync up Motif selection algorithm with xemacs21-mule port.
- Remove GTK support for now, it was commented out and it does not work well.
- General Makefile cleanup
- Unbreak on sparc64
PR: ports/77291
Submitted by: Pawel Worach <pawel.worach(at)telia.com>
* Document DISABLE_VULNERABILITIES variable. [2]
* Add WWW: line for 'search' target. [3]
* Speedup check-vulnerable invokation, if portaudit is installed. [4]
* Run install-info for all .info files. [5]
* Run add-plist-docs more strictly and prevent some situations with
leftover files in the future. [6]
* Introduce two new variables: MASTER_PORT and SLAVE_PORT.
The results from these variables is only used as information for
users. [7]
* Honour OPTIONS if PACKAGE_BUILDING or BATCH are defined. [8]
* Move all USE_GCC entries to new file - bsd.gcc.mk. 'test-gcc'
target allows users to check gcc version if USE_GCC is used. Give
maintainers opportunity to add '+' character to USE_GCC version
for using specified and higher versions. [9]
* Install startup scripts with the help of USE_RC_SUBR variable. [10]
* Add three new targets: config-recursive, rmconfig-recursive and
config-conditional. You can set or delete OPTIONS for all
dependencies before every build. config-conditional target is
used to skip configuring ports which have already been
configured. [11]
* Fix using of WANT_PGSQL_VER variable if postgresql is already
installed. [12]
PR: ports/75768 [1], ports/75728 [2], ports/76187 [3],
ports/76191 [4], ports/76182 [5], ports/75379 [6],
ports/75286 [7], ports/75727 [8], ports/76489 [9],
ports/73691 ports/69217 [10], ports/76254 [11],
ports/76988 [12]
Submitted by: dinoex [1], edwin [2] [5] [6] [8] [9] [10],
Marcus Grando <marcus@corp.grupos.com.br> [3],
tobez and Valentin Nechayev <netch@netch.kiev.ua> [4],
linimon [7], Florent Thoumie <flz@xbsd.org> [10],
Chris Dillon <cdillon@wolves.k12.mo.us> [11],
girgen [12]
dropped and the lang/ruby16_r and lang/ruby18_r ports have been
removed, since no one seems to appreciate the partially working
solution.
Good news is that the pthread support of lang/ruby18 is now enabled by
default for newer systems, which means the ruby interpreter is linked
with libpthread. This will allow threaded extension libraries to run
and work properly on those systems.
The --march=cputype flag is disabled because it gets ruby to
malfunction and fail to build. I don't know if the problem is in
libpthread or in gcc.
(It really makes me wonder if they had actually tested before asking
me to do this somewhat risky change ;-)
Use more correct OSVERSION threshold to distinguish between
base system perl and perl from ports - the right value is 500036 [1].
Also, simplify OSVERSION-related logic in lang/perl5 and lang/perl5.8.
Now it goes as follows:
- for lang/perl5.8, if there is perl in the base system, install
use.perl script, use a helpful pkg-message, and do not automatically
update symlinks;
- for lang/perl5.8, if there is no perl in the base system, do not
install use.perl script, and update symlinks automatically;
- for lang/perl5, always install use.perl;
- for lang/perl5, never update symlinks automatically;
- for lang/perl5, vary produced pkg-message depending on the presence of
the base system perl.
Bump PORTREVISION for both lang/perl5 and lang/perl5.8.
[1] Approved by: portmgr
All ports depending on postgresql shall use the USE_PGSQL=yes knob
defined in Mk/bsd.ports.mk. Bumping portrevisions where needed.
PR: 75344
Approved by: portmgr@ (kris), ade & sean (mentors)
dependency on many python versions. This fixes a problem that Zope
product ports depend on both of Python 2.3 and 2.4 if they use not
only Zope itself but also 3rd party Python modules.
Submitted by: Filippo Natali <filippo.natali@widestore.net>
This site is pain in the butt. I'm sitting 280 km away from it, on ISP
backbone who have a direct link to Wien, and still I was not able to
pull more than 5000 bytes per second from this site in past year or two.
list. Both were set up with no SUBDIR. The former gives a "No
such directory" response and the latter only carries Alpha bits
from Red Hat 7.2, whereas I removed Alpha support from the Red Hat
7 linux_base port when I updated it to 7.3. I conclude that these
entries are no longer needed.
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
* Users may specify a nonstandard PREFIX to install somewhere. If they
are trying to use an USE_X_PREFIX=yes port, install with BSD.x11*.dist.
Otherwise, use BSD.local.dist. Ports that deliberately set a nonstandard
PREFIX must also set NO_MTREE to avoid spamming their hierarchy with an
inappropriate MTREE specfile.
Pointed out by: krion
with the reasonable use of that variable to hold date strings in the
environment [1]
* Overhaul the mtree spec file selection code: instead of deciding based
on the value of USE_X_PREFIX, compare PREFIX to X11BASE and LOCALBASE
directly. This fixes the MTREE_FILE for ports that set PREFIX=${X11BASE}
but don't set USE_X_PREFIX for some reason. If PREFIX is a
nonstandard value, set NO_MTREE=yes.
Noticed by: Jez Hancock <jez.hancock@gmail.com> [1]
linked with -pthread and -Wl,as-needed will have all references to libphthread
stripped (reason/reasoning unknown), causing funny runtime errors when Qt
decides to fire up a thread.
