- Implement new knobs for gems and rake (these are included in
ruby 1.9 distribution already). Also move gem bits from
ruby-gems/Makefile.common to bsd.ruby.mk[1]. Now to depend
on gems or rake you should define USE_RUBYGEMS/USE_RAKE
accordingly. Also RAKE_BIN variable is provided for
pointing to the right rake executable.
- Rewrite RUBY_SCHEBANG in awk to eliminate build dependency
on ruby.
Discussed with: Jonathan Weiss <jw@innerewut.de> [1] (gems maintainer)
Tested by: ports@
bsd.commands.mk and can be easily reused within the infrastructure.
- Revert old DESTDIR implementation.
- Add a new, fully chrooted DESTDIR implementation as bsd.destdir.mk.
Sponsored by: Google Summer of Code 2007
Approved by: portmgr (pav)
- Make RI generation disabled by default (it causes problems
on slow hardware)
- PREFIX-cleaness fixes (in bsd.ruby.mk) [1]
- Take maintainership of bsd.ruby.mk [1]
The patch was tested in the tinderbox with all ruby-dependend ports.
Approved by: portmgr (linimon)
This commit should largele be a NOOP as it only adds support
for DESTDIR undefined. This does allow us to start testing
ports with DESTDIR set, but this is as of yet not supported.
Although this has been extensively tested on pointyhat, this
is a very intrusive change and some cases may have been
overlooked. Please contact Gabor and me if you find any.
PR: 100555
Submitted by: gabor
Sponsored by: Google Summer of Code 2006
forms are retained for compatibility but deprecated [1]
* Add sha256 to CHECKSUM_ALGORITHMS [2]
* Remove some whitespace [2]
* Add USE_SCONS and bsd.scons.mk for the Python-based SCons build system [3]
* Fix USE_LDCONFIG with non-default PREFIX [4]
* Add USE_WX and friends, and bsd.wx.mk, for common code for WxWidgets
support [5]
* Add 'make missing' to show missing dependencies [6]
* Fix DESKTOP_ENTRIES processing on 4.x [7]
PR: 92445 [1], 98206 [2], 98731 [3], 99370 [4], 89398 [5],
93601 [6], 98891 [7]
Submitted by: linimon [1], edwin [2], alex at foxybanana dot com [3],
gerald [4], flz [4], alepulver [5], alex at fafula dot com [6],
shaun [7]
very long and if some dependencies can't be added into the list.
[1]
- Fix FAM support. Make gamin the default FAM system. [2]
- Introduce new 'quicksearch' target to show only port, path and
info section of the matching ports. [3]
- Introduce new category - rubygems. [4]
- Fix stale dependencies while installing qmail slaveport and
another port that depends on qmail. [5]
- Add commentary for describes target in bsd.port.mk. [6]
- Fix warning issued during make index on archs !368. [7]
- Add USE_DOS2UNIX variable. If set to "YES", remove the ^M from
all files under ${WRKSRC}. If set to a string, remove in all files
under ${WRKSRC} with one of these names the ^Ms. [8]
- Add new variables PERL_RUN_DEPENDS and PERL_BUILD_DEPENDS by
checking the existance of the Perl modules with the "perl -e 'use
module;'" command. [9]
- Fix bsd.port.mk variable quoting issues. No quoting is necessary
anymore either in the Makefile or on the command line. Affected
variables include:
BROKEN
FORBIDDEN
IGNORE
MANUAL_PACKAGE_BUILD
NO_CDROM
NO_PACKAGE
RESTRICTED
[10]
- Add NOFETCHFILES variable. If set, don't download these files
from the ${MASTER_SITES} or ${MASTER_SITE_BACKUP} (but do from
${MASTER_SITE_OVERRIDE}). [11]
- Improve 'search' target output. [12]
- Add a new virtual category for Amateur Radio - hamradio. [13]
- Cleanup some old/unused pathes in bsd.port.mk. [14]
- Add @dirrmtry for plists which does the same as:
"@unexec rmdir %D/foo 2>/dev/null || true" [15]
- Remove virtual category - offix. [16]
- Use portsnap instead of cvsup or cvs on "make update" in
