-------
===> Extracting for qpage-3.2
>> Checksum OK for qpage-3.2.tar.Z.
/usr/bin/tar: archive /usr/ports/distfiles//qpage-3.2.tar.Z EOF not on block boundary
*** Error code 1
Stop.
# make package
>> qpage-3.2.tar.Z doesn't seem to exist on this system.
>> Attempting to fetch from http://www.qpage.org/download/.
Receiving qpage-3.2.tar.Z (149352 bytes): 100%
149357 bytes transfered in 24.5 seconds (5.95 Kbytes/s)
>> Checksum mismatch for qpage-3.2.tar.Z.
Make sure the Makefile and md5 file (/usr/ports/BROKEN/comms/qpage/files/md5)
are up to date. If you want to override this check, type
"make NO_CHECKSUM=yes [other args]".
*** Error code 1
Stop.
#
installs the version of the port that uses shared library number 9 and the
LIBRARY_VERSION set to the default. Normally this is against our policy
(bumping the version number for minor things), however due to the major
problems caused with the upgrade, Satoshi and I decided that this was best.
Approved by: asami
Creating package /usr/ports/packages/All/kdeutils-4.1b.tgz
Registering depends: giflib-3.0 jpeg-6b kdelibs-4.1b qt-1.31.
Creating gzip'd tar ball in '/usr/ports/packages/All/kdeutils-4.1b.tgz'
tar: can't add file share/applnk/Applications/kedit.kdelnk : No such file or directory
tar: can't add file share/apps/kjots/toolbar/OpenBook.xpm : No such file or directory
tar: can't add file share/apps/kjots/toolbar/filedel.xpm : No such file or directory
tar: can't add file share/apps/kljettool/pics/kljetlogo.xpm : No such file or directory
tar: can't add file share/doc/HTML/en/kjots/index.html : No such file or directory
tar: can't add file share/icons/kjots.xpm : No such file or directory
*** Error code 1
===> Patching for conserver-5.21
===> Applying FreeBSD patches for conserver-5.21
No file to patch. Skipping...
2 out of 2 hunks ignored--saving rejects to ./conserver/group.c.rej
*** Error code 2
but aren't in a tk virtual category from
awk -F\| '$9 ~ /tk-/ && $7 !~ /tk/ {print $1}' INDEX
I didn't do anything about the ports which depend on things which depend
on a tk revision. I'd be afraid that the depended-upon port might change
and thus outdate the virtual category in the depender.
(change made on 97dec)
comment from Lars follows:
Included is an updated patch-ab file for hylafax for current that
fixes the busywait that occurred once the fifo_poll() fix went into
the kernel in December.
The symptoms were that faxqetty and faxq would chew up an inordinate
amount of time waiting for input form their FIFOS. Basically the
kernel fix was to make select() return a 1 on EOF (in accordance
with POSIX) and for read() to keep returning 0 on EOF (which is
the state you are in if you open the fifo for reading in non-blocking
mode and there are no writers).
Reviewed by: asami
Submitted by: Lars Fredriksen <lars@fredriks-1.pr.mcs.net>
There is a later version of conserver, but it requires a rather extensive
build environment and set of tools to build it. This version works is
nice and stable though.
kdegames -> games/
kdenetwork -> net/
kdesupport -> converters/
kdeutils -> misc/
(Repository copy already done, dependency path and category name fixups
is being done in this commit.)
(2) Add a virtual category "kde" and add all six (incl. x11/kde{base,lib})
ports.
(3) Make package names follow the convention.
(4) Change "BUILD_DEPENDS=${X11R6}/bin/moc:..." to "...=moc:...".
There is no need to specify the full pathname if the target is an
executable in the standard path. (Actually, as the same port is
specified in LIB_DEPENDS, I think we can completely do away with
this line but since Stefan added this explicitly, I assume there
is a reason for it and left it alone.)
Approved by: se (all but 4)
the import message used when it was imported to ports/misc:
New port, qpage:
QuickPage sends messages to a paging terminal using the SNPP and IXO
(also known as TAP) protocols. It is normally used with no options
other than a recipient and the message text, in which case the message
is sent to the SNPP server where it is submitted to a page queue to be
sent by a separate daemon process.
PR: 4224
Submitted by: Joe Stein <joes@seaport.net>
(1) pkg_* can't handle absolute paths, so use two @cwd's and relative paths
throughout.
