yet to hit the ports tree. However, some people have already started
using LyX-1.6.x on other systems and 1.5.7 is required for upward
compatibility with 1.6. So, here we are -- unfortunately, with teTeX
things like unusual paper-sizes are likely to come out wrong.
As soon as TeXLive is available, I'll upgrade the sibling-port print/lyx
from 1.4.x to 1.6.x directly.
2009-02-01 devel/subversion-devel: Use devel/subversion or devel/subversion-freebsd instead of this port
2009-01-19 devel/hs-hat: has been broken for more than 6 months
2009-01-19 devel/hs-hpl: has been broken for more than 6 months
2009-01-19 databases/mysqlbigram: has been broken for more than 6 months
2009-01-19 mail/claws-mail-clamav: has been broken for more than 6 months
2009-01-19 mail/sylpheed2-devel: has been broken for more than 6 months
2009-01-19 www/pecl-mnogosearch: has been broken for more than 6 months
2009-01-31 x11-fonts/mathfonts: This port was supported by Mozilla 1.8 (including Firefox 2.0) - to be replaced by STIX fonts for Firefox 3.x
2009-01-19 x11-wm/fluxspace: has been broken for more than 6 months
2009-01-31 x11-wm/expocity: project has been abandoned
2009-01-19 x11/bbuname: has been broken for more than 6 months
2009-01-19 security/squidclam: has been broken for more than 6 months
2009-01-19 print/virtualpaper: depends on broken, expired port
2009-01-19 print/ifhp: has been broken for more than 6 months
2009-01-19 net-p2p/peercast: has been forbidden for more than 6 months
2009-01-19 palm/pdbc: has been broken for more than 6 months
2009-01-19 net-mgmt/NeTraMet: has been broken for more than 6 months
2009-01-19 net-im/sulci: has been broken for more than 6 months
2009-01-19 multimedia/mjpegtools-yuvfilters: has been broken for more than 6 months
2009-01-19 multimedia/helixplayer: has been broken for more than 6 months
2009-01-19 lang/quack: has been broken for more than 6 months
2009-01-19 misc/pybliographer: has been broken for more than 6 months
2009-01-19 net/versuch: has been broken for more than 6 months
2009-01-19 net/py-mantissa: has been broken for more than 6 months
2009-01-19 net/libunpipc: has been broken for more than 6 months
2009-01-19 net/gnometelnet: has been broken for more than 6 months
2009-01-19 net/gacxtool: depends on expired, broken port
2009-01-19 devel/py-coro: has been broken for more than 6 months
2009-01-19 chinese/stardict2-dict-zh_TW: has been broken for more than 6 months
2009-01-19 x11-themes/gtk-industrial-theme: has been broken for more than 6 months
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
pkipplib is a Python library which can prepare IPP requests with the
help of a somewhat high level API. These requests can then be sent to
an IPP printer or print server (e.g. CUPS). This library can also parse
IPP answers received, and create high level Python objects from them.
WWW: http://www.pykota.com/software/pkipplib/
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet
PR: 125857 [1]
126993 [2]
130031 [3]
127399 [4]
127661 [5]
124302 [6]
129570 [7]
129936
123790
- Correct the path of snmp (lib -> libexec).
- Do not comment out the debugprint or it crashes when try to add printer from
samba.
Approved by: ahze (maintainer)
This can be exploited to crash the service by sending specially crafted
requests to the default port 2207/TCP.
PR: 129097
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by: maintainer
Security: http://www.vuxml.org/freebsd/37940643-be1b-11dd-a578-0030843d3802.html
PDF documents to the screen using Java2D.
Some features:
* view PDFs in your own app
* print-preview before exporting PDF files
* render PDFs to PNGs in a server-side web application
* view PDFs in a 3D scene
* draw on top of PDFs and annotate them in a networked viewer
WWW: https://pdf-renderer.dev.java.net/
libHaru library. libHaru is a free, cross platform,
and Open Source library for generating PDF files.
