Chuck Robey
8be69f435d
Unbreak moscow_ml.
...
Obtained from: partially, from Jens Gerlach Christensen (vepjan@image.dk )
2000-01-21 22:32:29 +00:00
John Polstra
fe7fa4a89d
Use byacc instead of bison.
2000-01-21 05:14:21 +00:00
Munechika SUMIKAWA
e28c1fb465
Add 'ipv6' on CATEGORIES.
2000-01-18 12:34:34 +00:00
Thomas Gellekum
207ad0ba66
Oops, forgot to update the checksum file.
2000-01-18 09:22:38 +00:00
Thomas Gellekum
a92be2a764
On second thought, put back DIST_SUBDIR. It's not only used for the
...
Python distribution but also for the docs and some other packages with
rather generic names.
2000-01-18 09:21:18 +00:00
David E. O'Brien
19b929d5e3
Upgrade to the 2000-01-10 GCC 2.96 development snapshot.
2000-01-17 12:27:59 +00:00
R. Imura
a3b7d0c16a
Update version to 5d2.
...
PR: 15917
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
2000-01-14 17:19:33 +00:00
R. Imura
cbf4ddb7b0
- Merge scripts/configure into Makefile
...
- Support install macros
PR: 15916
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
CVg: Obtained from: Fill this in if the change is from third party software.
2000-01-14 17:09:03 +00:00
R. Imura
b9ec16f737
- Merge scripts/configure into Makefile
...
- Add WWW: line of pkg/DESCR
PR: 15915
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
2000-01-14 16:34:17 +00:00
Munechika SUMIKAWA
66082ac2d0
- Support IPv6.
...
- remove DIST_SUBDIR since there are 2 distfiles on this port anymore.
Reviewed by: tg(maintainer)
2000-01-13 13:28:10 +00:00
Munechika SUMIKAWA
64b404dcf3
Support IPv6
...
Approved by: maintainer
2000-01-12 19:16:43 +00:00
Thomas Gellekum
dbad51556d
s/X11_BASE/X11BASE/.
2000-01-10 13:13:49 +00:00
Chuck Robey
5b3ed76a03
Update objc to version 3.1.5
2000-01-10 06:31:26 +00:00
Yukihiro Nakai
0e32301528
Fix about PLIST and i18n.
...
Submitted by: Youichi Asai <yatt@gnome.gr.jp>
2000-01-09 08:05:34 +00:00
Satoshi Asami
2ca1fe047a
Don't include bsd.port.pre.mk twice. This usually is caused by first
...
including bsd.port.pre.mk and then later including bsd.port.mk (the
latter of which of course should be bsd.port.post.mk).
2000-01-07 16:40:17 +00:00
Yukihiro Nakai
6b0ea0d8a6
Change MAINTAINER address from nacai@iname.com
...
to nakai@FreeBSD.org
2000-01-07 02:27:48 +00:00
Chris D. Faulhaber
99a03ff051
Fix configure under 3.x when autoconf is not installed
...
Found by: bento
2000-01-07 00:09:18 +00:00
Thomas Gellekum
07223f8dda
- Install python-mode.el.
...
PR: 15702
Submitted by: "Dmitry S. Sivachenko" <dima@Chg.RU>
- Only use Tk support if X11 is installed.
PR: 15910
Submitted by: Nathan Dorfman <nathan@rtfm.net>
2000-01-06 11:46:19 +00:00
Joseph Koshy
280179a272
Update breakage caused by new visibility in -current of lchown(2)
...
in <sys/stat.h>.
2000-01-06 09:29:10 +00:00
Justin M. Seger
30593878f3
Upgrade repo copy of tcl82->tcl83 to tcl 8.3.b1
2000-01-05 18:33:13 +00:00
Justin M. Seger
fa786a57ac
Upgrade to tcl 8.2.3
2000-01-05 07:11:54 +00:00
Satoshi Asami
f0759d6bad
Add USE_XLIB.
...
Submitted by: bento
2000-01-03 11:43:33 +00:00
Vanilla I. Shu
f982342730
Upgrade to 2.61.
2000-01-02 13:52:21 +00:00
Steve Price
55b1912df8
Update to version 6.1.0.
...
PR: 15791
Submitted by: maintainer
1999-12-31 20:34:37 +00:00
Joseph Koshy
0ee98b85e1
Change CATEGORIES to 'lang elisp' to match current location.
1999-12-30 01:36:39 +00:00
Steve Price
e628032176
Adding cu-prolog version 3.94.
...
An Experimental constraint logic programming language.
PR: 12536
Submitted by: Issei Suzuki <issei@jp.FreeBSD.ORG>
1999-12-29 09:19:39 +00:00
Steve Price
523269e5e1
Moving the starlogo port from java to lang.
1999-12-29 07:30:48 +00:00
Tim Vanderhoek
8cd82c0318
General comment cleanups.
1999-12-28 16:30:10 +00:00
Tim Vanderhoek
00bd212eb1
Add two missing files.
1999-12-28 15:41:16 +00:00
Steve Price
81a6313344
Update to version 1.6.2.
...
PR: 15712
Submitted by: maintainer
1999-12-27 21:43:34 +00:00
Steve Price
9a20ef173c
Thanks to a repository copy (by Satoshi) of pkg/INSTALL.{tcl,wi}sh
...
from the 8.0.x version of these ports, we are now one step closer to
finally being rid of them.
1999-12-27 15:55:07 +00:00
Joseph Koshy
3156d7a097
"ports/devel/sml-mode.el" being moved to "ports/lang/sml-mode.el".
1999-12-27 09:41:33 +00:00
Joseph Koshy
db0d50c80e
Re-import sml-mode.el under "ports/lang".
...
Old log message: "SML-mode v3.3 from Matthew J. Morley. A useful
EMACS mode for interacting with a Standard ML system."
Requested by: Satoshi Asami <asami@freebsd.org>
1999-12-27 09:32:50 +00:00
Steve Price
119254c786
Adding yabasic version 2.60.
...
Yet another Basic for Unix and Windows.
PR: 15016
Submitted by: Frank Gruender <elwood@mc5sys.in-berlin.de>
1999-12-25 15:09:02 +00:00
Steve Price
b3b478f4db
Allow the value of CC to be overridden.
...
PR: 15473
Submitted by: Jame Andariese <james@ja.ath.cx>
1999-12-25 01:54:08 +00:00
Michael Haro
332b0f4a83
remove --prefix=${PREFIX} when GNU_CONFIGURE=yes and other minor cleanups
...
PR: 14759
Submitted by: Jeremy Lea <reg@shale.csir.co.za>
1999-12-24 18:39:48 +00:00
Yukihiro Nakai
09af3f3985
Update to 0.9
...
PR: ports/15563
Submitted by: Rod Taylor rod@zort.on.ca
1999-12-24 11:07:33 +00:00
Steve Price
f6e046c3ac
Update to version 3.33.
...
