MASTER_SORT="foo.bar.co.jp bar.co.jp .jp" bsd.port.mk will try the
machine foo.bar.co.jp, then any machine in the domain bar.co.jp,
then any machine in the domain .jp. It might be useful for people
in an island (network-topologically speaking).
Submitted by: knu
Obtained from: NetBSD
(2) Deal with mtree's changing flags by looking at ${OSVERSION}
Submitted by: ache
(3) Don't generate code to try to erase an empty info/dir file if
NO_MTREE is set -- although it will probably never happen that
/usr/share/info/dir will be empty, it's still wasted code.
EMACS_NO_BUILD_DEPENDS, if set "YES" to this variable, port does not
build-depend on EMACS_PORT_NAME's emacsen.
EMACS_NO_RUN_DEPENDS, if set "YES" to this variable, port does not
run-depend on EMACS_PORT_NAME's emacsen.
Submitted by: markm (and many others)
(2) Move one PLIST_SUB line from the pre.mk section to post.mk section
so it won't cause unwanted side effects.
Spotted by: sobomax
especially XCONTRIB, SUNSITE, GNOME, CPAN, CTAN, COMP_SOURCES, and others.
The vast majority of the site hunting was my own work. However, KATO-san
submitted a number of Afterstep/Windowmaker sites I missed.
PR: 19378
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
INSTALL_SHLIBS is set, ldconfig is automatically called from
post-install and necessary @exec and @unexec lines are added to
PLIST.
Requested by: lioux@uol.com.br
Reviewed by: the ports list, in particular sobomax
(1a) Add
PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
to PLIST_SUB. These are needed by INSTALL_SHLIBS, but also could
be useful in general.
(2) Move master/mirror site definitions to bsd.sites.mk and include it
from bsd.port.mk. Open bsd.sites.mk to other committers.
Submitted by: reg
(2a) Add MASTER_SITE_SOURCEFORGE.
Submitted by: sobomax (who wrote SORCEFORGE, but I assume that's a typo :)
(2b) Move MASTER_SITE_LOCAL from ".../ports/distfiles/LOCAL_PORTS/" to
".../ports/local-distfiles/%SUBDIR%/" which will be mirrored from
peoples' ~user/public_distfiles on freefall. Add two mirrors
(Japan and Germany).
Requested by: obrien (moving)
Submitted by: will (German mirror)
(3) Simplify definition of PKGBASE since it can now be defined as
simply ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}, instead of
sed'ing out the version number from ${PKGNAME}.
Submitted by: hoek
(4) Remove unnecessary targets prefix and mtree-file, which can be
implemented as "make -V PREFIX" and "make -V MTREE_FILE",
respectively. Don't define MTREE_FILE when NO_MTREE is set so
"make -V MTREE_FILE" won't print out anything.
(5) Various minor typo and grammar fixes.
(6) Define NONEXISTENT?=/nonexistent. This will help quiet portlint
warnings, among other things.
support. Implies USE_AUTOCONF.
Submitted by: kiri@pis.toba-cmt.ac.jp
Reviewed by: ports
(2) New variable CONFIGURE_WRKSRC (default: ${WRKSRC}) to be set when
${CONFIGURE_SCRIPT} needs to be run in some place other than
${WRKSRC}.
Submitted by: Mario Ferreira <lioux@uol.com.br>
Reviewed by: ports
(3) Slight change in message about the port being too old for
bsd.port.mk due to missing PORTNAME/PORTVERSION. Explicitly say
that the user needs to update the port (although I'm not sure how
anyone can interpret the old message otherwise ;).
(4) Use NO_CHECKSUM instead of the undocumented FORCE_FETCH to
override the "distfile missing from files/md5" check. Also change
the NO_CHECKSUM message a bit more forceful ("If you are
absolutely sure...").
Submitted by: mharo
(5) Refer to the OpenSSL section in handbook by name, not number.