WWW: http://pecl.php.net/package/haru/
PR: ports/129033
Submitted by: Wen Heping <wenheping at gmail.com>
environments. They make it possible to have a tabular that spans multiple
pages. Each page is its own tabular environment, thus the various parts may
have different widths.
WWW: http://www.ctan.org/tex-archive/macros/latex/contrib/supertabular/
PR: ports/126673
Submitted by: Jorge Niedbalski <niedbalski@gmail.com>
LaTeX files. It translates text formatting, tables, figures, and equations.
The resulting LaTeX files are quite readable and suitable for editing.
WWW: http://sourceforge.net/project/showfiles.php?group_id=22324
PR: ports/128041
Submitted by: Martin Dieringer <martin.dieringer at gmx.de>
with the long term goal of providing a suitable
replacement for PDF::Writer. It is being developed
under the auspices of the Ruby Mendicant project
with copious help from a number of mighty fine
contributors.
WWW: http://rubyforge.org/projects/prawn/
PR: ports/128455
Submitted by: wenheping at gmail.com
|Approximately 238 bugs have been fixed since version 8.62. Of particular note
|are robustness and performance improvements with large files, invalid PDF, and
|font handling.
|
|The major new feature of this release is multithreaded rendering. This can be
|requested by passing -dNumRenderingThreads=n on the command line. The input
|document is first parsed, and then each page is split into n bands which are
|rendered concurrently. This can provide a significant reduction in processing
|time on multi-core systems.
|
|Images are now always interpolated in their source colorspace. This improves
|correctness for XPS documents and avoids bypassing the custom color management
|callbacks for interpolated images. Interpolation and color management are both
|expensive operations, so this affects performance with large images. The effect
|can be positive or negative depending on the file and the target resolution. If
|performance is a problem, we suggest running with -dNOINTERPOLATION.
|
|Support for OpenPrinting Vector devices has been upgraded to version 1.0.
|
|There are two new devices in this release, both experimental. Behdad Esfahbod
|has contributed a cairo output device which uses the cairo graphics library to
|generate PDF, SVG, EPS, or PNG files, based on the requested filename
|extension. The svgwrite device directly outputs Scalable Vector Graphics, the
|W3C XML vector graphics format. Both support only vector art at this point;
|text and images will not be represented efficiently.
|
|Incompatible changes
|
|The maximum number of color components has been reduced to 8 (from 252) as a
|performance improvement. Eight is the largest number commonly used and the
|largest number for which we support continuous tone images. Users with special
|needs can restore the previous behavior by setting the
|GS_CLIENT_COLOR_MAX_COMPONENTS preprocessor symbol to the required number of
|components at compile time.
|
|The -Z: debugging option now uses 'realtime' instead of 'usertime' when
|reporting timing information on unix-like systems. This has always been the
|case on windows-like systems.
|
|Obsolete makefiles for the DesqView environment have been removed.
the \ifxetex boolean for testing whether the TeX-variant
XeTeX is being used for typesetting.
Also provides the \RequireXeTeX command which throws
an error if XeTeX is not the engine in use.
WWW: http://www.ctan.org/tex-archive/macros/generic/ifxetex/
PR: ports/127607
Submitted by: Martin Dieringer <martin.dieringer@gmx.de>
following way:
print/ghostscript-gnu -> print/ghostscript7
print/ghostscript-gnu-nox11 -> print/ghostscript7-nox11
print/ghostscript-gnu-commfont -> print/ghostscript7-commfont
print/ghostscript-gpl -> print/ghostscript8
print/ghostscript-gpl-nox11 -> print/ghostscript8-nox11
japanese/ghostscript-gnu-jpnfont -> print/ghostscript7-jpnfont
korean/ghostscript-gnu-korfont -> print/ghostscript7-korfont
* USE_GHOSTSCRIPT now supports a version number which the port
requires. The valid value is "7" or "8". If other value is
specified, value of WITH_GHOSTSCRIPT_VER is used.
* WITH_GHOSTSCRIPT_GNU has been removed in favor of
WITH_GHOSTSCRIPT_VER. The valid value of WITH_GHOSTSCRIPT_VER is
"7" or "8", and the default value is "8".
