1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-05 01:55:52 +00:00
Commit Graph

33 Commits

Author SHA1 Message Date
David E. O'Brien
253c66d044 Change Id->FreeBSD. 1999-08-25 06:06:33 +00:00
Thomas Gellekum
25490e549c Forget about ${PREFIX}/include/giflib. 1999-05-27 07:32:49 +00:00
Stefan Eßer
c6161bba71 Upgrade KDE to Release 1.1.1. 1999-05-03 22:29:39 +00:00
Satoshi Asami
404feaf947 Portlint. 1999-02-28 21:32:01 +00:00
David E. O'Brien
732390dac1 MASTER_SITE_SUBDIR was broken. My choices in fixing were either go with
GZIP or BZIP2 distfiles.  I went with BZIP2.
1999-02-28 06:06:25 +00:00
Stefan Eßer
87bf3684b2 Remove extra argument to "configure" that had been committed by accident. 1999-02-08 22:30:01 +00:00
Stefan Eßer
dd6fe9e879 Upgrade to KDE 1.1 RELEASE. 1999-02-08 22:25:54 +00:00
Stefan Eßer
523f3928b7 Upgrade to KDE-1.1pre2 ... 1999-02-06 23:22:08 +00:00
Satoshi Asami
5114e2637e Adjust port Makefiles to new EXTRACT_* variable defaults. See log of
bsd.port.mk rev. 1.304 for details on the change.

The fix here is one of the following.

(1) Define USE_BZIP2 instead of BUILD_DEPENDS on bzip2 and redefining
    EXTRACT_* commands.

(2) Change ${EXTRACT_CMD} to ${TAR} when the command is obviously
    calling the "tar" command (i.e., arguments like "-xzf" are spelled
    out).

(3) If ${EXTRACT_CMD} is called directly with ${EXTRACT_BEFORE_ARGS},
    add ${EXTRACT_AFTER_ARGS} to the command line as well.

(4) If any of EXTRACT_CMD, EXTRACT_BEFORE_ARGS or EXTRACT_AFTER_ARGS
    is set, define the other two too.
1999-02-03 11:12:01 +00:00
Satoshi Asami
9c1703446b Add bzip2 dependency. They were missing in some kde*11 Makefiles. 1999-01-11 02:13:24 +00:00
Satoshi Asami
a949ff1e14 Make dependency lines point to right directories -- they were still
using the old names (without "11").
1999-01-08 09:54:21 +00:00
Stefan Eßer
8f11472006 Upgrade to the first pre-release of KDE 1.1.
This port requireat least s version 1.41 of the Qt library.
There will be an error reported by configure, if only an earlier
version is found, but no automatic port dependency exists (i.e.
the x11-toolkits/qt141 port has to be manually built and installed).

There may still be a problem with a missing -lXext in the kdesupport
port. This will be taken care of during the next few days, if the
problem still exists ...
1999-01-07 00:52:05 +00:00
Satoshi Asami
afaa25f0cc Mark these broken while Stefan works on an upgrade. 1999-01-06 05:42:38 +00:00
Brian Somers
66bbf9dad0 Elfify 1998-10-01 18:35:41 +00:00
Justin M. Seger
c94a576e69 Mark all KDE ports BROKEN for ELF. 1998-09-30 02:07:28 +00:00
Steve Price
dcf1287e4d giflib is now converted to ELF so remove regexp support. 1998-09-19 01:33:49 +00:00
Satoshi Asami
4dc064b0c5 jpeg is now converted to ELF so change LIB_DEPENDS lines accordingly.
(Note, since the shlib major didn't change this just removes the regexp
 support.)
1998-09-15 11:46:15 +00:00
Satoshi Asami
65edaaa1f5 Replace qt dependencies with USE_QT.
(Also, net/licq/Makefile: No need to define both HAS_CONFIGURE and
 GNU_CONFIGURE)
1998-08-12 06:29:36 +00:00
Satoshi Asami
5264cbceb5 Fix up dependencies for ports that moved into the x11-toolkits category. 1998-08-07 23:56:56 +00:00
Stefan Eßer
84377cc5f9 Change dependencies to accept Qt-1.33 if present,
but to build Qt-1.40 if no compiled Qt library can be found.
1998-07-23 20:52:04 +00:00
Stefan Eßer
7e131994b3 Upgrade to KDE Release 1.0 1998-07-19 17:47:47 +00:00
Stefan Eßer
3e413c8ba0 Mark as broken, will be upgraded to 1.0 within a few days. 1998-07-13 23:31:51 +00:00
Donald Burr
16570ecdca kdesupport is in ports/converters, not ports/x11. 1998-05-24 07:15:11 +00:00
Stefan Eßer
3a3c6fc58d Add library dependency on kdesupport 1998-05-22 22:36:51 +00:00
Stefan Eßer
fd274ed08a Upgrade to Beta-4.1 1998-05-09 18:07:21 +00:00
Justin M. Seger
18f33c0f93 Change JPEG shared library number to 9. This is to make sure that everyone
installs the version of the port that uses shared library number 9 and the
LIBRARY_VERSION set to the default.  Normally this is against our policy
(bumping the version number for minor things), however due to the major
problems caused with the upgrade, Satoshi and I decided that this was best.

Approved by:    asami
1998-05-04 20:23:32 +00:00
Satoshi Asami
c54edb5d31 Mark this port broken, it's left behind in the beta-4.1 upgrade and
no longer builds.
1998-04-29 08:30:44 +00:00
Justin M. Seger
b5544f1358 Switch remaining ports to use jpeg lib version 8.0. 1998-04-15 22:18:24 +00:00
Stefan Eßer
1ecf9ece5a Use $(MASTER_SITE_KDE) 1998-03-06 19:52:23 +00:00
Satoshi Asami
96bc8eaf5f Bring over kdegames from x11. I'll go delete the other one after I
make sure this one is correct.

Requested by:	se
1998-02-17 07:12:19 +00:00
Satoshi Asami
ab4c4c3135 (1) Move the following ports out of x11/:
kdegames   -> games/
    kdenetwork -> net/
    kdesupport -> converters/
    kdeutils   -> misc/

    (Repository copy already done, dependency path and category name fixups
     is being done in this commit.)

(2) Add a virtual category "kde" and add all six (incl. x11/kde{base,lib})
    ports.

(3) Make package names follow the convention.

(4) Change "BUILD_DEPENDS=${X11R6}/bin/moc:..." to "...=moc:...".
    There is no need to specify the full pathname if the target is an
    executable in the standard path.  (Actually, as the same port is
    specified in LIB_DEPENDS, I think we can completely do away with
    this line but since Stefan added this explicitly, I assume there
    is a reason for it and left it alone.)

Approved by:	se (all but 4)
1997-11-05 04:20:23 +00:00
Stefan Eßer
53313e608c Add BUILD_DEPENDS on moc pre-processor.
Make LIB_DEPENDS accept both libjpeg.so.6.0 and 7.0, as
requested by TOYONAGA Tatsuto <toyonaga@msd.ts.fujitsu.co.jp>
1997-11-03 00:25:44 +00:00
Stefan Eßer
ce12cd4765 Initial import of the KDE games port (best Mahjongg ever, and have a
look at the Asteroids game ...
1997-11-02 11:29:32 +00:00