Add a list of support architectures with a REASON that these are the only
supported targets. This will now skip this port on mips/mips64/armv6.
PR: 196970
Differential Revision: 196970
Reviewed by: hrs (in irc)
Approved by: mentor (implicit)
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).
Co-authors: bapt, madpilot and bsam (me)
The makefile already had USES defined in the NLS option.
After replacing USE_GMAKE with "USES= gmake", the value of USES is
subsequently overwritten by the default-on NLS option. Change the
NLS option to USES+= to fix.
Approved by: hrs (maintainer)
- Remove references to Tcl/Tk 8.3 from bsd.tcl.mk
- Update ports that required 8.3+ to require 8.4+ (since 8.5 is the
default, I don't expect this change to cause much trouble)
Features
--------
- PCB can directly import (forward annotate) schematics while running.
- Many places where measurements are entered now accept units, like
"5mm", and "cm" and "in" are allowed too.
- Free Rotate Buffer added to menu
- Polygon Hole tool.
- F12 invokes the Lock tool.
- Russian translation added.
- DBUS is enabled by default when possible.
- Command-line exporters can run action scripts too.
- GTK tool tips on elements, pins, and nets.
- Command-line actions in GUIs do not require (,,) syntax.
- PCB can import footprints both in subdirectories and the named directories.
- New GCode exporter.
- Footprint files use ".fp" as the suffix; this is automatically
searched for if needed.
- GTK dialogs do not show at startup unless requested.
- Stackup can be specified on the command line for command-line exporting.
- Reference card updated.
- The snap-point in pads is the center.
- The 's' key toggles polygons to clear/notclear all pads and pins
Bug Fixes
---------
- Various PNG export fixes.
- lesstif's magic toggle-layers-on-flip fixed.
- Arc bounding box math fixed.
- Fixed: sometimes, disabling silk also disabled the solder layer.
- "pcb --help" prints all options again
- Add mnemonic for "close without saving"
- Don't select silk on the back side when it's invisible.
- Various polygon rendering bugs fixed.
- PNG drill bloat export fixed.
- Attempts to change polygon clearance *on* polygons results in a hint.
- PNG doesn't segfault if not all graphic formats are supported.
- Various toporouter fixes and improvements
- HID_Mixed is supported in attribute dialogs
- Flipped rectangles in PS exports are drawn correctly.
- Optimizer removes micro-traces under pads.
- Vias, pins, and pads are now drawn under the mask instead of over.
- Minor bug fixes in RS274-X output.
- Bug fixes in postscript output
- DRC checks for annular ring on pads only uses the mininum annular
ring drc setting instead of also checking minimum copper width.
- Fix postscript output for zero length lines.
- Improve the 'save before closing' dialogs.
- Fixed bugs where objects attached to the cursor vanish sometimes.
- Allow outline layers to have only arcs.
- Added "Ben Mode" png output which provides a simulated "photograph"
of the board. Very nice for publications.
- Fix poly clearance around rotated pads.
- Fix the batch HID which had bit rotted a little.
- Display net names hierarchically.
- Various speed improvements in the GTK HID.
- Various speed improvements in the autorouter.
- Minor improvements to the windows port.
- Other various bug fixes.
- Added a footprin preview in the library window
- Added gnome/kde desktop integration files (app and mime icons, and
.desktop file)
- Added i18n support
- Updated dbus support
- Fix a number of GCC 4 compiler warnings
- Make the gtk gui more robust against malformed menu resource files
- Added checking for duplicate hot key definitions in the menu
resource file in the gtk gui.
- Improved support for building on win32.
- Removed automake/autoconf generated files from cvs
- Fixed some parallel make bugs
- Fixed some scrolling/panning bugs in the gtk gui.
- Added the ability to load edif netlists
- Closed a number of bugs in the sourceforge tracker
- Fix a bg in the x-y output files where the y values were mirrored
and offset
- Add XRENDER support to the lesstif HID to support layer transparency
- Fix some polygon dicer bugs
- Fix a handful of bugs in the png export HID
- Avoid vias snapping to pins and moving elements snapping to their
own pins/pads
- Fix a number of undo bugs
- Fix printer calibration
- Add global puller
- Various improvements to the postscript export HID
- Improve all the GetXY prompts in the menu resource files
- Improved the pin/via report
- Improved pin/pad vs grid snapping
- Various footprint improvements
o fixed some drill sizes
o fixed some silk sizes
o Added a handful of QFP family footprints
o Converted the QFP family to the hi-res format
- Added keystone, C&K, Nichicon, and Optek footprint libraries
- Add attribute editor to the GTK HID
- Add a fileselect() function to the HID spec
- Fix ps output with drill helper on
- Add a visual indicater when elements are locked
- Corrections to the manual
- BOM can export in mm as well as mil
- Fix a ps output bug with arcs
- Fix some memory leaks found with Coverity
- Added autoconf test for buggy versions of m4
- Fixed some footprint drill sizes
- Add user customizable menus for the gtk HID. The gtk HID now is
capable of reading the same format menu resource files as the
lesstif HID. This represents significant rework of the menu code
and menu callback code.
- Added Center() action
- Store the file format in the .pcb file. This will let pcb know when
presented with a file which is too new. The code for checking the
format was present in the prior snapshot.
- Fix DRC checking of square pads to square pads
- Added window panning/cursor warping
- Add the ability to directly load a footprint from a file as if it
were a complete layout.
- Add a Popup() action
- Add polygon clipping code. This is a big change to how polygons are
handled.
The new code now removes islands and correctly identifies open
circuits caused by a trace fully cutting through a polygon. In
addition, the RS-274-X output is now simpler and works with some
board houses that use older non-conforming sofware. Different
styles for thermal reliefs are also now supported as part of the
polygon clipper code.
- Add support for plugins
- Many improvements to the autorouter.
- Various improvements to the trace optimizer.
- Add a fontmode for editing pcb fonts
- Add progress() hook to HID structure
- Fix a bug with non-functional windows on some window managers
commonly found on OS-X
- Add support for controlling pcb via dbus
- Fix various bugs which would cause a crash
- Add --scale for postscript scaling
- Intercept window manager delete events with the GTK gui
- Scan the .pcb file for a FileVersion value. This is not written out
yet but will be in future versions.
- Warn if non-manhattan lines are trying to become pads.
- Allow no-solder paste pads to support fiducials
- Report in mm or mils as selected by user
- Allow reordering of layers
- add some more QFN packages
- fix building with sun studio c compiler
- Made a pcb installation be relocatable.
- Convert the m4 libraries to newlib libraries as part of building a
distfile. The m4 libraries are still considered the sources and as
such are still distributed but this eliminates the need for m4 at
runtime for footprints.
- Got rid of the pcb wrapper script around pcb-bin.
- Remove some old footprints of questionable naming, accuracy, or usefulness.
- Get the autosave/backup code working on all GUI's
- Fix some drill size rounding in the reports
- Changed the backup file name to be derived from the .pcb file name
- Added a command line option for DrawGrid
- Fix logic for adding new ratlines
- Fix gtk grid when board is flipped
- Add "find" and "rip-up" buttons to the netlist window
- Draw plated holes when exporting
- Fix some bugs when converting selection to element
- Fix build on cygwin
- Enhance the win32/build_pcb script used to generate a non-cygwin
windows installer.
- Make pcb work under non-cygwin windows
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