(2) pkg_* can't handle FIFOs, so use mkfifo to create it and rm to delete it.
(3) pkg_* can't handle empty directories, so create them with mkdir.
(4) the @mode/@owner/@group directives don't appear to work so use @exec
to set all the modes.
send/receive files over a dial-in serial port. And they do one thing
and only one thing -- transmit files. They don't do file conversions,
they don't do remote commands, or any of that other stuff.
PLISTs.
Note: I know that this is going to break some symlinks and/or .so
includes, I will back some of these out as I run into these during
package building.
(btw, is there a better way to do this than ``cvs co ports'' when all I want
to edit is ports/comms/Makefile? Freefall doesn't have enought space for
a total ports checkout).
lrzsz is derived from the last unrestricted verison of Chuck Forsberg's
rzsz package. lrzsz is covered under the GNU copyleft, so the distribution
file can be included on our CDROM.
See lrzsz's home page at http://www.csl-gmbh.net/~uwe/lrzsz.html.
all the COMMENTs! No package names, no version numbers, no "this is
absolutix-3.1.2" type comments that have zero information contents.
Now, without any bad examples to follow, nobody has an excuse to import
a port with those kind of comments. :)
Phew! 238 ports modified!
service of the Deutsche Telekom.
XCept 2 is freeware (BSD-style copyright), but has later been replaced
by the commercial XCept 3. The authors no longer distribute or support
this old version.
I cannot build it on freefall's 2.1.x system, but it builds fine on my
2.2-current. thud seems to be down...
the user to the "dialer" group instead of making kermit sgid.
Taken from a conversation on the ports list.
Asked by: Andrew MacIntyre <andymac@bullseye.apana.org.au>
Answered by: ache
Install as sgid dialer to make able to remove stale lock files.
Degradate priv_opn function to simple open: we don't need sgid
capabilities to open devices.
lines to an already existing hunk.)
Submitted by: Rob Snow <rsnow@legend.txdirect.net>
I was having a whale of a time getting hylafax to work with seyon.
faxgetty kept cycling DTR whenever I was trying to run seyon. I did a
little poking around and it looks like the LCK..cuaa1 file should have
the PID of the locking process. seyon didn't, it had some garbage in
the lock file. here is the patch to make seyon lock the port with the PID
in the lock file.
does not define INSTALL, so that the one in the source will be
honored.
(2) Change comments about "mv patch-ab patch-ab.mv", that won't work.
It should be "rm patch-ab".
(3) EXEC_DEPENDS now have ghostview, gs and bash.
(4) Compress manpages.
(5) Remove post-clean target, there is no such thing! ("make clean"
will delete the whole work/ subdirectory anyway.)
"EXTRACT_SUFX=-tar.gz" and taking out all the echo's in pre-fetch
that complains how it doesn't work. Reorder some variables, take
out the numerous KEYWORD lines, etc.
This port is still broken rather badly. For starters, there are 17
chunks of failing patches.
A new import based on Sam Leffler's Hylafax V3.0pl0. Flexfax is now obsolete.
Import includes & applies the base patch Sam posted on the flexfax mail list
(mail list is still called flexfax, though the package is called Hylafax).
Sam declared our ports/comms/flexfax to be obsolete (over a year old).
Sometime after the CD release, I will post a proposal to remove
ports/comms/flexfax.
I will maintain ports/comms/hylafax as I need fax capability.
Thanks to Asami Satoshi for suggested improvements,
I leave him to `bless' this port by adding the final
comms/Makefile: SUBDIR += hylafax
Until he does that, any mistakes I may have made shouldnt break any makes :-)
I've undoubtedly screwed something up, somewhere, its a big port (30M inc bins),please test, Oh... and "Share & Enjoy" :-)
---
Julian Stacey <jhs@freebsd.org> Tel. +49 89 268616. Fax Modem: 2608126
http://www.regent.e-technik.tu-muenchen.de/people/jhs.html
=====
# Id line
#
# RESTRICTED: restricted_port_1 (comment1)
# RESTRICTED: restricted_port_2 (comment2)
#
# BROKEN: broken_port_3 (comment3)
# BROKEN: broken_port_4 (comment4)
# BROKEN: broken_port_5 (comment5)
#
SUBDIR= good_port_1 good_port_2 ...
=====
Basically, the idea is to make it easy to find restricted or broken
ports by doing a "grep".