Approved by: Kris
PR: 17524
(6) New file bsd.emacs.mk that will be automatically be included if
EMACS_PORT_NAME is defined. bsd.emacs.mk sets various variables
to make maintenance of emacs ports easy.
Submitted by: shige
Reviewed (in spirit) by: ports, ports-jp
(7) Remove the automatic creation of ${PREFIX}/info/dir from
/usr/share/info/dir (install-info from 3.1R onwards automatically
creates the dir file if none exists). Delete ${PREFIX}/info/dir
upon deinstallation if it doesn't have any menu entries.
Reviewed by: ports
(8) Two new targets mtree-file and prefix. They print ${MTREE_FILE}
(empty if NO_MTREE is set) and ${PREFIX}, respectively. They are
used by package building scripts.
(9) Don't register package dependency in +REQUIRED_BY for
PKG_IGNORE_DEPENDS ports. Otherwise you'll end up with bogus
entries since "pkg_delete oneko" won't delete oneko from
XFree86/+REQUIRED_BY, etc.
Found by: bento
Submitted by: imura
(2) Don't complain about distfiles not listed in files/md5 if we are doing
"make makesum".
Reported by: mharo, cpiazza
Reviewed by: mharo
now required.
(2) Check whether a distfile is in files/md5 before fetching instead
of after. Also print out a distinct message so we can easily catch
someone screwing up the distfile list (usually via DISTNAME).
if ${.CURDIR} != ${MASTERDIR} (i.e., this is a slave port).
Suggested by: knu
(2) Move PKGNAME/DISTNAME definition into the pre.mk section so it can
be used in ports' Makefiles.
package name includes "language specifics" or "compilation options" as
specified in the handbook. PKGNAME is now defined as
${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
Suggested by: mharo (prefix), reg (suffix)
Reviewed by: the ports list
New variables:
PORTNAME - Base name of port
PORTVERSION - Version of port
Modified variables:
PKGNAME - Always ${PORTNAME}-${PORTVERSION}; error to override this
DISTNAME - Defaults to ${PKGNAME}
Right now old style is still accepted (unless REQUIRE_PORTNAME is
defined) but all port Makefiles will be converted this weekend and
bsd.port.mk will be changed again to have the new style be mandatory.
Reviewed by: the ports list, mharo in particular
(2) Change "clean" to be more generic -- it now has
pre-clean/post-clean helpers (it only had pre-clean before) and
the actual work is in do-clean so porters can redefine it if
necessary.
Requested by: "Matthew N. Dodd" <winter@jurai.net>
Reviewed by: dirk
after post-patch to before pre-patch.
Submitted by: reg (libtool maintainer)
(2) Misc. cleanup, pass MAKE_ENV to ${XMKMF}, etc.
Submitted by: reg
(3) Document ALL_TARGET and INSTALL_TARGET.
PR: 17334
Submitted by: Patrick Seal <patseal@hyperhost.net>
* You can now 'make search' from a ports subdirectory. This will
will restrict the search to ports within this subdirectory.
* Added an additional search option to search just the port names,
e.g. 'make search name=foo' will only return ports that have 'foo' in their
name.
Approved by: asami
Seconded by: a whole bunch of people, including Marcel, our linux-czar
(2) Fix typo in openssl messages.
Submitted by: Will Andrews <andrews@technologist.com>
4-current post bison-removal and to a no-op otherwise. Note this
should only be used when the software in question uses a feature
in bison that is not in byacc -- otherwise it should be patched to
use byacc (or detect the absense of bison correctly). [bsd.port.mk]
(2) Do not assume all category names are lowercase. In particular,
remove package links by removing them one by one, instead of doing
a "rm [a-z]*/${PKGNAME}.tgz". [bsd.port.mk]
(3) Do not assume the category name doesn't include a path separator
(/). Make links accordingly. [bsd.port.mk,README.category,README.port]
(4) Do not assume all category makefiles are directly under
${PORTSDIR}. [bsd.port.mk,README.category]
(5) Add new "package-name" target which prints out the directory name
to be used in the parent README.html. [bsd.port.subdir.mk]
(2) through (5) are in preparation for going to multi-level
categories. They shouldn't make any difference yet, but are committed
first so people can start testing.
