Take over the maintainership from Yasuhiro Fukuma <yasuf@bsdclub.org>,
with his approval. I can never thank him too much for his previous
work which led me in the right direction! :)
lang/ruby:
- Add a patch for find.rb, which fixes the bug found after
1.6.1 was released.
databases/ruby-gdbm, */ruby-{tcltklib,tk}:
- Remove files/md5 and refer to lang/ruby's one.
Submitted by: kris
(2) Include bsd.ruby.mk if USE_RUBY and USE_LIBRUBY are defined.
Submitted by: ruby-czar knu
(3) USE_QT2 now uses qt22 instead of qt21.
Submitted by: will
(4) Typo: RUN_DEPENDS= -> RUN_DEPENDS+= in USE_LINUX.
Submitted by: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
(5) Add ${MTEE_FOLLOWS_SYMLINKS} to mtree arg. This is either "-L" or
undefined, so it will only change the behavior when mtree actually
has support for the flag.
Submitted by: ache
(6) Change nesting of .ifs around MOTIF_OPEN -- it used to be inside
PARALLEL_PACKAGE_BUILD. I don't know what I was smoking.
(7) Add new category french. Now the French have the same thing the
Germans have had for a while. :)
Requested by: Martin Blapp <mb@imp.ch>
(8) Add new virtual category zope.
Requested by: Neil Blakey-Milner <nbm@mithrandr.moria.org>
MASTER_SITES into bsd.sites.mk (MASTER_SITE_XFREE). Also add officially
announced by xfree http mirror. Following is the announcement.
[20 September 2000]
XFree86 nows offers http download access! This is a big story for those
who cannot download via ftp access because of proxy/firewall concerns.
This has been generously donated by the Computing Center of the University
of Applied Sciences in Esslingen, Germany. This is a full ftp mirror
repository which is updated hourly with a connection speed of 20 MegaBit.
in the log.)
Print oun out a warning when there is a setuid/gid program or a
startup script installed.
Submitted by: kris
(1') Print out directory correctly by substituting ${PREFIX} properly.
Submitted by: knu
(2) Now variable PERL_CONFIGURE, which runs Perl's Makefile.PL.
PR: 19241
Submitted by: Christian Weisgerber <naddy@unix-ag.uni-kl.de>
Reviewed by: markm, ache
(3) Print out distinctive message when forcefully trying BROKEN ports
on parallel build cluster. This is used by the errorlog parser to
put a tag for BROKEN ports.
Requested by: ade
(4) Print out name of failed patch plus all the applied patches when
there is a patch failure.
Submitted by: sobomax
Reviewed by: the ports list
(5) Insert a few more "cd ${.CURDIR}"s so things will work even if
/usr/obj${.CURDIR} exists.
Reviewed by: the ports list
(6) Make implementation of XFREE86_HTML_MAN a little more streamlined.
Reviewed by: the ports list
Reviewed by: the ports list
(1) Add PORTREVISION and PORTEPOCH, which are both optional, to
PKGNAME. PKGNAME is now defined as
${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}[_${PORTREVISION}][,${PORTEPOCH}]
PORTREVISION denotes some FreeBSD internal change to the port that
requires the user to upgrade it. A security fix or a shared
library version change will be valid reasons to change (or define)
PORTREVISION.
PORTEPOCH is used to re-sort versions that is screwed up by the
author. PORTEPOCH is sorted before all other fields for the
purpose of determining which version is newer than the other.
Submitted by: kris
(2) Add fetch-recursive and fetch-recursive-list. These are like
fetch and fetch-list but they also descend into dependencies.
While I'm here, clean up some internal target names and comments.
Requested by PR: 12548
(2') Fix bug in fetch-list I introduced in rev 1.347.
(3) Add new variables LINUXBASE, USE_LINUX and USE_LINUX_PREFIX.
LINUXBASE defaults to /compat/linux and will be the default PREFIX
if USE_LINUX_PREFIX is defined. USE_LINUX, which is also implied
by USE_LINUX_PREFIX, will add a runtime dependency to the
emulators/linux_base port.
Approved by: marcel
(4) Include bsd.python.mk when USE_PYTHON and PYTHON_VERSION are defined.
Submitted by: tg
(5a) Change USE_FREETYPE to always depend on print/freetype -- it
turns out that XFree86-4-libraries only used freetype internally
and didn't install the libraries nor headers.
