amount of work by the FreeBSD GNOME Team and our testers.
On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE. This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed. The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily. We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.
Back to GNOME 2.16. This release brings a huge amount of new functionality
to FreeBSD. The standard release notes can be read at
http://www.gnome.org/start/2.16/ . But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD. This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.
But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:
Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>
Enjoy!
Approved by: portmgr (implicit, kris)
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
for example:
Incorrect: (Without USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.local.dist <-- Here...
================================
Correct: (With USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist <-- Here...
================================
- Change a several of *-reference ports to install in LOCALBASE instead
X11BASE, but only two gtkmm*-reference couldn't be change at the moment.
Bump the PORTREVISION for change prefix.
Discussed with: marcus
applications to not pick up their default configuration values unless
gconfd-2 was manually restarted. Now:
- gconftool-2 --makefile-{install|uninstall}-rule will send a SIGHUP
to all the gconfd-2 processes.
- upon receipt of that SIGHUP, gconfd-2 will reload the database and
therefore pick up the added/removed schemas (note that the stock
gconfd-2 already reloaded the database when receiving a SIGHUP, but
only in the periodic cleanup which ran every 30 seconds; I've
modified it to reload the database immediately so that applications
can be started right after they have been installed).
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>
and new features. Don't believe me? Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.
DO NOT USE portupgrade by itself to upgrade to GNOME 2.12. Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh. This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.
In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen. The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>. His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.
The FreeBSD GNOME Team would lank to thank the following users for
their contributions to this release:
Matthew Luckie <mjl@luckie.org.nz>
ade
sajd on #freebsd-gnome
Caelian on #freebsd-gnome
mnag
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Mark Hobden <markhobden@gmail.com>
Sergey Akifyev <asa@agava.com>
Andreas Kohn
For more information on GNOME on FreeBSD, checkout
http://www.FreeBSD.org/gnome/. The 2.12 documentation will be
posted shortly.
The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall. However, a lot of
FreeBSD specific additions and fixes have been made. For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support. See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.
GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work. We would also like to thank our adventurous users that chose to
ride the walrus. We'd especially like to thank the following users that
provided patches for GNOME 2.10:
ade
Yasuda Keisuke
Franz Klammer
Khairil Yusof
Radek Kozlowsk
And anyone else I may have accidentally omitted.
As with GNOME 2.8, 2.10 comes with a brand-spankin' new splashscreen
courtesy of Franz Klammer. However, unlike GNOME 2.8, we've included all
of the FreeBSD GNOME splashscreen entries with gnomesession. You can
use the deskutils/splashsetter port to choose the one you like best.
As always, GNOME users should _not_ use portupgrade alone to upgrade to
2.10. Instead, get the gnome_upgrade.sh script from
http://www.FreeBSD.org/gnome/gnome_upgrade.sh.
Enjoy!
Remove the post-install/pkg-install, since gnomehier is taking care of
it.
devel/gnomevfs2
Add pkg-install and pkg-deinstall to restore libgnome's gconf key if
libgnome's .schemas exists. This fix the plist complained by pointyhat.
Why restore libgnome's gconf key during the installtion if it exists?
Because, libgnome always depend on gnomevfs2 so make sure the libgnome
is still in the top when we either reinstall or upgrade gnomevfs2.
misc/gnomehier
Remove the etc/gconf/gconf.xml.defaults/*, since the gconftool is
taking care of it. ie: GCONF_SCHEMAS
x11/libgnome
Add pkg-deinstall to restore gnomevfs2's gconf key if gnomevfs2's
schemas exists. This fix the plist complained by pointyhat. Also, this
is a real fix for the weird keyboard problem when you uninstall
libgnome without reinstall it.
Bump the PORTREVISION in all of four ports above to fix everything with gconf
keys stuff for plist. Those have been tested in the MarcusCom CVS, GNOME
tinderbox, and my tinderbox.
This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.
This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team. The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).
Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD. We would
especially like to thank those users that provided patches for GNOME 2.7 and
2.8:
Franz Klammer <klammer@webonaut.com>
Piotr Smyrak <piotr.smyrak@heron.pl>
Radek Kozlowski <radek@raadradd.com>
Khairil Yusof <kaeru@pd.jaring.my>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Vladimir Grebenschikov <vova@fbsd.ru>
GNOME 2.8 also features a new, FreeBSD-specific splashscreen that
was designed by jimmac for GNOME 2.8, then daemonized by
Franz Klammer <klammer@webonaut.com> and Radek Kozlowski
<radek@raadradd.com>.
As with GNOME 2.6, you cannot just "portupgrade" to GNOME 2.8. There is
a script provided at http://www.marcuscom.com/downloads/gnome_upgrade28.sh
that will aid in the upgrade process. Full documentation on the GNOME 2.8
upgrade is coming following this commit.
From all of us at FreeBSD GNOME, ENJOY!
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
ever. It fixes many bugs, and adds some features missing in previous
FreeBSD ports. To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:
http://www.freebsd.org/gnome/docs/faq26.html
Please read it carefully. GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:
http://www.marcuscom.com/tinderbox/
The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts. We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.
Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
future plans, etc., please see http://www.gnome.org/start/2.4/.
This commit represents work done by adamw, bland, and myself as well as
many other contributers:
Koop Mast <einekoai@chello.nl>
Akifyev Sergey <asa@gascom.ru>
Franz Klammer <klammer@webonaut.com>
Øyvind Kolbu <oyvind@kebab.gaffel.nu>
Thomas E. Zander <riggs@rrr.de>
Jeremy Messenger <mezz7@cox.net>
Without these contirbuters, and our faithful users, GNOME 2.4.0 would not
be possible.
Please check the FreeBSD GNOME site for any FreeBSD gotchas, as well as
general FAQs and documentation (GNOME 2.4 updates to be posted soon). The
best way to upgrade so that you get all shared library dependencies is:
portupgrade -rf -m BATCH=yes atk
portupgrade -R -m BATCH=yes gnome2
Approved by: portmgr (kris, will, myself implicitly)
Requested by: re as well as many other users