PR: 15583
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
1999-12-24 04:45:58 +00:00
Steve Price
69d9b11b24
* Rearranged configure target.
...
PR: 15584
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
1999-12-24 04:43:29 +00:00
Steve Price
3c6d9f6a34
Update to version 1.4.3.
...
PR: 15591
Submitted by: maintainer
1999-12-24 04:32:34 +00:00
Steve Price
3f3ee682a8
Update to version 1.4.3.
...
PR: 15590
Submitted by: maintainer
1999-12-24 04:30:36 +00:00
Steve Price
a42efa8240
Allow the value of CC to be overridden.
...
PR: 15397
Submitted by: James Andariese <james@ja.ath.cx>
1999-12-23 18:50:24 +00:00
John Polstra
9dfe6b8bdd
Fix breakage caused by the recent socklen_t changes in -current.
...
Modula-3 and CVSup build and work again under -current now.
PR: ports/15595
1999-12-23 17:34:59 +00:00
John Polstra
42cd159a01
Fix the Modula-3 runtime so it will work with the new larger
...
sigset_t types in -current.
1999-12-23 17:31:15 +00:00
Steve Price
13197d8bbb
Update to version 2.0.2.
...
PR: 15253
Submitted by: maintainer
1999-12-23 16:34:40 +00:00
Jean-Marc Zucconi
76ef98be9f
Obey the CFLAGS settings.
...
fix time_t declarations.
Submitted by: Pedro F. Giffuni <pfgiffun@bachue.usc.unal.edu.co>
1999-12-22 21:38:13 +00:00
Sheldon Hearn
8ec5cad52c
Hand over to a maintainer with more time available, now that James has
...
retired from active service.
Bump "Version required" while I'm in there.
Requested by: Alexander Langer <alex@big.endian.de>
1999-12-22 10:31:12 +00:00
Satoshi Asami
ec72c83800
Fix problem that could cause cvsup to abort in some cases.
...
Submitted by: jdp
1999-12-16 08:11:01 +00:00
Seiichirou Hiraoka
815e42a695
Fix md5 checksum
...
Pointed out by: s974123@cc.matsuyama-u.ac.jp
1999-12-10 20:14:34 +00:00
Seiichirou Hiraoka
6a526e3d1f
Fix md5 checksum
...
Pointed out by: s974123@cc.matsuyama-u.ac.jp
1999-12-10 19:20:36 +00:00
Daniel Eischen
d3cb95a429
Correct the checksum for the bootstrap compiler which I somehow broke
...
when the port was upgraded.
Found by: Bento's error logs
1999-12-10 16:06:36 +00:00
Jean-Marc Zucconi
c7fd2bdede
Activate p5-F77
1999-12-07 21:19:30 +00:00
Jean-Marc Zucconi
320e5ece09
Tells you how to link C programs with Fortran subroutines.
...
Required by the new pgperl version.
1999-12-07 21:17:41 +00:00
Matthew Hunt
e40b9e72f6
Upgrade to 0.19.
...
PR: 14635
Submitted by: saper@system.pl
1999-12-06 20:35:53 +00:00
Andreas Klemm
f893b4f6b3
I think I forgot to add these...
...
Submitted by: dirk.meyer@dinoex.sub.org (Dirk Meyer)
1999-12-04 10:07:10 +00:00
Yukihiro Nakai
74b6d035fc
Update to 0.8
1999-12-02 06:47:52 +00:00
Justin M. Seger
8762f71b08
Re-enable readline support
1999-12-01 05:21:30 +00:00
David E. O'Brien
76b0284dc5
Update to the Jun 20, 1999 fixes.
1999-11-29 10:14:16 +00:00
Justin M. Seger
c9eab95841
Guile shared lib version changed
1999-11-29 02:37:54 +00:00
Justin M. Seger
968f124d0f
Upgrade to guile-1.3.4
1999-11-29 02:37:14 +00:00
Steve Price
bc087374d3
Update to use Tcl/Tk version 8.2.
...
Submitted by: Ade Lovett <ade@lovett.com>
1999-11-28 18:32:45 +00:00
Steve Price
da405f1887
Add USE_XLIB=yes since this port needs X libraries to work.
...
PR: 14271
Submitted by: maintainer
1999-11-26 18:34:42 +00:00
Justin M. Seger
a1d94b37d5
Unbreak and upgrade to gcl-2.3
1999-11-25 18:34:01 +00:00
Justin M. Seger
fecf0e1ad1
Upgrade to tcl-8.2.2
1999-11-21 20:54:58 +00:00
Chris Piazza
d5a1e6c207
Update to the Sep1999 version of Hugs98
...
PR: 14898
Submitted by: maintainer
1999-11-20 22:49:40 +00:00
David E. O'Brien
199334c90f
Update to the 1999-11-10 development snapshot.
1999-11-15 02:02:35 +00:00
Steve Price
80abec415e
Update to version 0.6.1.
...
PR: 14631
Submitted by: maintainer
1999-11-14 01:42:00 +00:00
Steve Price
0e686e7e45
Update to version 1.4.2.
...
PR: 14629
Submitted by: maintainer
1999-11-14 01:39:00 +00:00
Steve Price
2f98a73650
Update to version 1.4.2.
...
PR: 14628
Submitted by: maintainer
1999-11-14 01:37:22 +00:00
Chris Piazza
b0cd70bd5f
Don't create a temp file in ${FILESDIR}
...
PR: 14857
Submitted by: OKAZAKI Tetsurou <okazaki@be.to>
1999-11-14 00:53:32 +00:00
Yukihiro Nakai
ed4b6e15e1
Add librep.
1999-11-11 10:19:54 +00:00
Yukihiro Nakai
81f68fde18
Initial import.
...
Lisp interpriter library.
1999-11-11 10:15:58 +00:00
Jacques Vidrine
56fe7a41c9
Activate ghc
1999-11-10 17:25:54 +00:00
Jacques Vidrine
9c225c6a3f
GHC: The Glasgow Haskell Compiler.
...
The Glasgow Haskell Compiler is a robust, fully-featured, optimising
compiler for the functional programming language Haskell 98
(http://www.haskell.org ). GHC compiles Haskell to either native code
or C. It implements numerous experimental language extensions to
Haskell, including concurrency, a foreign language interface, several
type-system extensions, exceptions, and so on. GHC comes with a
generational garbage collector, a space and time profiler, and a
comprehensive set of libraries.
PR: ports/13786
Submitted by: Simon Marlow <simonm@dcs.gla.ac.uk>
1999-11-10 17:25:29 +00:00
Daniel Eischen
005c22af55
Remove the GNAT release number from the description.
...
Pointed out by: billf
1999-11-09 18:33:00 +00:00
Daniel Eischen
f99a6e9a55
Oops, forgot to change the GNAT version number in the description.
1999-11-09 12:41:47 +00:00
Daniel Eischen
472667ca91
Upgrade GNAT to GNAT-3.12p, the latest public release from Ada Core
...
