<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.
japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything. Just don't hide anything at all
like the textproc/scim configure script does.
multimedia/schroedinger: Apply an upstream patch.
textproc/scim-input-pad: Same as japanese/scim-honoka.
PR: 201922
Approved by: portmgr (antoine)
Exp-run by: antoine
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0
Fix dissapearing cursor in xf86-video-vmware [2]
Stagify all x11@-owned ports
Bump portrevisions for xf86-* ports due to xserver version change.
Fix fallout from updates where needed.
Thanks to: all testersi, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/184684 [1], ports/181385 [2]
Submitted by: Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by: portmgr (bdrewery), core (jhb) [0]
a kwm, zeising production:
MESA 9.1.6
Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first. See UPDATING for details.
PR: ports/181962 [2]
Submitted by: marius [1]
zeising [2]
Exp-run by: bdrewery
Approved by: portmgr (bdrewery)
Thanks to all who helped testing!
This update updates Glib20 to 2.36 and Gtk+ 3.8
* The gio-fam-backend port that used gamin for the GFileMonitor API is gone.
It is replaced by a GIO kqueue implementation developed as part of a NetBSD
GSoC 2011 project by Dimitry Matveev.
* Fix a bug in the glib20 Makefile so it includes -lintl in the glib-2.0
pkgconfig file [1]. This broke static linking and newer binutils.
* Add introspection USE_GNOME component which sets GI_SCANNER_DISABLE_CACHE to
prevent creation of / root/.cache dir. Defaults to build & run depend,
but :build and :run switches available.
* New x11-toolkits/pangox-compat port and companion USE_GNOME component for
pangox support which was removed from the pango port. Add it to ports still
using pangox API.
Exp-run by: bapt@
PR: ports/178958 [1]
Submitted by: emaste@ [1]
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.
This release features commits by avl, ahze, bland, marcus, mezz, and myself.
The FreeBSD GNOME Team would like to thank Anders F Bjorklund for doing the
initual packagekit porting.
And the following contributors & testers for there help with this release:
Eric L. Chen
Vladimir Grebenschikov
Sergio de Almeida Lenzi
DomiX
walder
crsd
Kevin Oberman
Michal Varga
Pavel Plesov
Bapt
kevin
and ITetcu for two exp-run
PR: ports/143852
ports/145347
ports/144980
ports/145830
ports/145511
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
