TrueType fonts from working.
- A file cidfmap now includes entries for Ryumin-Light and
GothicBBB-Medium. They points japanese/kochi-ttfonts by default
(but this port does not depend on it).
Approved by: linimon (mentor)
Take measures to cope with too frequent update (without version numbering)
of Samsung-SmartGDI driver
PR: 54707
Submitted by: KATO Tsuguru <tkato@prontomail.com>
- Fix build on -current
- Fix checksum of gdevdj9.c.gz (again)
- Get much improved ps2epsi stuff from ghostscript-gnu version
PR: 37500
Submitted by: Ports Fury
Modifications against PR are:
o $MASTER_SITES substitution.
o Typo in scripts/configure.
PR: ports/36673
Submitted by: KATO Tsuguru <tkato@prontomail.com>
Modifications against PR are:
o $MASTER_SITES substitution.
o Typo in scripts/configure.
I don't know why $MLINKS entries are not in generated plist...
PR: ports/36673
Submitted by: KATO Tsuguru <tkato@prontomail.com>
- Important fix, therefore PORTREVISION bumped.
background info: hpijs currently may not compiled with -O or -O2.
Simply leaving out any optimization (like it was default in prior
hpijs versions) cures the problem.
Many thanks to David Suffield from HP-Vancouver.
- deploy DATADIR/DOCSDIR
- don't use internal .mk work variables, rely on supported
ones
_DISTDIR -> DISTDIR/DIST_SUBDIR
o use <machine/endian.h> for checking byte order instead of an
ARCH check
PR: 31077
Submitted by: KATO Tsuguru <tkato@prontomail.com>
- therefore bump port revision
- add a makefile template, so that it will be compiled in
- patch configure.batch and the interactive one
interactive configuration is still not enabled, because every
driver entry needs to be checked thoroughly if its still present,
if more printer models are supported, if there are new printers/drivers,
etc ... This needs time that I currently don't have.
Any taker ???
or depend on the X11 libraries, if it is set.
This should allow "make release" to work happily with the documentation
build again.
Approved by: andreas (MAINTAINER)
high quality drivers for Epsons, HPs, ...
- bumped port revision
- modified all target and added a makefile component to build
tool from stp driver (escputil) to do maintenance on epsons
install manpage as well
- variable name changes, new scheme sounds better
- use variables as often as possible in all make targets
to reduce port maintenance as much as possible
- fix two copy and paste mistakes in echo messages
- updated pkg_plist, tested port and package building
as well as removal
- modified configure.batch to build stp driver
- removed port revision, because of new version
- added PCL3 driver (hpdj successor) from Martin Lottermoser
*both* driver, HPDJ and PCL3, are now compiled in
reason: PCL3 is still flagged as BETA and author didn't get much response
Although Martin says, its definitively not ALPHA, its safer to have the
old drivers around, if things fail for some reason.
Martin confirmed, that its possible to have both in one gs binary !!!
- disable configure script temporarily, since dialog needs a driver update
but I don't want to hold back that port any longer.
- enabled as many gs driver as possible
- reorganized MASTER_SITES
- added mirrors
- add a note, that russion mirror isn't up to date, so don't add it
- optimized downloading from 6 different sources by special ordering
- reorganized Makefile completely
- put only ${GS_SOURCES} into EXTRACT_ONLY variable
unpacking other 3rd party src's is handled in post-extract target
- directory creating, patching, unpacking and install actions are
now handeled within the proper make target. This makes port maintenance
much easier, i.e.: if you enter make extract, then only extraction
of things happen, but makefiles are still not patched. Before this
cleanup, things were not so structured and not easy to maintain.
Maybe we get a configure script later, to choose between different
3rd party driver options, then this "sorting" and documenting
will support the migration process...