Technologies.
1999-11-09 12:33:43 +00:00
Satoshi Asami
5871ea61eb
Change PKGNAME to conform to our standards.
1999-11-05 09:02:15 +00:00
David E. O'Brien
128698d192
Update to the 1999-11-02 development snapshot.
1999-11-03 11:41:50 +00:00
Thomas Gellekum
ff7bef2c1e
Use Tk-8.2.
...
Submitted by: Ade Lovett <ade@lovett.com>
1999-11-03 09:45:26 +00:00
Jim Mock
3004d62494
Added http://www.fourmilab.to/atlast/ to MASTER_SITES.
...
PR: 14676
Submitted by: maintainer
1999-11-03 06:34:36 +00:00
Justin M. Seger
dc7f446eb0
Nuke tcl 8.1
...
Submitted by: Ade Lovett <ade@lovett.com>
PR: ports/14544
1999-11-02 04:03:19 +00:00
David E. O'Brien
a9426f70f2
Update to the 1999-10-25 snapshot.
1999-11-01 07:39:15 +00:00
David E. O'Brien
0f6ccbee56
Update to version 2.95.2.
1999-11-01 06:28:49 +00:00
Steve Price
b0d292a370
Activate the wamcc port.
1999-11-01 03:47:19 +00:00
Steve Price
89ab207b94
Initial import of wamcc version 2.22.
...
A Prolog-to-C translator from Inria.
PR: 13745
Submitted by: W. Gerald Hicks <wghicks@bellsouth.net>
1999-11-01 03:46:48 +00:00
Steve Price
01f755fa5b
Update to version 2.1.3.
...
PR: 14506
Submitted by: maintainer
1999-11-01 02:01:39 +00:00
Steve Price
65c3ab06b7
Add some missing manpages.
...
PR: 13677 (8 of 10)
Submitted by: Jeremy Lea <reg@shale.csir.co.za>
1999-11-01 01:55:25 +00:00
Steve Price
b4a01043ad
Update to version 5.31.
...
PR: 14577
Submitted by: Ade Lovett <ade@lovett.com>
1999-11-01 00:38:05 +00:00
Thomas Gellekum
a5476164ef
Link against libxpg4.
...
Submitted by: foxfair
Promote LDFLAGS in the installed setup.
1999-10-27 09:47:23 +00:00
Michael Haro
e6040291c8
update mastersite
...
PR: 14458
Submitted by: maintainer
1999-10-27 09:17:21 +00:00
David E. O'Brien
7cd735b575
Very minor style change.
1999-10-27 08:35:20 +00:00
Michael Haro
63f9ab5bb5
* Removed outdated master sites
...
* Added WWW: line into pkg/DESCR
PR: 14405
Submitted by: KATO Tsuguru tkato@prontomail.ne.jp
1999-10-27 08:14:40 +00:00
David E. O'Brien
0a2f9e05dc
Adopt ports I care about.
1999-10-26 07:51:26 +00:00
Andreas Klemm
138077d1e0
Update to new version 3.0.4
...
Recommended update because of bugs in versions < 3.0.4
(as Dirk reports).
Recommendation: probably it would be useful to import this version
into -current, let it settle there for a month and then merge it into
3.x-STABLE.
Submitted by: dirk.meyer@dinoex.sub.org (Dirk Meyer)
Reviewed by: andreas@FreeBSD.ORG
1999-10-23 19:27:10 +00:00
Bill Fenner
fcde3f99f1
Remove josh@quick.net as MAINTAINER. Email to josh@quick.net has
...
been bouncing with:
<josh@quick.net>: host mx.quick.net said: 550 <josh@quick.net>... User
unknown
for over 2 months.
1999-10-21 19:02:29 +00:00
Satoshi Asami
6b3a9f8de3
Remove xpl.
...
PR: 14268
Submitted by: Ade Lovett <ade@lovett.com>
- no maintainer since January 21st 1998
- marked as broken since October 14th 1998
- source tarball only seems to exist on ${MASTER_SITE_LOCAL}
(ftpsearch on 'xpl' didn't show up anything)
- no-one seems to be screaming about the fact it's been broken
for almost year
- does anyone actually run PL/1 (or derivatives thereof) on anything
other than those machines that ${DEITY} intended it to be run on?
Another one for the bit-bucket.
1999-10-12 10:07:55 +00:00
Tim Vanderhoek
43e04c360c
Add WWW: (ftp://ftp-icf.llnl.gov/pub/Yorick/yorick-ad.html).
1999-10-12 00:00:54 +00:00
Steve Price
40e15bcd90
Update to version 0.9.14.
...
PR: 14020
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
1999-10-10 23:51:49 +00:00
Steve Price
82791b6c29
Update to version 2.0.1
...
PR: 14187
Submitted by: maintainer
1999-10-10 23:30:28 +00:00
David E. O'Brien
2078ed00c4
Upgrade to the 1999-10-04 development snapshot.
1999-10-10 23:14:29 +00:00
David E. O'Brien
134508746d
Upgrade to the 1999-09-20 development snapshot.
1999-10-10 20:28:35 +00:00
Chuck Robey
86c9ecef2d
Fix checksum.
1999-10-04 18:37:38 +00:00
Satoshi Asami
985cd05238
Make this work with rev. 1.321 of bsd.port.mk (support for distfiles
...
with directory names). In fact, what these ports were doing before
were not supported -- but they can walk under the sun now.
1999-10-01 09:31:29 +00:00
John Polstra
e9f6228138
Don't try to get the GCC-2.7.2.1 sources from "/usr/src". They
...
aren't there any more in -current.
1999-09-29 05:00:43 +00:00
Satoshi Asami
578b269d65
These ports are building now, so take out BROKEN_ELF.
1999-09-21 10:11:25 +00:00
David E. O'Brien
0e377cf11c
Make PREFIX clean.
1999-09-19 19:02:30 +00:00
Tim Vanderhoek
9407aaf7a3
Fix a mis-use of Ie. Detorture the English.
1999-09-18 01:43:05 +00:00
Bill Fenner
480c8a66fb
Resolve many 301 Moved Permanently URLs in DESCR.
1999-09-17 19:16:35 +00:00
Justin M. Seger
afe6dc371f
Nuke tcl 7.5 and tk 4.1
...
They are no longer required by the ports collection.
1999-09-17 15:04:39 +00:00
Satoshi Asami
a780b738bc
Back out previous commit. srwin.o gets installed when I do it in a
...
chroot dir by hand but not through the regular package building process.
Foo!
1999-09-11 13:05:34 +00:00
Satoshi Asami
6bf148aa50
Add missing file lib/sr/srwin.o.
1999-09-11 12:50:03 +00:00
Peter Wemm
bf91418dfa
apparent typo: $Id4 -> $FreeBSD$
1999-09-10 18:58:20 +00:00
David E. O'Brien
e2598c5d8c
Do this in a more general way.
