exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0
Fix dissapearing cursor in xf86-video-vmware [2]
Stagify all x11@-owned ports
Bump portrevisions for xf86-* ports due to xserver version change.
Fix fallout from updates where needed.
Thanks to: all testersi, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/184684 [1], ports/181385 [2]
Submitted by: Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by: portmgr (bdrewery), core (jhb) [0]
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.
- updated libSM to 1.2.0,1
- updated libX11 to 1.4.4,1
- updated libXevie to 1.0.3
- updated libXext to 1.3.0_1,1
- updated libXfixes to 4.0.4
- updated libXi to 1.4.3,1
- updated libXinerama to 1.1.1,1
- updated libXp to 1.0.1,1
- updated libXpm to 3.5.9
- updated libXrandr to 1.3.2
- updated libXrender to 0.9.6
- updated libXres to 1.0.5
- updated libXtst to 1.2.0
- updated libXv to 1.0.6,1
- updated libXxf86dga to 1.1.2
- updated libXxf86misc to 1.0.3
- updated libXxf86vm to 1.1.1
- updated xdbedizzy to 1.1.0
- updated xdm to 1.1.10
- updated xf86dga to 1.0.3
- updated xf86driproto to 2.1.1
- updated xfd to 1.1.0
- updated xfindproxy to 1.0.2
- updated xfwp to 1.0.2
- updated xinit to 1.3.1
- updated xkbcomp to 1.2.3
- updated xkeyboard to config-2.1
- updated xlsatoms to 1.1.0
- updated xmag to 1.0.4
- updated xman to 1.1.2
- updated xorg to cf-files-1.0.4
- updated xrefresh to 1.0.4
- updated xrx to 1.0.4
- updated xsm to 1.0.2
- updated xwud to 1.0.3
- fix final line in pkg-descr
- add license where appropriate
- remove two patches in libX11 which are no longer required
Reviewed by: kwm
Approved by: bapt (mentor)
Obtained from: xorg-devel repo
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
- Remove CONFIGURE_TARGET hack in various bsd.*.mk
- USE_GNOME=gnometarget is now an no-op
Changes to individual ports, other than removing the CONFIGURE_TARGET hack:
= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
- comms/gnuradio
- science/abinit
- science/elmer-fem
- science/elmer-matc
- science/elmer-meshgen2d
- science/elmerfront
- science/elmerpost
= use x86_64 as ARCH
- devel/g-wrap
= other changes
- print/magicfilter
GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf
Total # of ports modified: 1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)
PR: 126524 (obsoletes 52917)
Submitted by: rafan
Tested on: two pointyhat 7-amd64 exp runs (by pav)
Approved by: portmgr (pav)