(2) Add ipv6 and tcl/tk83 to list of valid categories.
Requested by: sumikawa, jseger
(2) Change OSVERSION for NEWGCC check to a more appropriate time for the
actual cutover.
(3) Change XFree86 version in PKG_IGNORE_DEPENDS from 3.3.5 to 3.3.6.
(4) Change some ${ECHO_MSG}'s in fatal errors to ${ECHO}, no need to be quiet
if there's something terribly wrong.
with directory names.
Submitted by: jdp
(2) Preserve +REQUIRED_BY file when FORCE_PKG_REGISTER is defined.
Reviewed by: steve
(3) Add new variable EXTRA_PATCHES, which can be set to some files
outside of ${PATCHDIR} (which usually means ${WRKDIR}). These
will be applied after distribution patches but before the normal
${PATCHDIR} patches.
Useful when you have dynamic patches.
(4) Move USE_QT2 earlier, the USE_NEWGCC dependency wasn't working
because it came after the USE_NEWGCC check. Move USE_QT alongside
new location of USE_QT2.
Submitted by: imura
(5) Substitute ftp.cdrom.com for ftp.funet.fi in MASTER_SITE_SUNSITE,
which no longer seems to be a full mirror anymore.
Submitted by: Ade Lovett <ade@lovett.com>
PR: 14221
(6) Fix typo in MASTER_SITE_FREEBSD case -- it used ${MASTER_SITES}
(instead of ${PATCH_SITES}) to fetch distribution patches. That
obviously would fail if the user attempted to build a port before
the distribution patches showed up at ftp.FreeBSD.org.
(7) Remove tcl75, tk41 and tk81 from the list of valid categories.
(tcl81 is still used.)
Submitted by: jseger
(8) Make delete-package-list a little more verbose by making it check
the existence of a package file and print out what it's doing.
Silence bogus warnings from delete-distfiles-list by redirecting
stderr from rmdir to /dev/null.
(9) Remove OpenBSD_MAINTAINER=imp, he hasn't been doing any work with
this file on the OpenBSD repository for a long time.
Submitted by: imp
Submitted by: many people
(2) Surround the perl describe target with an echo ``. We'll see if
it will help with the index corruption problems.
(3) Manpage handling fix to avoid command line too long errors for
ports with a lot of manpages.
Submitted by: hoek
Submitted by: cpiazza
Approved by: imura (qt2 maintainer)
(2) Add CC and CXX to MAKE_ENV if USE_NEWGCC is defined.
Suggested by: cpiazza
(3) Update XFree version PKG_IGNORE_DEPENDS.
(4) Add ${WHICH}=/usr/bin/which and use it.
Submitted by: Yoshiaki Sakae <sakae@is.titech.ac.jp>
(5) Update afterstep and windowmaker master sites.
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
(6) Add tcl82 and tk82 to list of valid categories.
Submitted by: A whole bunch of people
(7) Use .MAKEFLAGS, not DEPENDS_ARGS to pass FORCE_PKG_REGISTER to
submake when DEPENDS is defined -- the latter is too late.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
latest gcc. This is currently the system compiler in 4-current and
ports/lang/egcs in 3-stable.
Setting USE_NEWGCC is a no-op if the compiler required is in the
system. If it is to be provided by a port, it will cause the
variables "CC" and "CXX" to be set to the names of executables for
the C and C++ compiler, and adds a BUILD_DEPENDS on the
appropriate port.