1999-09-10 17:44:53 +00:00
David E. O'Brien
afd205555d
Errrr. The GCC install dinks (aka `fix-includes') with curses.h on
...
4.0-CURRENT, but not 3-STABLE. Remove curses.h so this will package on
3-STABLE and deal with it post-3.3 RELEASE.
1999-09-10 17:43:23 +00:00
Thomas Gellekum
b29e6d579f
$DISTNAME changed.
1999-09-10 12:39:33 +00:00
John Polstra
d4bfe817b9
Add a last-minute fix to a pathname which I unfortunately left out
...
of the previous commit.
1999-09-10 00:40:04 +00:00
Jacques Vidrine
68ac3ffad5
Update 1.6d -> 1.7
...
PR: ports/11270
Submitted by: Pedro F. Giffuni <pfgiffun@bachue.usc.unal.edu.co>
1999-09-09 19:18:39 +00:00
Thomas Gellekum
216192c2d8
Upgrade to 1.1.1.
1999-09-09 12:41:42 +00:00
Thomas Gellekum
265250ea05
Upgrade to 0.6.0.
1999-09-09 10:25:57 +00:00
John Polstra
718488689a
Oops, update checksum for new distfile.
1999-09-08 18:07:01 +00:00
John Polstra
fbeafdb5f9
Make this port build again under both 3.x-stable and 4.x-current.
...
It used to depend on a bunch of files from the FreeBSD source tree.
But the import of gdb-4.18 and the restructuring connected with
that broke the port. I have created a second distfile containing
the needed files, and this port now gets them from there.
Also mark this port broken for everything except i386/elf. I don't
have time to fix the other platforms before the 3.3-RELEASE ports
freeze.
1999-09-08 18:02:33 +00:00
David E. O'Brien
1066fc65e8
Upgrade to version 2.95.1.
1999-09-08 10:41:57 +00:00
Joseph Koshy
4de4b45825
Add a backup MASTER_SITE.
1999-09-08 04:24:00 +00:00
Steve Price
ec1b2d16ed
The tiff port now lives in ports/graphics/tiff.
1999-09-07 10:45:31 +00:00
Thomas Gellekum
15abf055ee
Distfile changed, update checksum.
1999-09-07 07:38:18 +00:00
Justin M. Seger
402c6b0a85
Nuke tclX75
1999-09-06 23:19:17 +00:00
Chris Piazza
79f1423aa3
md5 changed for no apparent reason
1999-09-06 05:20:00 +00:00
David E. O'Brien
244bef6ca3
portlint
1999-09-05 22:15:15 +00:00
Justin M. Seger
b88f9d4cef
Upgrade repository copies to tcl/tk 8.2
1999-09-05 16:32:10 +00:00
David E. O'Brien
1c5fe891c5
portlint
1999-09-04 20:34:13 +00:00
David E. O'Brien
c799c513f4
portlint
1999-09-04 20:14:11 +00:00
Justin M. Seger
cb6388104e
Unbreak and upgrade tclX80 to 8.0.4
...
PR: ports/13544
Submitted by: Ade Lovett <ade@lovett.com>
1999-09-02 21:59:34 +00:00
Michael Haro
65ab34a667
FreeBSD.ORG -> FreeBSD.org
...
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
1999-08-31 06:53:31 +00:00
Chris Piazza
dbf914ed73
Author-supplied patchfile changed, so update md5 and patch-aa
...
so this port works again.
1999-08-31 03:40:48 +00:00
Peter Wemm
50fb080408
$Id$ -> $FreeBSD$
1999-08-31 03:04:38 +00:00
Peter Wemm
85bc214e28
$Id$ -> $FreeBSD$
1999-08-31 02:11:56 +00:00
Peter Wemm
a53421230c
$Id$ -> $FreeBSD$
1999-08-31 01:53:22 +00:00
David E. O'Brien
f3383ee2f6
Remove support for the Chill language. If someone really, really needs
...
the Chill language let me know.
1999-08-30 22:43:15 +00:00
David E. O'Brien
a672b88679
trim distfiles
1999-08-30 22:38:06 +00:00
David E. O'Brien
c39919f117
Add RCS keyword.
1999-08-30 22:35:30 +00:00
Peter Wemm
fe8f04069f
$Id$ -> $FreeBSD$
1999-08-30 12:01:11 +00:00
Chris Piazza
d0b7b98aa2
Make this port a little more sane. It was broken
...
for any system that wasn't x86 on freebsd 3.1. The
port is still marked BROKEN because it sets PREFIX in
the Makefile.
PR: 13423
Submitted by: Ade Lovett <ade@lovett.com>
1999-08-28 16:58:27 +00:00
Chris Piazza
3f546e7a41
Update to version 9.3.2 to unbreak the port
...
(the distfile is named unix.tgz..ugh)
1999-08-28 16:36:10 +00:00
Michael Haro
a941c55187
env -> ${SETENV}
1999-08-28 03:41:25 +00:00
Michael Haro
3262cce303
expr -> ${EXPR}
...
mv -> ${MV}
rm -> ${RM}
tr -> ${TR}
1999-08-28 02:42:41 +00:00
Michael Haro
8d6f14a9b2
sed -> ${SED}
1999-08-28 02:17:34 +00:00
Michael Haro
af5f314286
ln -> ${LN}
1999-08-28 01:58:05 +00:00
Michael Haro
bbf7c96c85
portlint and move manpages from PLIST to Makefile
1999-08-27 22:42:05 +00:00
Michael Haro
b8f8618362
echo -> ${ECHO} or ${ECHO_MSG} and in some cases, move echo stuff
...
to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE}
1999-08-27 22:30:39 +00:00
Chris Piazza
3a88c41ac1
Update to version 1.4.0
...
PR: 13305
Submitted by: maintainer
1999-08-26 21:17:23 +00:00
Chris Piazza
670154fc8e
Update to version 1.4.0
...
PR: 13304
Submitted by: maintainer
1999-08-26 21:10:23 +00:00
Chris Piazza
3528de335b
Cope with ruby 1.4
...
PR: 13306
Submitted by: maintainer
1999-08-26 21:09:21 +00:00
David E. O'Brien
f0f690adc1
Change Id->FreeBSD.
1999-08-25 06:35:40 +00:00
David E. O'Brien
9a9ac6ba9d
Change Id->FreeBSD.
1999-08-25 05:57:29 +00:00
David E. O'Brien
04eda6dcee
Upgrade to version 2c5.
1999-08-24 08:15:29 +00:00
Justin M. Seger
7eeb883e33
Upgrade to tcl-8.1.1 and tk-8.1.1
1999-08-24 01:58:13 +00:00
Thomas Gellekum
60607b2053
Use `read -e', so makesetup groks continuation lines.
...