/usr/ports. [17]
- Move location of bsd.autotools.mk within bsd.port.mk [18]
- Add bsd.linux-rpm.mk, fix INSTALLS_SHLIB for Linux ports [19]
- Use new USE_RC_SUBR format for FreeBSD version >= 700007 [20]
- Replace the string "FreeBSD" by "The FreeBSD Project" in the
security warning [21]
- Add bsd.local.mk for local modification to ports framework. [22]
- Replace rcNG spelling by rc.d [23]
- Remove superfluous USE_REINPLACE. [24]
Special thanks to: linimon for spending hours with all these patches
clement for fixes
kris for help with pointyhat
PR: ports/86310 [1], ports/89498 [2], ports/83530 [3],
ports/83789 [4], ports/84053 [5], ports/86281 [6],
ports/87214 [7], ports/87234 [8], ports/87318 [9],
ports/87396 [10], ports/87605 [11], ports/87840 [12],
ports/88230 [13], ports/88493 [14], ports/88711 [15],
ports/88751 [16], ports/89281 [17], ports/89999 [18],
ports/90031 [19], ports/90150 [20], ports/90668 [21],
ports/91433 [23], ports/88754 [24]
Submitted by: mi [1], marcus [2], Lars Engels <lars.engels@0x20.net> [3],
pav [4, 16, 20, 24], garga [5], cperciva [6], vd [7],
edwin [8, 9, 11, 15, 21],
fenner [10], Arseny Nasokin <tarc.po.cs.msu.su@tarc.po.cs.msu.su> [12],
Carl Makin <carl@stagecraft.cx> [13], arved [14],
NIIMI Satoshi <sa2c@sa2c.net> [17], thierry [18],
jylefort [19], linimon [22], dougb [23]
- Change LOCALBASE with _RUBY_BASE
- Set _RUBY_BASE=PREFIX if defined _RUBY_PORT_TEST
_RUBY_BASE=LOCALBASE otherwise for easy ports testing.
lang/ruby18:
- Update to 1.8.3
Grant maintainership to submitter.
While I'm here:
- Add _RUBY_PORT_TEST=yes to lang/ruby16 port too.
(lang/ruby1[68] must set it for right install).
PR: ports/87332
Submitted by: Alexander Novitsky
dropped and the lang/ruby16_r and lang/ruby18_r ports have been
removed, since no one seems to appreciate the partially working
solution.
Good news is that the pthread support of lang/ruby18 is now enabled by
default for newer systems, which means the ruby interpreter is linked
with libpthread. This will allow threaded extension libraries to run
and work properly on those systems.
The --march=cputype flag is disabled because it gets ruby to
malfunction and fail to build. I don't know if the problem is in
libpthread or in gcc.
(It really makes me wonder if they had actually tested before asking
me to do this somewhat risky change ;-)
* Please upgrade sysutils/portupgrade prior to this one, or pkgdb(1)
may coredump with a double free() problem from a misuse of the DL
module. In that case, reinstall sysutils/portupgrade manually.
Always put a version suffix to the ruby name (no matter if ruby is the
default version) to avoid mess in future.
[Notes for i386 users]
If you are a ruby developer and still want to stick with ruby 1.6 as
default, please add RUBY_DEFAULT_VER=1.6 to /etc/make.conf.
If you are a ruby developer and want to keep ruby 1.6 as default,
please add RUBY_DEFAULT_VER=1.6 to /etc/make.conf. Otherwise, please
run the following series of commands to migrate to ruby 1.8:
1) Reinstall portupgrade manually (and ruby 1.8 will be installed)
pkg_delete portupgrade-\*
(cd /usr/ports/sysutils/portupgrade; make install clean)
2) Reinstall everything that depends on ruby 1.6 (to use ruby 1.8)
portupgrade -fr lang/ruby16
3) Reinstall ruby 1.8 (because the previous step kills symlinks)
portupgrade -f lang/ruby18
4) Deinstall ruby 1.6 stuff (if you are paranoia)
pkg_deinstall -ri lang/ruby16
It turned out that the configure target does not need to be
overridable but just RUBY_ARCH does for those who are to use a
hand-built interpreter with modules from ports.
Hint given from: obrien
Approved by: kris (implicitly), and myself
