There have some CONFLICTS which doesn't make sense and actually makes
it impossible to install/upgrade the TeX through portmaster/ports so
remove those CONFLICTS and update UPDATING accordingly.
PR: 262058
Reported by: alt2600@icloud.com
sysutils/intel-pcm-devel became quite obsolte once sysutils/intel-pcm is
now pretty much following a constant and stable update cycle, so users of
the -devel version are encouraged to switch to it.
If you still have sysutils/intel-pcm-devel installed, please delete it from
your system and install sysutils/intel-pcm instead:
# pkg delete sysutils/intel-pcm-devel
# pkg install sysutils/intel-pcm
- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version
- print/tex-basic-engines: Update version 20150521=>20210325
- print/tex-dvipdfmax: Update version 20150521=>20210325
- print/tex-dvipsk: Update version 5.995=>20210325.1
- print/tex-formats: Update version 20150521=>20210325
- print/tex-jadetex:
- print/tex-luatex: Update version 0.80.0=>1.12.0
* Convert to dynamic pkg-plist
- print/tex-ptexenc: Update version 1.3.3=>1.3.9
- print/tex-xetex: Update version 0.99992=>0.99993
* Convert to dynamic pkg-plist
- print/texlive-base: Update version 20150521=>20210325
- print/texlive-docs: Update version 20150521=>20210325
* Convert to dynamic pkg-plist
- print/texlive-full: Update version 20150521=>20210325
- print/texlive-texmf-source: Update version 20150521=>20210325
- print/texlive-texmf: Update version 20150521=>20210325
* Convert to dynamic pkg-plist
- print/texlive-tlmgr: Update version 20150521=>20210325
- print/xpdfopen: Transfer MAINTAINER to tex@ as xpdfopen is an
integral part of tex after poppler support has been deprecated from
tex [2]
- textproc/dblatex: Update version 0.3.11=>0.3.12
* Take MAINTAINERship
- textproc/gastex: Fix build
- textproc/metauml: Fix build
PR: 226983 [1]
Reported by: Trond.Endrestol@ximalas.info [1]
Reviewed by: tcberner (private repo)
Approved by: hrs (maintainer-timeout) [2]
Relnotes: https://tug.org/texlive/doc/texlive-en/texlive-en.html#news
Sponsored by: Nepustil.net
re: https://github.com/librenms/librenms/releases/tag/22.2.1
This port update skips over several releases.
See: https://github.com/librenms/librenms/releases
See UPDATING for details on storage directory which needs to
move to /var/db/librenms
LiberNMS wants to write to the %%WWWDIR%%/storage directory. To comply
with man 7 hier, this entry is now a symlink to /var/db/librenms/storage
Please adjust your filesystem accordingly.
The contrib directory has been removed from the upstream tarball. As such,
the port now installs the log rotation file to
/${PREFIX}/etc/newsyslog.conf.d/librenms.conf.sample
PR: 260085 261031
There are some cases at least when using ports/portmaster php8[01]
reinstalltion do not properly overwrite php.conf file omitting openssl
as a default module. Additionally if we are using pkg then
php8[01]-openssl needs to be manually removed otherwise both the old
module and builtin module tried to be loaded while restarting php-fpm
service.
This note defines these cases in UPDATING.
Reported by: dim
Sponsored by: Bounce Experts
After the 91fdbed776 commit fixing the
issue for MySQL80 introduced another problem for the ports that depends
on php8[01]-openssl port couldn't be built as the fix prevented
php8[01]-openssl from being installed as it's already built with
default php installation. As the problem has grown much bigger now and
php80 is currently the DEFAULT php version so we are switching the
behavior of php8[01] ports making the openssl module as default.
- Remove non-default OPTION MYSQL80 from lang/php8[01]
- Remove ports security/php8[01]-openssl
- Remove OPTION OPENSSL from lang/php8[01]-extensions
- Mark lang/php8[01] to IGNORE with libressl and libressl-devel
Although php builds fine with those most of the extensions do not
as they have dependency on curl. So mark it early.
- OPTIONIZE lang/php80
- Change openssl_DEPENDS to conditional for php74 only as this module
is default from php80 with this commit. php74 do not have the issue
where it fails to connect to MySQL80 due to new caching_sha2_password
- Remove hash_DEPENDS from php.mk as it is a default module for all php
- Change json_DEPENDS to conditional for php74 only as this module is
default from php80
PR: 261797 259793 252420
Reported by: sean@rogue-research.commartin@waschbuesch.de
Approved by: tz (private email) ale (private email)
Sponsored by: Bounce Experts
- update to 2.12.2
- switch to archivers/7-zip for extracting 7-Zip archives. Patch has
been discussed with upstream and is waiting to be committed.
https://gitlab.com/amavis/amavis/-/merge_requests/90
PR: 260866
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
libraries proposes, namely:
PyQt - devel/py-qt5-pyqt
PyQt-Charts - x11-toolkits/py-qt5-chart
PyQt-NetworkAuth – net/py-qt5-networkauth
PyQt-WebEngine – www/py-qt5-webengine
SIP – devel/py-sip
py-sip - devel/py-qt5-sip
PyQt-builder - devel/py-qtbuilder
Qscintilla - devel/py-qt5-qscintilla2
Reviewed by: diizzy, kde
Tested by: kai, rhurlin, arrowd, madpilot
Approved by: makc, tcberner, kde
Differential Revision: https://reviews.freebsd.org/D33237
Exp-run by: antoine
- 'pkg info php7\*' captures ports starting with portnames php74 only
while there are other ports like icingaweb2-php74 or nextcloud-php74.