PR: 13276
Submitted by: Randall Hopper <aa8vb@ipass.net>
1999-08-23 12:00:46 +00:00
Michael Haro
535add65ac
grep -> ${GREP}
...
true -> ${TRUE}
false -> ${FALSE}
1999-08-23 04:23:59 +00:00
Michael Haro
235481b52a
awk -> ${AWK}
...
basename -> ${BASENAME}
cat -> ${CAT}
cp -> ${CP}
ldconfig -> ${LDCONFIG}
mkdir -> ${MKDIR}
1999-08-22 23:33:47 +00:00
Chris Piazza
c8d77a093b
Change all ports that need a new gcc on 3.x to use USE_NEWGCC.
1999-08-22 19:46:45 +00:00
Michael Haro
5281212be3
chmod -> ${CHMOD}
...
chown -> ${CHOWN}
1999-08-22 19:01:07 +00:00
Chris Piazza
17f522ca5c
Update to version 5.30
...
PR: 13242
Submitted by: Ade Lovett <ade@lovett.com>
1999-08-19 03:19:03 +00:00
David E. O'Brien
ba5842e8e7
Upgrade to version 2.95.1.
1999-08-19 01:10:55 +00:00
David E. O'Brien
427dd25340
Use a better sed(1) pattern in case I break __FreeBSD__ again.
1999-08-18 23:58:55 +00:00
David E. O'Brien
e0964473d6
Don't assign __FreeBSD__ a value here. (pulled too much in from
...
src/contrib/egcs/ again)
PR: 13224
Submitted by: imura@cs.titech.ac.jp
1999-08-18 23:58:21 +00:00
David E. O'Brien
2e3020eaae
Key off the DISTNAME more, so that upgrading requires less editing.
1999-08-18 19:03:09 +00:00
Chris Piazza
56fe7a4c6a
egcc/eg++ have been renamed to gcc295/g++295. Change
...
all the ports that use them accordingly.
PR: 13205
Submitted by: Ade Lovett <ade@lovett.com>
1999-08-17 19:37:11 +00:00
David E. O'Brien
1b26a2abec
As in the i386, `tm.h' includes headers for us.
1999-08-16 10:57:25 +00:00
David E. O'Brien
36853ef21c
alpha-freebsd-elf.h should have gone away in the gcc-2.95 upgrade.
1999-08-16 10:54:46 +00:00
David E. O'Brien
c84f599e15
Include the proper arch header for a.out systems.
1999-08-16 10:51:53 +00:00
David E. O'Brien
0a0cbb1d65
More EGCS->GCC transition.
...
* binaries/manpages are now gcc295 / g++295 / g77
* use {MASTER_SITE_GNU}
1999-08-16 00:21:05 +00:00
David E. O'Brien
c2530c49c0
Make -pthread work again -- pulled too much in from src/contrib/egcs/
1999-08-16 00:12:21 +00:00
Chris Piazza
db6d56e420
Activate nqc
1999-08-14 22:09:02 +00:00
Chris Piazza
58407c048a
Import of nqc,
...
A compiler for a simple language for programming the LEGO RCX or CyberMaster
controllers. The language itself is "Not Quite C" and includes preprocessor
and control structures very similar to the C language, but with restrictions
imposed by the limitations of the RCX hardware/firmware itself.
Besides compiling, nqc also provides functions for downloading the RCX
firmware as well as uploading programs to and downloading from the RCX.
PR: 13081
Submitted by: Kelly Yancey <kbyanc@posi.net>
1999-08-14 22:08:36 +00:00
David E. O'Brien
67ea3dcdcb
Tweak a German master site.
...
Submitted by: Dirk Froemberg <dirk@FreeBSD.org>
1999-08-09 15:50:58 +00:00
David E. O'Brien
60c2b68f10
BROKEN='waiting for new patches against gcc-2.95'
1999-08-05 17:33:13 +00:00
David E. O'Brien
6468cd774e
"egcs-devel" --> "gcc-devel"
1999-08-05 16:22:10 +00:00
David E. O'Brien
356cdb7882
Merge parts of the GCC-2.95 update, in preperation for the 1st post 2.95
...
snapshot.
Mark BROKEN until the next Cygnus snapshot.
1999-08-05 16:21:08 +00:00
David E. O'Brien
820ec33aeb
Add "java" to categories list. GCC-2.95 now has parts of a Java compiler
...
bunded in.
1999-08-05 16:07:53 +00:00
David E. O'Brien
4d4d7bde85
Update to GCC-2.95 (what would have been EGCS-1.2).
1999-08-05 16:06:07 +00:00
Masafumi Max NAKANE
8ed47a3dea
Upgrade to 3.2.9.
1999-08-05 09:56:34 +00:00
Thomas Gellekum
d627261905
Add version number to package name.
...
PR: 12954
Submitted by: Neil Blakey-Milner <nbm@rucus.ru.ac.za>
1999-08-04 08:20:29 +00:00
Bill Fenner
35fc3fa02a
Fix WWW: typos
...
Found by: not-yet-completed addition to port distfile checker
suggested by Tim Vanderhoek
1999-08-01 04:54:40 +00:00
Thomas Gellekum
4bb9d08e75
Upgrade to 1.1.0.
1999-07-29 14:03:47 +00:00
Thomas Gellekum
992725797a
Add the SHA module to the build.
1999-07-28 07:54:24 +00:00
David E. O'Brien
bfd0ab6504
Fix SWITCH_TAKES_ARG / WORD_SWITCH_TAKES_ARG breakage on the Alpha created
...
when I changed from defining these in gcc/config/freebsd.h and instead defined
extensable FreeBSD-wide definitions.
While I am here, move the *SWITCH_TAKES_ARG = FBSD_*SWITCH_TAKES_ARG
assignments to the global file to remove one more thing from the arch specific
config files.
1999-07-25 03:34:39 +00:00
Marcel Moolenaar
d7d791cfa6
Make port depend on linux_base instead of linux_lib.
1999-07-21 14:55:43 +00:00
David E. O'Brien
228ed0867b
Update to the 1999-07-18 beta snapshot of GCC-2.95.
1999-07-20 15:30:52 +00:00
Chris Piazza
62a1ad1744
BROKEN= "Hardcoded FreeBSD release numbers in PLIST"
...
I'll fix this in a little while.
1999-07-18 06:28:44 +00:00
Chris Piazza
a7b26a212e
Give this port a USE_XLIB so it'll link. Also move the CC=egcc
...
into the ${OSVERSION} check so it'll actually compile on
-current with egcs.
1999-07-18 06:27:18 +00:00
Satoshi Asami
c72cb539d0
${WRKDIRPREFIX}/symlink ${PORTSDIR} fix. Don't watch if you just had lunch.
...
Submitted by: maintainer (no, really!)
1999-07-15 20:42:03 +00:00
Thomas Gellekum
ca38b9f4d4
Fix package building when you're leaving out optional parts, like Tk.
...
PR: 12648
1999-07-15 11:59:41 +00:00
David E. O'Brien
a90627b9d6
Don't waste CDROM real estate on a soon to be OBE version.
1999-07-15 11:14:11 +00:00
David E. O'Brien
dcbfd9ec96
Upgrade to the July 12th GCC-2.95 prerelease.
