Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
HEADS UP: See UPDATING for changes affecting your upgrade.
New installs not affected.
This patch adds a new rc_variable: librenms_daemonflags
The -T option is gone as that will force a log to syslog, doubling up on log
entries.
A new APP_LOG setting has been added to the .env file. Please update and
move your logs. See UPDATING.
PR: 246598
Submitted by: Dries Michiels <driesm.michiels@gmail.com>
instead of from /etc.
Document this change in UPDATING and provide a migration strategy.
PR: 247934 (based on)
Submitted by: Michael Osipov <michael.osipov@siemens.com>
There are some reports about PHP crashes, when using php-imap
(especially with OpenSSL and TSL 1.3). All this problems went away,
when using the panda-cclient instead of the old cclient.
Therefore we make the panda-cclient the new default,
but still allow cclient in order to allow backwards compatibility.
Special thanks to bofh for figuring out the complex details and
the solution!
Special thanks to Jason for being patience and
helpful about so many months!
Reported by: Jason de Cordoba <jason@aventia.pw>
Reviewed by: bofh
Sponsored by: Bounce Experts
Give time to users to change their env
The new port is the successor, it supports milter feature and its
config file is in another path.
PR: 244424
Submitted by: Yasuhiro KIMURA <yasu@utahime.org> (maintainer)
Update converters/libiconv to 1.16.
This update removes the extra patches for CP932 and EUCJP-MS, as they are
not compatible with this release.
Add an UPDATING entry for this change.
ABI/API stable, no need to bump dependent ports:
https://abi-laboratory.pro/index.php?view=timeline&l=libiconv
PR: 240954
Submitted by: Yuichiro NAITO
Exp-run by: antoine
Approved by: maintainer timeout (gnome@)
PORTVERSIONs are the dates of the latest commits on the respective
stable branches.
Deprecate devel/libphutil, as all of its functionality has
been moved into arcanist and phabricator by upstream and
the library has been fully deprecated.
- Update to 0.0.20190416
- Make portclippy happy
- Provide instructions to prevent pidgin from being autoremoved during update
PR: 244924
Submitted by: tobias.rehbein@web.de
Approved by: mizhka@gmail.com (maintainer), ehaupt (mentor)
Two new options
* PYPOLLER - default, deprecated, needs Python 2.7
* PYSERVICE - Dispatcher service, recompile required
HEADS UP HEADS UP
Polling via cron job is now deprecated. Please use the Dispatcher.
LibreNMS will be dropping support for PHP 7.1 and Python 2 in the next release
expected May 31 2020. see https://community.librenms.org/t/dropping-support-for-php-7-1-and-python-2/11851
Your existing crontab entries for the PYPOLLER option will be going away.
You can migrate to the PYSERVICE option of LibreNMS now.
PR: 246105
Submitted by: Dries Michiels <driesm.michiels@gmail.com>
- Create sysutils/ansible28 from sysutils/ansible
- Set EXPIRATION_DATE to 20200530 for ansible23 ansible24 ansible25 and
ansible26 as they are no longer maintained by upstream
- Bump ansible23 ansible24 ansible25 ansible26 and ansible27 for CONFLICTS
with ansible28
PR: 241734
Submitted by: ncrogers@gmail.com
Approved by: portmgr (maintainer-timeout)
- Change LICENSE to BSD2CLAUSE from BSD4CLAUSE
- Utilizes UID and GID irrd for 252
- Take MAINTAINERSHIP
- Mentioned in UPDATING
- Both irrd-legacy and irrd can bes installed and run concurrently
Approved by: ume (private mail)
Fontconfig 2.13.1 generated .uuid files in the fonts directory which where
not properly registered to the packages. To clean them up, please execute the
following command:
find %%LOCALBASE%%/share/fonts -type f -name .uuid -delete
By switching to this RC, the dependency on libuuid can be droped again, and the
issue of registering uuid is moot.
PR: 239167
Exp-run by: antoine
Submitted by: lightside <lightside@gmx.com>
MFH: 2020Q2
x11/libxkbcommon was switched to use evdev rules in r528813, but FreeBSD 11
still needs the legacy rules. Switch back to the legacy rules, but only on
FreeBSD 11.
Adjust the UPDATING entry to indicate that the switch to evdev rules by
default is only on FreeBSD 12 and later, and that FreeBSD 11 still uses the
legacy rules.
- qca-2.3 drop support for OSSL<1.1
- copy devel/qca to devel/qca-legacy which is held at the current version
- update devel/qca to 2.3
- Add Uses/qca.mk which handles dependency on either of the ports depending on
the FreeBSD version
Users on FreeBSD11 must therefore change their pkg orign à la:
pkg set -o devel/qca:devel/qca-legacy
PR: 244682
Exp-run by: antoine
Reviewed by: arrowd
Differential Revision: https://reviews.freebsd.org/D24042
Switch x11/libxkbcommon to use evdev rules rather than legacy rules by
default, to improve support for keyboards when using evdev.
For users using the legacy configuration, or running xorg on FreeBSD 11,
please consult UPDATING for instructions in case of issues.
PR: 244354 [1]
Submitted by: jbeich (fix)
Reported by: Patricio Villar [1]
Differential Revision: https://reviews.freebsd.org/D23860
Change the default mesa configuration to use DRI3 rather than the older DRI2
interface. This should improve performance somewhat, and alleviates the need
for the FIXDRM option in x11-servers/xorg-server.
Remove the FIXDRM option from x11-servers/xorg-server.
Add an UPDATING entry for the change.
For users of graphics/drm-legacy-kmod or the base graphics drivers, this might
cause regressions. If you experience problems when running OpenGL applications
please force the use of the DRI2 backend by setting the LIBGL_DRI3_DISABLE
environment variable to 1 before starting any OpenGL application. This is
easiest done by adding it to your shell startup file or .xinitrc.
Add UPDATING entry for xorg-server, detailing the change of device
configuration backend.
PR: 196678, 244306 (for tracking)
- Use Lua 5.2 and drop support for the dead LuaJIT.
- Explicitly state all required configure options
as the "freebsd" preset has some of them wrong.
- Do not install the example certs as they clutter the
config directory and nobody should ever use them.
They can be recreated with prosodyctl if needed.
- Remove the broken "daemonize" option from the rc script,
handle all actions with "prosodyctl" instead.
- Change data directory from /usr/local/var/lib/prosody to
/var/db/prosody and include instructions in UPDATING
- Install the prosody migrator
- Use arc4random
PR: 241619
Submitted by: thomas@beingboiled.info
Reviewed by: lx (maintainer), Sascha Biberhofer <ports@skyforge.at>
Approved by: lx (maintainer timeout)
* Remove the "post-patch" target because the "requirements.txt" is only used
for installations via devel/py-pip.
Notable changes since 2.6.12:
* Bulk import of device components via CSV files
* External file storage support (FTP, S3, SFTP, etc.)
* Rack elevations rendered by SVG (= Scalable Vector Graphics)
* Separate configuration for Webhooks and Cache databases via Redis
* Add ability to clone objects (pre-populate form fields)
* Toggle config context display between JSON and YAML
* Add support for Redis Sentinel
* Further cable and port types
* Many other enhancements and bugfixes
https://github.com/netbox-community/netbox/blob/v2.7.7/docs/release-notes/version-2.7.md
Improve the xorg-server entry a bit, add a note about needing
xf86-input-libinput and x11/libinput, since they seem to not always be
installed when people have custom configs or options.