Approved by: portmgr (pav)
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
- Remove CONFIGURE_TARGET hack in various bsd.*.mk
- USE_GNOME=gnometarget is now an no-op
Changes to individual ports, other than removing the CONFIGURE_TARGET hack:
= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
- comms/gnuradio
- science/abinit
- science/elmer-fem
- science/elmer-matc
- science/elmer-meshgen2d
- science/elmerfront
- science/elmerpost
= use x86_64 as ARCH
- devel/g-wrap
= other changes
- print/magicfilter
GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf
Total # of ports modified: 1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)
PR: 126524 (obsoletes 52917)
Submitted by: rafan
Tested on: two pointyhat 7-amd64 exp runs (by pav)
Approved by: portmgr (pav)
| A critical vulnerability has been identified in Adobe Reader and
| Acrobat 8.1.2. This vulnerability would cause the application to
| crash and could potentially allow an attacker to take control of
| the affected system.
Security: CVE-2008-2641
Security: CVE-2008-0883
Security: http://www.adobe.com/support/security/bulletins/apsb08-15.html
- Font locking has been improved significantly. It is now less
prone to color bleeding which could lead to high resource
usage. In addition it now includes information about LaTeX
macro syntax and can indicate syntactically incorrect macros in
LaTeX mode.
- The license was updated to GPLv3.
- Support for the nomencl, flashcards and comment LaTeX packages
as well as the Icelandic language option of babel were added.
- Support for folding of math macros was added.
- Lots of minor bugs in features and documentation were fixed.
- IMPORTANT: Many of the new features in the 11.x series rely on
special properties in the variable `TeX-command-list' and will
not work if you customized this variable for a pre-11.5x
release of AUCTeX. If this is the case for you, please
re-initialize the variable by erasing the customization,
thereby setting the variable to the new default, and re-adding
your changes afterwards.
PR: ports/125737
interpreter for the PostScript page description language used by
laser printers.) For documents following the Adobe PostScript Document
Structuring Conventions, GSview allows selected pages to be viewed or
printed. Features include:
* Display and print PostScript and PDF files.
* View pages in arbitrary order (Next, Previous, Goto).
* Page size and Orientation are automatically selected from DSC
comments or can be selected using the menu.
* Print selected pages using Ghostscript.
* Convert pages to bitmap, PDF or PostScript.
* Selectable display resolution, depth, alpha.
* Single button zoom.
* Extract selected pages to another file.
* Copy display bitmap to clipboard, and save clipboard bitmap as BMP file.
* Add bitmap or user preview to EPS file (Interchange, TIFF or Windows
Metafile)
* Graphically select and show bounding box for EPS file.
* Extract bitmap preview or PostScript from DOS EPS file.
* Extract text or search for text.
* Can read gzip and bzip2 compressed PostScript and PDF files.
* On-line help.
* English, Catalan, Dutch, French, German, Greek, Italian, Russian,
Slovak, Spanish and Swedish languages.
PR: ports/125602
Submitted by: bf <bf2006a at yahoo.com>
- ${RUBY_SITEARCHLIBDIR} -> ${RUBY_SITEARCHLIBDIR:S/${PREFIX}/${LOCALBASE}/}
in the *_DEPENDS, that way it will finding correct file when I tweak the
PREFIX.
- NOPORTDOCS -> NOPORTEXAMPLES on example/demo/test files.
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.
x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------
graphics/cairo: Update to 1.6.4
-------------------------------------------------------
Firefox 3 needs it. We have updated most cairo binding ports too.
-------------------------------------------------------
graphics/poppler: Update to 0.8.3
-------------------------------------------------------
The shared libraries version have been changed. All ports that depend on
poppler have PORTREVISION bump. The graphics/py-poppler has been updated
to 0.8.1 to work with newer poppler better. As for the poppler-qt, there
is no shared library version change.
