resultLength is smaller than the length needed to store the collation
key, ucol_getSortKey() sometimes does not obey resultLength and
overflows the result buffer...
- Plug a memory leak in the icu patch.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
for example:
Incorrect: (Without USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.local.dist <-- Here...
================================
Correct: (With USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist <-- Here...
================================
- Change a several of *-reference ports to install in LOCALBASE instead
X11BASE, but only two gtkmm*-reference couldn't be change at the moment.
Bump the PORTREVISION for change prefix.
Discussed with: marcus
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>
and new features. Don't believe me? Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.
DO NOT USE portupgrade by itself to upgrade to GNOME 2.12. Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh. This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.
In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen. The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>. His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.
The FreeBSD GNOME Team would lank to thank the following users for
their contributions to this release:
Matthew Luckie <mjl@luckie.org.nz>
ade
sajd on #freebsd-gnome
Caelian on #freebsd-gnome
mnag
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Mark Hobden <markhobden@gmail.com>
Sergey Akifyev <asa@agava.com>
Andreas Kohn
For more information on GNOME on FreeBSD, checkout
http://www.FreeBSD.org/gnome/. The 2.12 documentation will be
posted shortly.
The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall. However, a lot of
FreeBSD specific additions and fixes have been made. For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support. See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.
GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work. We would also like to thank our adventurous users that chose to
ride the walrus. We'd especially like to thank the following users that
provided patches for GNOME 2.10:
ade
Yasuda Keisuke
Franz Klammer
Khairil Yusof
Radek Kozlowsk
And anyone else I may have accidentally omitted.
As with GNOME 2.8, 2.10 comes with a brand-spankin' new splashscreen
courtesy of Franz Klammer. However, unlike GNOME 2.8, we've included all
of the FreeBSD GNOME splashscreen entries with gnomesession. You can
use the deskutils/splashsetter port to choose the one you like best.
As always, GNOME users should _not_ use portupgrade alone to upgrade to
2.10. Instead, get the gnome_upgrade.sh script from
http://www.FreeBSD.org/gnome/gnome_upgrade.sh.
Enjoy!
not check for a return of EDEADLK, thus causing certain threaded applications
to break (e.g. bmp) with libpthread.
This is slated to be committed in the next release of glib. See
http://bugzilla.gnome.org/show_bug.cgi?id=152009 for more details.
Submitted by: Pascal Hofstee <caelian@gmail.com>
Reviewed by: portmgr
Approved by: portmgr (implicit and no objections from linimon)
This new hack sets a default thread stack size of 1 MB (more in line with
Linux), but allows programmers to override that down to the minimum stack
size. This is subject to change again, but this is far better than the
hack that was previously in place.
be 256 KB instead of the default (64 KB on platforms other than ia64, and
256 KB on ia64).
This fixes some stack overflows seen in applications such as
gnome-cups-manager.
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
ever. It fixes many bugs, and adds some features missing in previous
FreeBSD ports. To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:
http://www.freebsd.org/gnome/docs/faq26.html
Please read it carefully. GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:
http://www.marcuscom.com/tinderbox/
The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts. We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.
Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