1999-07-15 11:08:16 +00:00
Chris Piazza
6b961c6c13
Fix a typo I introduced.
1999-07-13 03:00:51 +00:00
Chris Piazza
da14f13abc
Activate irb
1999-07-13 02:56:58 +00:00
Chris Piazza
22c5d94781
irb: Interactive Ruby. A tool to input and evaulate expressions
...
of Ruby from standard input.
PR: 12125
Submitted by: Yasuhiro Fukuma <yasuf@big.or.jp>
1999-07-13 02:56:48 +00:00
Masafumi Max NAKANE
55e51357c0
Upgrade to 3.2.8.
1999-07-08 11:11:14 +00:00
Chris Piazza
83ec11e307
Install a few missing libraries and headers.
...
PR: 12544
Submitted by: maintainer
1999-07-08 06:02:55 +00:00
Tim Vanderhoek
3877104668
If at first you don't succeed, try (try) again.
...
This should fix TenDRA installation. I did test it this time, and it failed
with
chown: hoek: illegal group name
*** Error code 1
but that's not my problem.
1999-07-07 22:42:54 +00:00
Tim Vanderhoek
f9be3f5775
Don't use ${OSREL} and %%OSREL%% here. We need the full uname -r
.
...
This should fix the install (untested).
1999-07-07 08:10:34 +00:00
Thomas Gellekum
ea25e2cf33
Install the contents of the Tools directory by default. This can be
...
turned off by specifying `WITH_TOOLS=NO' when building.
PR: 12436
1999-07-06 13:27:38 +00:00
David E. O'Brien
a5c7dc9572
Upgrade to the 1999-06-29 pre-GCC-2.95 snapshot.
1999-07-06 07:29:39 +00:00
Chris Piazza
9deb1a8c9e
Activate lua.
1999-07-06 01:28:42 +00:00
Chris Piazza
59dc9e23d0
Lua:
...
A programming language originally designed for extending applications,
but also frequently used as a general-purpose, stand-alone language. Lua
combines simple procedural syntax (similar to Pascal) with powerful data
description constructs based on associative arrays and extensible semantics.
PR: 12459
Submitted by: Richard Kiss <richard@homemail.com>
1999-07-06 01:28:28 +00:00
Steve Price
aba8e158d0
Correct spelling in a comment.
1999-07-04 21:49:26 +00:00
Steve Price
0d8ac3d80e
Mark this port only for i386.
1999-07-04 21:03:59 +00:00
David E. O'Brien
978929c178
The number of things this port installs has grown.
...
(mostly junk in PREFIX/lib/gcc-lib/.../include)
1999-07-04 20:58:11 +00:00
David E. O'Brien
7d3e0363c5
Changes to work with updated files/freebsd.h.
1999-07-04 20:57:15 +00:00
David E. O'Brien
c10a03a4c2
Minor reorg of the dealing with autoconf' and
autoheader' stuff.
1999-07-04 20:55:43 +00:00
Steve Price
532514fbb8
Use the PLIST_SUB capabilities of bsd.port.mk to substitute OSREL in
...
pkg/PLIST. Also mark this for i386 only.
1999-07-04 20:48:00 +00:00
Sheldon Hearn
c3b937ea6d
Remove the two "priming" MASTER_SITEs now that ftp.freebsd.org has
...
Daniel Eischen's boot-strapping package.
1999-07-01 14:42:41 +00:00
David E. O'Brien
ef62a281ed
Define "OBSTACK_CHUNK_SIZE" as getpagesize().
...
Our malloc can allocte pagesized blocks efficiently and the EGCS default
size of 4072 bytes is not optimal.
Protect #define's and other minor syncing with
src/contrib/egcs/gcc/config/freebsd.h
OBSTACK_CHUNK_SIZE Submitted by: Hidetoshi Shimokawa
1999-06-28 09:52:43 +00:00
David E. O'Brien
5796f2d63b
Cleanup the FREEBSD_NATIVE stuff, which we don't use anymore in this context.
1999-06-28 09:07:17 +00:00
Bill Fumerola
08339d7df6
New ports/{irc,java,x11-servers} categories, Step #2 - update old Makefiles.
1999-06-28 01:46:17 +00:00
Tim Vanderhoek
e32f86f31b
Remove trailing spaces, and any periods that were hidden by them.
1999-06-28 00:45:20 +00:00
Tim Vanderhoek
a84b5b5f94
#4/4 enforcing Caps, no period
...
[Has anyone figured-out what makes the number 393 so interesting to PW, now?]
I wonder what was going through Jordan's head during his infamous
$Id$-smashing commit.
Before I forget....
Thanks to naddy@mips.rhein-neckar.de (Christian Weisgerber) for prompting
this commit. See msg-id: 7geokh$tje$1@mips.rhein-neckar.de
1999-06-26 19:22:14 +00:00
Tim Vanderhoek
dd9ff05a6a
Commit #3/4 to enforce caps, no period.
...
FWIW, checkout of these things took 5+hrs, staying on the local
.freebsd.org net w/o hitting the 'net at all.
As promised,
$ time cvs ci
real 67m51.701s
user 0m1.250s
sys 0m5.345s
1999-06-26 19:12:45 +00:00
Tim Vanderhoek
748713c3f6
As threatened, enforce the "Capital, no period" rule. Ellipses are
...
permitted. Note that, given current numeric motif of PW, this is done
in four equally-sized commits of 393 files each.
1999-06-26 17:19:19 +00:00
David E. O'Brien
5b92de7d87
Upgrade to the 19990623 GCC 2.95 pre-release snapshot.
1999-06-24 19:11:57 +00:00
Sheldon Hearn
cc4e71cb59
Update 3.10p -> 3.11p:
...
* Build requires a GNAT compiler, for which the maintainer has
created a package. For now, provide two MASTER_SITEs from which
it is available so that it'll find its way into the FreeBSD
distfiles.
* Uses variables in the PLIST to reduce diff sizes in future.
* Doesn't install info files, which are virtually duplicates of
the ones we already have.
* AOUT support is on its wAy OUT. Do what we can, but don't blow
any fuses.
* Hand maintainership over to Daniel Eischen, at the request of
the previous maintainer.
PR: 10093
Submitted by: Daniel Eischen <eischen@vigrid.com>
1999-06-24 11:11:28 +00:00
Jun Kuriyama
d38ab224fc
Activate jsdk.
1999-06-23 15:26:13 +00:00
Satoshi Asami
bfdba6df30
Change all permutations in capitalization of "asami@freebsd.org" to
...
"asami@FreeBSD.org".
1999-06-21 23:25:11 +00:00
David E. O'Brien
34f41f20b2
Update to the 19990616 GCC 2.95-prerelease.
1999-06-21 18:17:56 +00:00
Sheldon Hearn
9ca6cd3927
Update 3.3 -> 4.6 and add a master site. Patches differ slightly from
...
those submitted.
