- http://www.harsch.net/Ghostscript/ghostscript.html
- driver is based on Uli Wortmann's HO DJ850 driver
- supports duplex printing
Note from the author: in duplex mode black is not so intensive as
in normal mode. Maybe HP wants to prevent, that you don't see the
black of the other side of the page too much.
If somebody knows HP's algorithm, how to reduce the black, then
author would try to compensate it with some code...
my dual PIII-700 trying to figure out the sizes of the
primary and secondary caches. The sizes turned out to be
rather wrong (definetly true for the L2 cache, may be L1
is indeed 32Kb). Their algorithm seems bogus to me, but
most importantly, the obtained values are NOT USED
anywhere in the GhostScript code... One of the submitted
patches rips the "cache size" section from the genarch
entirely.
The attached modification and new patches also:
. replace the use of mktemp/fopen with mkstemp/fdopen
. modify the unix-gcc.mak so that there is no need for
GNU-make
PR: 20038
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
reduce alignment problems. It is only slightly slower, but produces much
nicer print.
- Added $Id$
Obtained from: Harold Bower <HalBower@worldnet.att.net>
an enhanced PCL3 (PCL3+) driver
that was part of gs5 port and got lost in gs55 port.
Now it reappears in gs 6.01 ;-)
ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/pcl3.html
- make configure script work (Louis)
- make configure.batch script work (Andreas)
- extract contributed HP8XX driver in ${WRKSRC}/src
- make png driver compile (add $(PREFIX)/include to XINCLUDE variable)
Dunno, if this will be the last round of cleanups...
Submitted by: "Louis A. Mamakos" <louie@TransSys.COM>
Before the new patch gs build fine, but didn't
include the printer devices included with configuration script.
After fixing this it refuses to build.
Any help appreciated.
Now you have the last version as I to help me to fix the mess.
Sorry folks ...
additional changes by me:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
printer: Epson Stylus Color 740
mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
#
printer: Epson LQ-1170
mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
release
- apsfilter will be updated later
Submitted by: "Alec Wolman" <wolman@cs.washington.edu>
FWIW, checkout of these things took 5+hrs, staying on the local
.freebsd.org net w/o hitting the 'net at all.
As promised,
$ time cvs ci
real 67m51.701s
user 0m1.250s
sys 0m5.345s
- Since the author decided to put a version number into his archive,
we can now safely fetch the file from his site.
- patch-ad is useless now
- updated the configure and configure.batch script, to show all possible
drivers
- install hp850 drivers license and readme file in the gs doc dir
- update the DESCR file, mention the two add on packages in this port
- The new driver supports the following additional printers:
Support for HP DeskJet 670, 690, 850, 855, 870, 890, 1100 and 1600,
See announcement on http://bonk.ethz.ch/hp850/hp850.html
Please note, that some of the drivers have certain restrictions
and produce huge output files ... Please read the release notes !!!
The author makes suggestions on his website, what driver to choose
if you need a fast printout, see
http://bonk.ethz.ch/hp850/hp850-readme.1.3.html