- silence port by hiding actions with "@"
- insert many informational echoes. This makes port maintenance and
troubleshooting easier
- put more unique comments in front of the different 3rd party modules
- document things better
- use as many environment variables as necessary, so that "numerical"
changes only have to happen on some places and not withing make targets
- use gs version number also in docu directory
- properly install runtime, info and doc files from 3rd party drivers
- put not needed stuff into "NOPORTDOCS" section
- keep old font names to avoid fetching unnecessary things
- updated patches as necessary
- added new patch from Nartin Lottermoser
- removed 2 patches that have been incorporated into gs 6.50
- added needed manual pages
- updated pkg-plist
- finally tested port and package building as well as port removal
new port passes all disciplines ;-)
- http://www.harsch.net/Ghostscript/ghostscript.html
- driver is based on Uli Wortmann's HO DJ850 driver
- supports duplex printing
Note from the author: in duplex mode black is not so intensive as
in normal mode. Maybe HP wants to prevent, that you don't see the
black of the other side of the page too much.
If somebody knows HP's algorithm, how to reduce the black, then
author would try to compensate it with some code...
my dual PIII-700 trying to figure out the sizes of the
primary and secondary caches. The sizes turned out to be
rather wrong (definetly true for the L2 cache, may be L1
is indeed 32Kb). Their algorithm seems bogus to me, but
most importantly, the obtained values are NOT USED
anywhere in the GhostScript code... One of the submitted
patches rips the "cache size" section from the genarch
entirely.
The attached modification and new patches also:
. replace the use of mktemp/fopen with mkstemp/fdopen
. modify the unix-gcc.mak so that there is no need for
GNU-make
PR: 20038
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
reduce alignment problems. It is only slightly slower, but produces much
nicer print.
- Added $Id$
Obtained from: Harold Bower <HalBower@worldnet.att.net>
- make configure script work (Louis)
- make configure.batch script work (Andreas)
- extract contributed HP8XX driver in ${WRKSRC}/src
- make png driver compile (add $(PREFIX)/include to XINCLUDE variable)
Dunno, if this will be the last round of cleanups...
Submitted by: "Louis A. Mamakos" <louie@TransSys.COM>
Before the new patch gs build fine, but didn't
include the printer devices included with configuration script.
After fixing this it refuses to build.
Any help appreciated.
Now you have the last version as I to help me to fix the mess.
Sorry folks ...
additional changes by me:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
printer: Epson Stylus Color 740
mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
#
printer: Epson LQ-1170
mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
release
- apsfilter will be updated later
Submitted by: "Alec Wolman" <wolman@cs.washington.edu>
- Since the author decided to put a version number into his archive,
we can now safely fetch the file from his site.
- patch-ad is useless now
- updated the configure and configure.batch script, to show all possible
drivers
- install hp850 drivers license and readme file in the gs doc dir
- update the DESCR file, mention the two add on packages in this port
- The new driver supports the following additional printers:
Support for HP DeskJet 670, 690, 850, 855, 870, 890, 1100 and 1600,
See announcement on http://bonk.ethz.ch/hp850/hp850.html
Please note, that some of the drivers have certain restrictions
and produce huge output files ... Please read the release notes !!!
The author makes suggestions on his website, what driver to choose
if you need a fast printout, see
http://bonk.ethz.ch/hp850/hp850-readme.1.3.html
Makefile:
- Changed WRKSRC
- New GS_SOURCES
- Make symbolic link from jpeg-6a and libpng port's workdir into
WRKSRC, instead of patching unix-gcc.mak further:
ln -s ${PORTSDIR}/graphics/jpeg/work/jpeg-6a ${WRKSRC}/jpeg-6a
ln -s ${PORTSDIR}/graphics/png/work/libpng-0.96 ${WRKSRC}/libpng
- updated md5 files
patches/patch-aa:
- new unified diff because some of the above mentioned changes
- Only commented out the default DEVICE_DEVS
- make our zlib compile again
pkg/DESCR:
- bumped version number
pkg/PLIST:
- updated PLIST
- added proper @dirrm's for a successfull pkg_delete action
scripts/configure:
- added new drivers
"la70t" "DEC LA70 printer with low resol. text enhancement" ON \
"lq850" "EPSON LQ-850 (360x360), ok for Canon BJ300 in LQ850 emul" ON \
- rmoved one unnecessary "pdfwrite"
- same for scripts/configure.batch
As requested by: Lars Koeller ;-)