PR: 10699
Submitted by: Jose Marques <jose@nobody.org>
1999-06-21 13:56:51 +00:00
Justin M. Seger
28b16a0a15
Upgrade to tcl and tk 8.1.
...
Move NO_LATEST_LINK from tcl81 and tk81 to tcl80 and tk80.
Submitted by: YAZAKI Hiroyuki <yazaki@nn.iij4u.or.jp>
1999-06-20 14:05:44 +00:00
Thomas Gellekum
1722c439ae
Link some modules against libmytinfo to pick up a working tputs().
...
Noticed by: Klaus-Jürgen Wolf <kjwolf@online.de>
1999-06-18 11:42:21 +00:00
David E. O'Brien
2f3c81d522
Update to the 1999-06-08 (gcc 2.95 prerelease).
1999-06-15 07:31:21 +00:00
Steve Price
c1e2ca9143
Add the intel2gas port.
1999-06-11 00:14:02 +00:00
Steve Price
5532507d34
Initial import of intel2gas version 1.2.
...
Converts Intel assembly language (nasm) to AT&T syntax (gas).
PR: 11672
Submitted by: G. Adam Stanislav <adam@whizkidtech.net>
1999-06-11 00:13:26 +00:00
Steve Price
67da5a413e
Activate the shujit port.
1999-06-10 23:58:03 +00:00
Hidetoshi Shimokawa
683d7f1024
Fix for alpha.
...
- sync alpha-freebsd.h with /usr/src/contrib/egcs/gcc/config/alpha/freebsd.h
- add patch for mkfixinc.sh
- PLIST kludge
1999-06-10 14:31:10 +00:00
Steve Price
9167e1ba1a
Turn on the tya port.
1999-06-10 08:11:07 +00:00
Steve Price
d5054b16ca
Register the jfc port it it's new home.
1999-06-10 01:00:28 +00:00
Hidetoshi Shimokawa
3efef38a70
Replace i386-freebsd with PERL_ARCH so that packages can be built on alpha.
1999-06-07 10:57:49 +00:00
Michael Haro
5ce8e8e5c7
Remove the test to create ${PREFIX}/share/info/dir as it is now
...
in bsd.port.mk and this helps to unify the check and install.
1999-06-05 22:32:11 +00:00
Thomas Gellekum
3f0dc427d6
Activate python-doc-*.
1999-06-02 10:25:07 +00:00
Thomas Gellekum
03325380d3
Documentation for the Python language in PS format for letter paper.
1999-06-02 10:21:28 +00:00
Thomas Gellekum
9b02df80ab
Documentation for the Python language in PS format for A4 paper.
1999-06-02 10:19:53 +00:00
Thomas Gellekum
e988e2b567
Documentation for the Python language on PDF format for letter paper.
1999-06-02 10:18:17 +00:00
Thomas Gellekum
d56308270a
Documentation for the Python language in PDF format and for A4 paper.
1999-06-02 10:16:17 +00:00
Thomas Gellekum
a957317854
New port python-doc-html. As the name suggests: documentation for
...
the Python language in HTML format.
This port includes the necessary files for other formats, like PDF and PS,
in a fashion similar to gimp-manual-html.
1999-06-02 10:13:25 +00:00
Steve Price
09b88ce431
Anyone up for a little ocaml on their Alpha box?
1999-05-31 05:14:39 +00:00
Steve Price
bbc7c902ee
Mark broken for -current boxes with egcs.
1999-05-31 04:56:23 +00:00
Steve Price
aab0bf36c3
Mark broken for Alpha because of bus errors from unaligned accesses.
1999-05-31 04:52:27 +00:00
David E. O'Brien
dd0c9cce89
Upgrade to 19990524 gcc-2.95 prerelease.
1999-05-26 10:26:29 +00:00
Thomas Gellekum
ee48e888bf
New port py-mxTextTools, some tools for fast text processing in Python.
1999-05-26 07:53:18 +00:00
Tim Vanderhoek
b9d6168895
Don't unintentionally overwrite an existing tclsh/wish.
...
Reported-By: Mikhail Teterin <mi@kot.ne.mediaone.net>
1999-05-26 00:34:26 +00:00
Tim Vanderhoek
0d1c798403
<mumble> <mumble>
...
PR: ports/9787
1999-05-25 18:10:38 +00:00
David E. O'Brien
632eeb3298
Fix "EGCS_REV".
1999-05-24 17:13:47 +00:00
David E. O'Brien
89227c0f8d
Upgrade to version 1.1.3, and sync with changes to the egcs port.
1999-05-24 17:13:07 +00:00
Thomas Gellekum
a7ec9960d9
Enable the parser module.
...
Submitted by: nectar
1999-05-21 07:06:06 +00:00
David E. O'Brien
69a7447907
Bye-bye g77. (use egcs-devel instead)
1999-05-20 21:53:31 +00:00
Thomas Gellekum
5963bdad77
Better support for local $CFLAGS.
1999-05-19 08:47:50 +00:00
David E. O'Brien
52b78a29b0
Upgrade to the 19990517 snapshot. EGCS is not in a feature freeze for the
...
upcoming 1.2 release. Which, BTW, will be called GCC-2.95.
1999-05-18 18:15:36 +00:00
Satoshi Asami
48017f46f1
Minor cleanup - remove Xlib dependency, as it's already there through tk.
...
Submitted by: maintainer
1999-05-12 23:02:31 +00:00
Satoshi Asami
18da63cbec
Depend on tk, not tcl (which is pulled in from tk anyway).
1999-05-12 09:53:18 +00:00
Satoshi Asami
8158434324
Fix ELF build. Change maintainer's mail address.
...
Submitted by: maintainer, of course
1999-05-12 05:29:51 +00:00
Satoshi Asami
89f4620117
Remove missing file.
1999-05-12 05:29:08 +00:00
Satoshi Asami
c642c23cb7
Don't write to ${PKGDIR}/PLIST.
1999-05-11 07:27:03 +00:00
Satoshi Asami
7bfb1be495
Rename all pwrite()s to deal with this change:
...
1.24.2.1 Wed May 5 23:19:59 1999 UTC by dt
Branch: RELENG_3
Diffs to 1.24 ; Diffs to 1.26
MFC: pread() and pwrite().
1999-05-10 22:22:43 +00:00
Vanilla I. Shu
a35dd2ed8b
Add a patch for 4.0current.
1999-05-10 16:11:45 +00:00
Thomas Gellekum
680ad582e3
New port gnustep. GNUstep is a set of general-purpose Objective-C libraries
...
base on the OpenStep standard developed by NeXT (now Apple) Inc.
1999-05-10 11:32:03 +00:00
Steve Price
9c70450344
Add '%D' so we get the whole path for the '@unexec rm's.
...
PR: 7848
Submitted by: Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
1999-05-09 16:43:49 +00:00
Steve Price
fb7d75a18e
This port needs X11 libs.
...
