After FreeBSD 12.0 EOL we no longer have to worry about LLD 6 and
can drop LLD_UNSAFE from openal-soft ports. LLD can link them fine
now but some ports needs a little help on i386 (-Wl,-znotext).
PR: 226980
Reviewed by: jbeich (earlier version)
Differential Revision: https://reviews.freebsd.org/D23030
In file included from rts/System/Sound/OpenAL/Sound.cpp:7:
/usr/local/include/AL/alc.h:34:16: error: typedef 'ALCdevice' cannot be referenced with a struct specifier
typedef struct ALCdevice ALCdevice;
^
rts/System/Sound/OpenAL/Sound.h:23:33: note: declared here
typedef struct ALCdevice_struct ALCdevice;
^
1 error generated.
http://beefy6.nyi.freebsd.org/data/120amd64-default/518685/logs/errors/spring-98.0_19.log
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
CMake Error at /usr/local/share/cmake/Modules/FindBoost.cmake:2049 (message):
Unable to find the requested Boost libraries.
Boost version: 1.69.0
Boost include path: /usr/local/include
Could not find the following Boost libraries:
boost_signals
Some (but not all) of the required Boost libraries were found. You may
need to install these additional Boost libraries. Alternatively, set
BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT
to the location of Boost.
Call Stack (most recent call first):
CMakeLists.txt:245 (FIND_PACKAGE)
PR: 232525
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
file(GLOB .. FOLLOW_SYMLINKS ..) was never documented to work; in
3.12-rc1 this has become an error. That in itself is considered
a regression in CMake [1], but the use is wrong anyway, so patch
it away. The change has been accepted upstream [2] already.
Not bumping PORTREVISION because no code actually changes,
it just removes a cmake-time no-op.
[1] https://gitlab.kitware.com/cmake/cmake/issues/18097
[2] https://springrts.com/mantis/view.php?id=6005
PR: 229101
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D15878
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
You can now `make test' on any port to run test sequence, no-op by default.
If a port defines TEST_TARGET, it'll run sub-make with specified target,
usually `check' or `test', useful if upstream supports that. The port may
instead define custom do-test target, as well as usual satellite targets:
{pre,do,post}-test, {pre,do,post}-test-OPT, {pre,do,post}-test-OPT-off
`make test' builds and stages port first, so test may use both WRKDIR and
STAGEDIR, and both BUILD and RUN depends are available for test target.
Additionally, TEST_DEPENDS is now properly supported and may be used to
define additional depends specifically for testing.
Framework may define default tests for specific cases. For instance,
perl5.mk and cran.mk already provide default test target on their own.
This commit also converts my ports which have tests to this new framework.
Approved by: portmgr (bapt)
Differential Revision: D3680
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version. When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.
Also remove the devel/pcre dependency from USE_GNOME=glib20. It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it. The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20. Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.
PR: 195724
Exp-run by: antoine
Approved by: portmgr (antoine)
The 3.0 series is an incremental improvement over the previous 2.8 series
despite the major version number change. A list of important changes is
available at http://www.cmake.org/cmake/help/v3.0/release/3.0.0.html
On the porting side
* The minimum FreeBSD release we have to support in the ports tree is now
recent enough that ports/168671 can finally be committed: instead of
building and using CMake's own copies of bzip2, curl, expat, libarchive,
liblzma and zlib, we use the versions in ports and/or the base system.
* CMake's documentation system has been changed and vastly improved at the
cost of now depending on Sphinx. We still generate only man pages, but can
start generating the HTML documentation in the future if desired.
* devel/cmake-gui now uses Qt5 instead of Qt4 and does not needlessly build
the ncurses UI that is installed by devel/cmake itself.
* CMake commit 3816cd2 fixes a longstanding issue in the detection of the
Python interpreter and its libraries, but requires us to revert a
workaround for that in Mk/Uses/python.mk itself, effectively reverting
the patch introduced by ports/168159.
* Similarly, a few ports had to be fixed manually due to CMake being
stricter when parsing some files or the ports detecting Python the wrong
way. Fortunately, they all had been fixed upstream so I just grabbed the
appropriate commits and pointed to them in the patches.
science/gnudatalanguage had to have its PORTREVISION bumped because
switching to USES=cmake:outsource removed a few files from the plist that
were not supposed to have been installed in the first place.
PR: 168671
PR: 192644
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