This modification captures the later too.
Reported by: mfechner
* The default version of mail/bogofilter now uses LMDB instead
of Berkeley DB. It is not compatible and cannot read databases.
* bogofilter was renamed to bogofilter-bdb
* bogofilter-lmdb was renamed to bogofilter
* MOVED/UPDATING entries included.
- databases/xapian-bindings is a mata port which do not have
php:flavors and is unable to be MARKED to IGNORE as one of it's
dependent databases/php-xapian do not support php8.0. Hence this
creates a circular dependency and it fails to start bulk building. So
for now remove PHP from OPTIONS_DEFAULT.
PR: 260595
Approved by: ale portmgr(exp-run)
Sponsored by: Bounce Experts
- qemu-utils aka qemu-tools has now been merged as a flavor
within emulators/qemu.
- qemu-utils currently is a slave of qemu42 which has also been
DEPRECATED.
- Marked to EXPIRE on 2022-01-09 one day before qemu42
- Fix a typo in my previous UPDATING commit related to qemu5 [1]
PR: 260087 [1]
Reported by: grahamperrin@gmail.com [1]
Approved by: portmgr (blanket: infrastructure, compliance, sweeping)
- Has been updated to 5.2.0.
- This is the last version of 5.X.X branch of qemu and part of updating
emulators/qemu to latest 6.X.X branch.
- Added a stripped down version of qemu5-nox11 with FLAVORS
- Removed some reference to oszoo.org which no longer hosts qemu images
and is totally an irrelevent site
If a port depends on node, a simple:
USES= nodejs
can be added. It is also possible to define a specific version:
USES= nodejs:14
Use as current version the latest LTS version of node.
PR: 259783
Differential Revision: https://reviews.freebsd.org/D32790
Upgrade to the latest major vesrion of Node.js. Regenerate patches
since some have been adopted upstream, while others needed refreshing.
https://nodejs.org/en/blog/release/v17.0.0/
MFH: 2021Q4
Sponsored by: Miles AS
Removed CVS, GUI, PERFORCE and SUBVERSION options and also gui and svn
FLAVORS, and create 4 new subports:
devel/git-cvs
devel/git-gui
devel/git-p4
devel/git-svn
All these packages depend of devel/git and install only additional files
and manpages. This work is based on initial patch submitted by grembo@i
at review D30238.
PR: 251090
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32369
- Removed flavoring, upstream dropped gtk2 support, so the ports
are now gtk3 only
- Removed geany-plugin-multiterm that is gtk2 only and cannot work
with gtk3 only geany
- Use https scheme for main master site
* Add Long Term Support release of ClamAV
* Add CONFLICTS_INSTALL to security/clamav
* Add entry to UPDATING that explains
- Upstream changed their end-of-life policy and LTS release is
introduced
- How to switch from regular release (security/clamav) to LTS
release (security/clamav-lts)
Note about setting PORTEPOCH
In general new port should not set PORTEPOCH. But in this case it
should be set with following reason.
1. Recently upstream changed their end-of-life policy as following.
- Regular feature release (= 0.xyz.0 release) is released more
frequently, and life time of each feature release is shortened to
about 4 months.
- To compensate for the short lifetime of regular feature release,
Long Term Support feature release is introduced and its life time
is about 3 years.
2. First LTS starts with version 0.103.3 and it is same as current
version of security/clamav.
3. Because of short lifetime of regular feature release, it is
probable that not a few users of security/clamav want to switch to
security/clamav-lts after the latter is connected (and the former
is updated to 0.104.0).
3. For such users the entry is added to UPDATING about how to switch
from security/clamav to security/clamav-lts. And binary package
user is suggested to execute
`pkg set -o security/clamav:security/clamav-lts`. This command
changes the origin of already installed clamav packages. So user
can switch to LTS version without reinstalling.
4. But if PORTEPOCH isn't set in security/clamav-lts, binary package
user who executed above command will notice that version of
installed package (0.103.3,1) succeeds to current version of
security/clamav-lts (0.103.3). The situation doesn't change after
new patch release (0.103.4 for example) is released and it causes
the problem that installed package isn't properly upgraded with
`pkg upgrade`.
5. So PORTEPOCH is set in security/clamav-lts to prevent binary
package user from suffering from such problem.
To make it possible to easily import py-pyjwt v2.x move the current port
to a versioned directory. Bump consumers after rename of the dependency.
PR: 254038
It's not possible to restrict setuid bit to "video" group without also
breaking compositor nesting (e.g., hikari on sway). So, leave setuid
handling to a dedicated executable. seatd-launch works similar to
ck-launch-session by starting the daemon on demand.
Existing OPTIONs pull in too many dependencies -- Eigen is a template
library and doesn't **need** any of the libs -- and are overly-specific,
like requiring a particular BLAS implementation.
PR: 257321 251842
Reported by: alt2600@icloud.com
