exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0
Fix dissapearing cursor in xf86-video-vmware [2]
Stagify all x11@-owned ports
Bump portrevisions for xf86-* ports due to xserver version change.
Fix fallout from updates where needed.
Thanks to: all testersi, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/184684 [1], ports/181385 [2]
Submitted by: Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by: portmgr (bdrewery), core (jhb) [0]
a kwm, zeising production:
MESA 9.1.6
Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first. See UPDATING for details.
PR: ports/181962 [2]
Submitted by: marius [1]
zeising [2]
Exp-run by: bdrewery
Approved by: portmgr (bdrewery)
Thanks to all who helped testing!
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
- updated libSM to 1.2.0,1
- updated libX11 to 1.4.4,1
- updated libXevie to 1.0.3
- updated libXext to 1.3.0_1,1
- updated libXfixes to 4.0.4
- updated libXi to 1.4.3,1
- updated libXinerama to 1.1.1,1
- updated libXp to 1.0.1,1
- updated libXpm to 3.5.9
- updated libXrandr to 1.3.2
- updated libXrender to 0.9.6
- updated libXres to 1.0.5
- updated libXtst to 1.2.0
- updated libXv to 1.0.6,1
- updated libXxf86dga to 1.1.2
- updated libXxf86misc to 1.0.3
- updated libXxf86vm to 1.1.1
- updated xdbedizzy to 1.1.0
- updated xdm to 1.1.10
- updated xf86dga to 1.0.3
- updated xf86driproto to 2.1.1
- updated xfd to 1.1.0
- updated xfindproxy to 1.0.2
- updated xfwp to 1.0.2
- updated xinit to 1.3.1
- updated xkbcomp to 1.2.3
- updated xkeyboard to config-2.1
- updated xlsatoms to 1.1.0
- updated xmag to 1.0.4
- updated xman to 1.1.2
- updated xorg to cf-files-1.0.4
- updated xrefresh to 1.0.4
- updated xrx to 1.0.4
- updated xsm to 1.0.2
- updated xwud to 1.0.3
- fix final line in pkg-descr
- add license where appropriate
- remove two patches in libX11 which are no longer required
Reviewed by: kwm
Approved by: bapt (mentor)
Obtained from: xorg-devel repo
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.
I would like to thank:
Beat Gaetzi
Dima Panov
Koop Mast
Eitan Adler
and all Testers.
PR: ports/147646
ports/148035
ports/148744
ports/150223
ports/152889
ports/154457
The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:
http://www.x.org/releases/X11R7.5/
A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.
For updating try
portupgrade -af \*
or:
portmaster -af
Please report any problems and issus to x11 (at) FreeBSD.org.
Thanks to beat@, rnoland@, fluffy@, stas@ and all testers for their help
and Feeback.
Tested by: Community and 2x exp-runs
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
X Video extension library
Testing is encouraged, but please do not use these ports as dependencies until
they are updated to release tarballs and the XFree86 ports have been updated to
depend on them.