PR: 11522
Submitted by: maintainer
1999-05-09 16:41:29 +00:00
Steve Price
94d9a12983
Fix profiling on ELF systems.
...
PR: 11566
Submitted by: Ronald Kuehn <rk@ronald.org>
1999-05-09 16:40:14 +00:00
Jacques Vidrine
ac155caacb
Update 2.3 -> 2.4
1999-05-09 15:17:05 +00:00
Jacques Vidrine
0c0598fec1
Fix MASTER_SITES:
...
* alix.inria.fr has been inaccessible for a couple of weeks
* path on ftp.cs.uni-magdeburg.de was wrong
1999-05-09 15:00:05 +00:00
Chris Timmons
1ae2b20128
Use MLINKS and friends (rather than PLIST literals) to stipulate man pages & links
1999-05-06 20:14:40 +00:00
Joseph Koshy
b0195c0388
Fix build breakage.
...
Detected by: PW's automated build tools.
1999-05-06 05:21:19 +00:00
Bill Fenner
7d82a241eb
Don't try running mkLinks (since it doesn't do anything anyway)
...
Use MLINKS= to accomplish what mkLinks wanted to do.
1999-05-04 20:50:11 +00:00
Bill Fenner
11dd3a5f4f
Fix the script that makes the long-name man page links, and add the
...
long-name man pages to PLIST.
Note that instead of including a 54k patch, there's a post-patch: target
in the Makefile that uses sed.
PR: ports/9786 and ports/9787
1999-05-04 19:33:50 +00:00
Michael Haro
99e0b1f29f
Yet more WWW: additions
1999-05-03 06:13:27 +00:00
Steve Price
f3bdae86c8
Use new set of diffs from author and make this compile on the Alpha.
...
PR: 11417
Inspired by: Pedro F. Giffuni <pfgiffun@bachue.usc.unal.edu.co>
1999-05-03 02:36:25 +00:00
Satoshi Taoka
65d4f4c63b
Added otcl and jdk-tutorial
1999-04-30 18:17:37 +00:00
Satoshi Taoka
b66187e805
MIT Object Tcl
...
PR: 11338
Submitted by: Oscar Bonilla <obonilla@fisicc-ufm.edu>
1999-04-30 16:36:22 +00:00
Chris Timmons
eedf643194
Tcl 8.0.5. Fenner's MLINK PR TBA RSN
1999-04-30 16:09:55 +00:00
Kris Kennaway
bdb0f6273c
Update to 990416 version.
...
Some commentary from Mr. bwk:
Mar 5, 1999:
after hearing from yet another innocent victim, changed
isnumber to is_number to avoid the problem caused by
freeBSD gratuitously and incorrectly including the name
isnumber in the standard header file ctype.h.
Prompted by: bento
1999-04-30 14:09:59 +00:00
Joseph Koshy
9a8e5dff33
activate SIOD
1999-04-28 09:47:15 +00:00
Joseph Koshy
e272093d6d
Scheme in one Day/Defun, a small footprint implementation of Scheme with
...
some database, unix programming and cgi scripting extensions.
Requested by: Philippe Laliberte <arsphl@oeil.qc.ca> on -ports
1999-04-28 09:45:39 +00:00
Satoshi Taoka
7128279fe2
a Ruby interface to Tcl/Tk libraries
...
PR: 10907
Submitted by: Yasuhiro Fukuma <yasuf@big.or.jp>
1999-04-27 12:39:47 +00:00
David E. O'Brien
c9948b52d8
add f2c & f77
1999-04-24 22:51:09 +00:00
David E. O'Brien
bbbfbf9e10
driver utility for f2c and gcc
...
PR: ports/11220
Submitted by: Steven G. Kargl <kargl@troutmask.apl.washington.edu>
1999-04-24 22:50:24 +00:00
David E. O'Brien
9da570befc
f2c FORTRAN "compiler" port'ified from src/contrib/
...
PR: ports/11220
Submitted by: Steven G. Kargl <kargl@troutmask.apl.washington.edu>
1999-04-24 22:33:15 +00:00
Joseph Koshy
19065e7ceb
Unbreak for ELF.
1999-04-22 07:50:48 +00:00
Jacques Vidrine
dff50484f7
Add some master sites.
1999-04-22 07:42:45 +00:00
David E. O'Brien
90cf712e7a
Sync up with some diffs I sent to Cygnus.
1999-04-22 00:40:40 +00:00
Marc G. Fournier
a05c0a07b8
this should finish cleaning up the WWW_SITE -> DESCR/WWW: mess ...
1999-04-22 00:17:18 +00:00
Jacques Vidrine
2cfa26bfdd
Remove ``NO_LATEST_LINK''
...
Approved by: Maintainer <tg@FreeBSD.ORG>
1999-04-21 16:20:05 +00:00
David E. O'Brien
cfe859a7ce
turnon egcs-devel
1999-04-21 07:49:39 +00:00
David E. O'Brien
ccfd6f92ac
I give you the latest and greatest of the EGCS snapshot series.
...
This is their bleeding edge offering. This will enable us to better track
the direction EGCS is going for future upgrades of /usr/contrib/egcs/.
Above ver 1.1.2, this offering gives you many C++ fixes/enhancements, *and*
a native Java compiler.
1999-04-21 07:48:59 +00:00
Michael Haro
2a0f68dc16
Update from 2.0 to 2.2
...
Note: Matt Dillon's 2xP3/450 w/512MB can build world over NFS faster than my
k6-2 333 can compile this port. It was *NOT* fun to test this port.
Maybe someone else (with a super fast computer) could make sure
everything works. This port does pass the make install deinstall
reinstall package deinstall test though so I assume everything
is fine.
PR: 11242
Submitted by: maintainer with fixes by me
1999-04-21 06:52:10 +00:00
Jacques Vidrine
b1860f81da
* Update python 1.5.1 -> 1.5.2
...
* Remove python-beta
1999-04-21 05:56:27 +00:00
Masafumi Max NAKANE
0bfe1ec32e
Upgrade to 3.2.5.
...
PR: 10801
Submitted by: Dan Cross <tenser@hurricane.phys.psu.edu>
Minor tweaks by: max
1999-04-20 10:51:46 +00:00
Steve Price
9fdab507a9
Update to version 1.2.5.
...
PR: 10906
Submitted by: maintainer
1999-04-19 03:55:55 +00:00
David E. O'Brien
6325fcf217
Fix the CPP_PREDEFINES so it properly gets the "global" definition too.
1999-04-18 01:33:05 +00:00
Joseph Koshy
5fa21caf7f
Upgrade to v2.1.1
...
Ok'ed by: Maintainer.
1999-04-13 11:01:48 +00:00
Satoshi Asami
73746c7d97
Mark this FORBIDDEN while DavidO works on an upgrade after a repo copy.
1999-04-13 05:41:10 +00:00
Bill Fumerola
be98a3dc70
Real URLs that reference directories end in '/'
1999-04-08 21:12:34 +00:00