Submitted by: Taguchi-san (XFree86-4-* maintainer)
(5b) Change USE_MESA to lib-depend on GLU.1:graphics/Mesa3 when
XFREE86_VERSION=4. The Mesa port has been changed to only
install components missing from the XFree86 distribution when
XF8V=4.
Submitted by: sobomax
(5c) New variable XFREE86_HTML_MAN, which defaults to "no" when XF8V=3
or USE_IMAKE is not defined, and "yes" when XF8V=4 and USE_IMAKE
is defined. When this variable's value is "yes", generate-plist
will add html-ified manpages to the generated PLIST.
Approved by: Taguchi-san
(6) Allow user to override MD5_FILE.
Requested by: many
(7) Small message change: "...doesn't seem to exist on this system" ->
"... to exist in ${_DISTDIR}".
Requested by: some mail in the mailing lists...can't remember which ;)
be used inside Makefiles for testing.
Submitted by: sobomax
(2) Use newly added /etc/mtree/BSD.x11-4.dist when XFREE86_VERSION=4.
Requested by: taguchi@tohoku.iij.ad.jp
(3) Re-enable MASTER_SITE_OVERRIDE and MASTER_SITE_BACKUP
functionalities by making MASTER_SORT ignore them (i.e., leave
*_OVERRIDE at the beginning and *_BACKUP at the end). As a side
effect, there are new targets "master-sites" and "patch-sites"
that will print out the correctly sorted versions of said lists.
Reviewed by: the ports list
(3') Sort patch sites too, not only master sites.
Reviewed by: the ports list
(4) New target "deinstall-depends" which will do a "make deinstall" in
all ports this one depends on.
(4') Only run pkg_delete from the deinstall target when package
exists, to avoid "no such package installed" errors.
REQUIRES_MOTIF case, so it won't picking up unneeded xpm
dependencies when XFree86-4 is being used.
(2) New variable MOTIF_OPEN which depends to x11-toolkits/open-motif
instead of commercial variants. This is for testing only -- I
intend to replace the whole Motif hackery with a normal dependency
to open-motif when it is proved sufficient.
(3) Fix typo in XAWVER, I had the XFree86-3 and 4 cases backwards.
Submitted by: steve
(4) Add BUILD_DEPENDS to devel/imake-4 when USE_IMAKE is set and
XFREE86_VERSION=4. Otherwise ports won't be able to find imake.
Reported by: alex, among others
(5) Make USE_XPM, USE_DGS, USE_MESA and USE_FREETYPE imply USE_XLIB
when XFREE86_VERSION=4. Otherwise some ports can't find them.
(6) Add new target "pre-everything" that is called before fetch. Use
this (instead of pre-fetch or .BEGIN) if you want something to be
done before one of the normal targets are run. Switch perl
version check to use pre-everything, otherwise you can't even
build a 5-current index on a 4-stable machine (for instance).
(7) Add "ruby" to list of valid categories.
Requested by: knu
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
MASTER_SORT="foo.bar.co.jp bar.co.jp .jp" bsd.port.mk will try the
machine foo.bar.co.jp, then any machine in the domain bar.co.jp,
then any machine in the domain .jp. It might be useful for people
in an island (network-topologically speaking).
Submitted by: knu
Obtained from: NetBSD
(2) Deal with mtree's changing flags by looking at ${OSVERSION}
Submitted by: ache
(3) Don't generate code to try to erase an empty info/dir file if
NO_MTREE is set -- although it will probably never happen that
/usr/share/info/dir will be empty, it's still wasted code.
EMACS_NO_BUILD_DEPENDS, if set "YES" to this variable, port does not
build-depend on EMACS_PORT_NAME's emacsen.
EMACS_NO_RUN_DEPENDS, if set "YES" to this variable, port does not
run-depend on EMACS_PORT_NAME's emacsen.
Submitted by: markm (and many others)
(2) Move one PLIST_SUB line from the pre.mk section to post.mk section
so it won't cause unwanted side effects.
Spotted by: sobomax
especially XCONTRIB, SUNSITE, GNOME, CPAN, CTAN, COMP_SOURCES, and others.
The vast majority of the site hunting was my own work. However, KATO-san
submitted a number of Afterstep/Windowmaker sites I missed.
