http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet
PR: 125857 [1]
126993 [2]
130031 [3]
127399 [4]
127661 [5]
124302 [6]
129570 [7]
129936
123790
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.
This release would not have been possible without the contributions and
testing efforts of the following people:
Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
releases in that it focuses more on stability and functionality than on
new features. Not that it doesn't have its share of new and exciting
items. See http://www.gnome.org/start/2.18/ for all the goodies in
this release.
GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.
amount of work by the FreeBSD GNOME Team and our testers.
On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE. This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed. The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily. We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.
Back to GNOME 2.16. This release brings a huge amount of new functionality
to FreeBSD. The standard release notes can be read at
http://www.gnome.org/start/2.16/ . But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD. This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.
But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:
Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>
Enjoy!
Approved by: portmgr (implicit, kris)
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
for example:
Incorrect: (Without USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.local.dist <-- Here...
================================
Correct: (With USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist <-- Here...
================================
- Change a several of *-reference ports to install in LOCALBASE instead
X11BASE, but only two gtkmm*-reference couldn't be change at the moment.
Bump the PORTREVISION for change prefix.
Discussed with: marcus
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>
and new features. Don't believe me? Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.
DO NOT USE portupgrade by itself to upgrade to GNOME 2.12. Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh. This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.
In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen. The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>. His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.
The FreeBSD GNOME Team would lank to thank the following users for
their contributions to this release:
Matthew Luckie <mjl@luckie.org.nz>
ade
sajd on #freebsd-gnome
Caelian on #freebsd-gnome
mnag
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Mark Hobden <markhobden@gmail.com>
Sergey Akifyev <asa@agava.com>
Andreas Kohn
For more information on GNOME on FreeBSD, checkout
http://www.FreeBSD.org/gnome/. The 2.12 documentation will be
posted shortly.
The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall. However, a lot of
FreeBSD specific additions and fixes have been made. For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support. See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.
GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work. We would also like to thank our adventurous users that chose to
ride the walrus. We'd especially like to thank the following users that
provided patches for GNOME 2.10:
ade
Yasuda Keisuke
Franz Klammer
Khairil Yusof
Radek Kozlowsk
And anyone else I may have accidentally omitted.
As with GNOME 2.8, 2.10 comes with a brand-spankin' new splashscreen
courtesy of Franz Klammer. However, unlike GNOME 2.8, we've included all
of the FreeBSD GNOME splashscreen entries with gnomesession. You can
use the deskutils/splashsetter port to choose the one you like best.
As always, GNOME users should _not_ use portupgrade alone to upgrade to
2.10. Instead, get the gnome_upgrade.sh script from
http://www.FreeBSD.org/gnome/gnome_upgrade.sh.
Enjoy!
CJK TrueType fonts look prettier. Various enhancements like bold, italic,
readability, and embedded bitmap font help a CJK X desktop a great deal.
To enable this patchset, define WITH_CJK while building these ports (pango,
fontconfig, libXft, and freetype2).
PR: 73083
Submitted by: clive
Obtained from: Hamigua <hamigua at cuc.cn> (I think)
This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.
This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team. The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).
Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD. We would
especially like to thank those users that provided patches for GNOME 2.7 and
2.8:
Franz Klammer <klammer@webonaut.com>
Piotr Smyrak <piotr.smyrak@heron.pl>
Radek Kozlowski <radek@raadradd.com>
Khairil Yusof <kaeru@pd.jaring.my>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Vladimir Grebenschikov <vova@fbsd.ru>
GNOME 2.8 also features a new, FreeBSD-specific splashscreen that
was designed by jimmac for GNOME 2.8, then daemonized by
Franz Klammer <klammer@webonaut.com> and Radek Kozlowski
<radek@raadradd.com>.
As with GNOME 2.6, you cannot just "portupgrade" to GNOME 2.8. There is
a script provided at http://www.marcuscom.com/downloads/gnome_upgrade28.sh
that will aid in the upgrade process. Full documentation on the GNOME 2.8
upgrade is coming following this commit.
From all of us at FreeBSD GNOME, ENJOY!
and make XFREE86_VERSION map to it. XFREE86_VERSION is now deprecated.
- Make xorg the default X_WINDOW_SYSTEM on -current.
- Add several new X_*_PORT variables which point to various pieces of X11 based
on the setting of X_WINDOW_SYSTEM, and make ports use them.
- Add information to CHANGES about how to handle the transition.
PR: ports/68763
Approved by: portmgr (marcus)
Approved by: re (scottl)
ever. It fixes many bugs, and adds some features missing in previous
FreeBSD ports. To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:
http://www.freebsd.org/gnome/docs/faq26.html
Please read it carefully. GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:
http://www.marcuscom.com/tinderbox/
The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts. We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.
Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>