-------------------------------------------------------
www/firefox3 and gecko ports related: Update to 3.0 final
-------------------------------------------------------
The bsd.gecko.mk has been moved from www/mozilla/ to Mk/. You no longer
need to include bsd.gecko.mk/Makefile.common by manual. We are keeping it
in backward compatibility, so the rest ports won't be break. We haven't
add some other ports to have Firefox 3 support yet, so feel free to send
us patch or commit it by yourself (to committers). However, view in
bsd.gecko.mk for document.
-------------------------------------------------------
Approved by: portmgr (marcus)
- Use OPTIONS for driver selection.
- Split driver-specific procedure into files/Makefile.*
- Use configure script and Makefile.in.
- Fix installation directory of document files.
HTML, MathML, and (via LaTeX/dvips/ImageMagick) rasterized PNG images.
Input data is parsed and scrutinized for safety, and the output includes
an estimate of whether the code is simple enough that HTML rendering will
look acceptable.
WWW: http://www.mediawiki.org/wiki/Texvc
PR: ports/124607
Submitted by: Max Brazhnikov <makc at issp.ac.ru>
Society (AAS) journals
AASTeX is a LaTeX-based package that can be used to mark
up manuscripts for American Astronomical Society (AAS)
journals. AASTeX enables you to prepare manuscripts and
tables for electronic submission to The Astronomical Journal
(AJ) and The Astrophysical Journal (ApJ).
WWW: http://authors.iop.org/atom/help.nsf/LookupJournalSpecific/WebLatexGuidelines~AJ
PR: ports/123653
Submitted by: Koji Yokota <yokota@res.otaru-uc.ac.jp>
LaTeX2e class for submission to the scientific journal
Astronomy and Astrophysics.
In order to ensure the smoothest transition for both authors
and publishers, Springer-Verlag has kindly granted EDP
Sciences the permission to use the LaTeX macro package that
they developed for A&A Main journal.
Only minor changes have been incorporated between the
Springer class (1999) and the EDP Sciences class for the
new journal.
WWW: http://www.edpsciences.org/
PR: ports/123652
Submitted by: Koji Yokota <yokota@res.otaru-uc.ac.jp>
- DSC parser now respects the level of BeginDocument/EndDocument
- Possible segfault has been fixed
- Fixed bug #21239: Vlist.c produces garbage if International is set
- Fixed bug #21740: popup windows may partly invisible as not on the
screen
- The escape key is now working in more contexts
- The filename can optionally be shown insted of the title
- Fixed bug #23199: No error message for errors in opened file
- Got rid of non-free code.
Approved by: Conrad J. Sabatier (maintainer)
PR: ports/124187
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
tests -- according to LyX developers, they are not currently using the
self-tests themselves. When this improves, the bitrot we were trying to
patch will be fixed by them...
reorganization:
print/ghostscript-gnu -> print/ghostscript7
print/ghostscript-gnu-nox11 -> print/ghostscript7-nox11
print/ghostscript-gnu-commfont -> print/ghostscript7-commfont
print/ghostscript-gpl -> print/ghostscript8
print/ghostscript-gpl-nox11 -> print/ghostscript8-nox11
japanese/ghostscript-gnu-jpnfont -> print/ghostscript7-jpnfont
korean/ghostscript-gnu-korfont -> print/ghostscript7-korfont
and clean up Makefile of each port for the changes, and assign the
maintainers to doceng@.
Not hooked up to the build yet because it needs more fixes in
dependent ports and bsd.port.mk.
PR: ports/124157
- Use OPTION for driver selection.
- Revert bogus Japanese font support patch. This version already
supports Japanese TTF/OTF.
- Add more Asian fonts in cidfmap.
- Clean up Makfile.
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
There are incorrect CONFLICTS in multiple ports. E.g.:
contain two CONFLICTS= lines, the second line overrides the first one.
PR: ports/122851
Submitted by: Anatoly Borodin <anatoly.borodin@gmail.com>
bin/gsc, so make they conflict to each others
PR: ports/122792
Reported by: Anatoly Borodin <anatoly.borodin at gmail.com>
Approved by: Rob Zinkov <rzinkov@eden.rutgers.edu> (maintainer of lang/gambc)