PR: 19378
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
INSTALL_SHLIBS is set, ldconfig is automatically called from
post-install and necessary @exec and @unexec lines are added to
PLIST.
Requested by: lioux@uol.com.br
Reviewed by: the ports list, in particular sobomax
(1a) Add
PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
to PLIST_SUB. These are needed by INSTALL_SHLIBS, but also could
be useful in general.
(2) Move master/mirror site definitions to bsd.sites.mk and include it
from bsd.port.mk. Open bsd.sites.mk to other committers.
Submitted by: reg
(2a) Add MASTER_SITE_SOURCEFORGE.
Submitted by: sobomax (who wrote SORCEFORGE, but I assume that's a typo :)
(2b) Move MASTER_SITE_LOCAL from ".../ports/distfiles/LOCAL_PORTS/" to
".../ports/local-distfiles/%SUBDIR%/" which will be mirrored from
peoples' ~user/public_distfiles on freefall. Add two mirrors
(Japan and Germany).
Requested by: obrien (moving)
Submitted by: will (German mirror)
(3) Simplify definition of PKGBASE since it can now be defined as
simply ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}, instead of
sed'ing out the version number from ${PKGNAME}.
Submitted by: hoek
(4) Remove unnecessary targets prefix and mtree-file, which can be
implemented as "make -V PREFIX" and "make -V MTREE_FILE",
respectively. Don't define MTREE_FILE when NO_MTREE is set so
"make -V MTREE_FILE" won't print out anything.
(5) Various minor typo and grammar fixes.
(6) Define NONEXISTENT?=/nonexistent. This will help quiet portlint
warnings, among other things.
support. Implies USE_AUTOCONF.
Submitted by: kiri@pis.toba-cmt.ac.jp
Reviewed by: ports
(2) New variable CONFIGURE_WRKSRC (default: ${WRKSRC}) to be set when
${CONFIGURE_SCRIPT} needs to be run in some place other than
${WRKSRC}.
Submitted by: Mario Ferreira <lioux@uol.com.br>
Reviewed by: ports
(3) Slight change in message about the port being too old for
bsd.port.mk due to missing PORTNAME/PORTVERSION. Explicitly say
that the user needs to update the port (although I'm not sure how
anyone can interpret the old message otherwise ;).
(4) Use NO_CHECKSUM instead of the undocumented FORCE_FETCH to
override the "distfile missing from files/md5" check. Also change
the NO_CHECKSUM message a bit more forceful ("If you are
absolutely sure...").
Submitted by: mharo
(5) Refer to the OpenSSL section in handbook by name, not number.
Approved by: Kris
PR: 17524
(6) New file bsd.emacs.mk that will be automatically be included if
EMACS_PORT_NAME is defined. bsd.emacs.mk sets various variables
to make maintenance of emacs ports easy.
Submitted by: shige
Reviewed (in spirit) by: ports, ports-jp
(7) Remove the automatic creation of ${PREFIX}/info/dir from
/usr/share/info/dir (install-info from 3.1R onwards automatically
creates the dir file if none exists). Delete ${PREFIX}/info/dir
upon deinstallation if it doesn't have any menu entries.
Reviewed by: ports
(8) Two new targets mtree-file and prefix. They print ${MTREE_FILE}
(empty if NO_MTREE is set) and ${PREFIX}, respectively. They are
used by package building scripts.
(9) Don't register package dependency in +REQUIRED_BY for
PKG_IGNORE_DEPENDS ports. Otherwise you'll end up with bogus
entries since "pkg_delete oneko" won't delete oneko from
XFree86/+REQUIRED_BY, etc.
Found by: bento
Submitted by: imura
(2) Don't complain about distfiles not listed in files/md5 if we are doing
"make makesum".
Reported by: mharo, cpiazza
Reviewed by: mharo
now required.
(2) Check whether a distfile is in files/md5 before fetching instead
of after. Also print out a distinct message so we can easily catch
someone screwing up the distfile list (usually via DISTNAME).
if ${.CURDIR} != ${MASTERDIR} (i.e., this is a slave port).
Suggested by: knu
(2) Move PKGNAME/DISTNAME definition into the pre.mk section so it can
be used in ports' Makefiles.
package name includes "language specifics" or "compilation options" as
specified in the handbook. PKGNAME is now defined as
${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
Suggested by: mharo (prefix), reg (suffix)
Reviewed by: the ports list