Reviewed by: Chris Piazza <cpiazza@home.net> and Ade Lovett <ade@lovett.com>
(2) Add new variables CHMOD and CHOWN, set to full pathnames of those
commands. (Used in 3)
(3) When run as root, change owner:group of all files under ${WRKDIR}
to 0:0 after extraction. Set EXTRACT_PRESERVE_OWNERSHIP to turn
off this feature.
Problem reported by: Slawek Zak <zaks@prioris.im.pw.edu.pl>
Reviewed by: the ports list
(4) Update MASTER_SITE_XCONTRIB.
PR: 12879
Submitted by: Will Andrews <andrews@technologist.com>
(5) Update MASTER_SITE_GNU.
Submitted by: Ralf "pth update of the day" Engelschall <rse@engelschall.com>
(6) Add check for valid categories. If the port is not in a
pre-approved list of categories, install will fail. If you need a
local addition, put it in variable VALID_CATEGORIES.
Reviewed by: the ports list
(7) Experimental feature: DEPENDS_CLEAN. Define this variable and
bsd.port.mk will attempt to run "make install clean" instead of
"make install" when building dependencies. Might be useful if you
are building a port with a large number of dependencies without
the benefit of a large disk.
(1) Sort INDEX lines since with the new parallel patch, the lines can
come in out of order. (see 2)
Mk/bsd.port.subdir.mk:
(2) Make the targets parallelizable.
Submitted by: hoek
Reviewed by: steve, among others
Mk/bsd.port.mk:
(3) Serious speedup of bsd.port.mk startup. In particular, this helps
cut down "make index" time from an hour and a half to 8 minutes on
our system with a parallel make describe (see 2). Try to pass
unchanged variables down from parent makes instead of rerunning
commands to define them, etc.
Submitted by: hoek
Reviewed by: steve, among others
(4) Change a bunch of "FreeBSD.ORG"s and "freebsd.org"s to "FreeBSD.org".
(5) XFree86 is now at version 3.3.4.
(6) Update for gnome master sites.
Submitted by: mharo
(7) Remove old system tcl check, I don't think people with systems
from way back are still submitting ports.
(8) Fix comment on "make describe" line description (www site was missing).
${CONFIGURE_SCRIPT} fails, in an attempt to help debugging. It
could be a little verbose, but as my grandmother always used to
say, "you gotta be verbose in error logs".
(2) Roll back PERL_VERSION to 5.00502 in the 2.2 branch to give users
of that side a fighting chance.
(3) Don't check for ${_DISTDIR} in delete-distfiles-list; it's only
printing out commands anyway.
(4) Bump BSDPORTMKVERSION to accomodate perl version change (I know
it's late, but better late than never!)
port.
Submitted by: Jeremy Lea <reg@shale.csir.co.za>
(2) Automatically create ${PREFIX}/info/dir if it doesn't exist. Attempt to
do the same in PLIST.
Submitted by: Jeremy Lea <reg@shale.csir.co.za>
(3) Update perl version to 5.00503 to match system.
(4) Typo fix in MASTER_SITE_WINDOWMAKER.
Submitted by: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org>
(5) Reword the REQUIRES_MOTIF message to suggest the user to look at lesstif.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
(2) New variable USE_ZIP -- will change EXTRACT_SUFX to ".zip" and
extract commands/arguments accordingly.
Submitted by: jseger
(3) Use ${GREP} in some places where grep was used.
(4) A little update to the MASTER_SITES_GNU list.
Submitted by: cpiazza@home.net
(5) New target clean-for-cdrom-list and clean-restricted-list -- will
print out commands to delete un-cdromable or unredistributable
files. Save them into a shell script for later use.
(6) Add CXXFLAGS="${CXXFLAGS}" to configure's environment.
Submitted by: reg@shale.csir.co.za
PR: 11353 (part 3/3)
(7) Print out a warning if you try to install without being root.
Abort if ${PREFIX} is not writable.
(8) Add web site to INDEX as tenth field.
Reviewed by: wosch, steve, scrappy
