1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-05 01:55:52 +00:00
Commit Graph

1505 Commits

Author SHA1 Message Date
Pav Lucistnik
e13f00eca1 - Mark ports that have been broken for six month or more, or never compiled on
7.X and up, for removal in one month
2011-03-17 11:08:44 +00:00
Michael Reifenberger
48f390b942 Update to rev. 2883 2011-03-10 15:23:32 +00:00
Thierry Thomas
a75c0a02b7 Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.

As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.

PR:		ports/154736
2011-02-26 10:23:19 +00:00
Thierry Thomas
48883ba9ac Chase the upgrade of MPICH2.
Since I'm there, pet portlint where needed, e.g. by removing oblsolete
MD5 checksums.

PR:		ports/154715
2011-02-26 09:56:51 +00:00
Martin Wilke
9992960752 - Move over to python2.5 or higher
- While here kick md5
2011-02-24 23:25:54 +00:00
Pietro Cerutti
8b3ffd5b62 - New port: cad/meshlab
MeshLab is an open source, portable, and extensible system for the processing
  and editing of unstructured 3D triangular meshes.
  WWW: http://meshlab.sourceforge.net/
2011-02-14 07:44:02 +00:00
Hiroki Sato
fb124c40bf Update to 0.21.5. 2011-02-10 14:02:12 +00:00
Thierry Thomas
e92ef8c0aa Remove another extraneous patch.
Submitted by:	Stas Timokhin (maintainer)
Feature safe:	yes
2011-01-20 06:34:08 +00:00
Stanislav Sedov
afc2f9d0a9 - Update to 3.3.18.
PR:		ports/153569
Submitted by:	Steve Wills <steve@mouf.net>
Feature safe:	Yes
2011-01-11 23:59:17 +00:00
Thierry Thomas
17c5dec597 Remove an extraneous patch.
Submitted by:	maintainer
Reported by:	pointyhat via Pav
2011-01-07 23:04:14 +00:00
Hiroki Sato
c80e453cc1 Fix missing dependency.
Reported by:	pav
2011-01-06 21:39:37 +00:00
Hiroki Sato
c914a9bd8b - Fix style.
- Take maintainership.
2011-01-05 16:31:03 +00:00
Hiroki Sato
bc1e927983 Update to 3.00. 2011-01-05 09:41:45 +00:00
Hiroki Sato
b86e2000a0 Add cad/layouteditor, an IC/MEMS layout editor with the following features:
all angle, font generator, macros, boolean operations, design rule checker,
crossplatform compatible.  This supports Calma GDSII, OASIS (Open Artwork
System Interchange Standard), DXF, CIF (Caltech Intermediate Form).

WWW:	http://www.layouteditor.net/index.html
2011-01-05 07:58:25 +00:00
Thierry Thomas
998f56359b SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains Job manager module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:		ports/152396
Submitted by:	Stas Timokhin <devel at stasyan.com>
2011-01-04 21:15:54 +00:00
Thierry Thomas
d6df47c2d9 SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains NETGENPLUGIN module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:		ports/152396
Submitted by:	Stas Timokhin <devel at stasyan.com>
2011-01-04 21:14:34 +00:00
Thierry Thomas
e52f5a3c8f Update cad/salome* to 5.1.4.
Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for
         successful _run_.

PR:		ports/152396
Submitted by:	maintainer (Stas Timokhin)
2011-01-04 21:13:44 +00:00
Hiroki Sato
67e6a3984c Fix build (and some cosmetic changes). 2011-01-04 12:35:52 +00:00
Hiroki Sato
6ba4e9ba41 Update to 0.21.3. The release notes can be found at:
http://www.klayout.de/development.html#0_21_3
2011-01-04 12:20:07 +00:00
Wen Heping
5fb2d30c2f - Update to 1.5
- Add LICENSE
- Remove MD5

PR:		ports/153660
Submitted by:	Pedro Giffuni <giffunip@tutopia.com>
2011-01-04 01:03:03 +00:00
Thierry Thomas
94f67d3e03 Upgrade to 1.8.4. 2010-12-29 22:01:55 +00:00
Tilman Keskinoz
e49f341349 Update to 3.6.167
PR:		153485
Submitted by:	Armin Pirkovitsch
2010-12-28 12:55:52 +00:00
Philip M. Gollucci
f99fd40103 - Update to 7.18.0
- Remove MD5

PR:             ports/152959
Submitted by:   Erik Greenwald <erik@brlcad.org> (maintainer)
2010-12-13 04:25:36 +00:00
Pav Lucistnik
64a82765d1 - Fix for new tix
PR:		ports/153014
Submitted by:	maintainer
2010-12-11 21:03:36 +00:00
Thierry Thomas
a43e416289 Chase Tix upgrade and fix Tclx dependency. 2010-12-07 18:53:24 +00:00
Ade Lovett
4a8684e352 Sync to new bsd.autotools.mk 2010-12-04 07:34:27 +00:00
Pav Lucistnik
f78028c250 - Install additional files for salome
- Portlint

PR:		ports/152394
Submitted by:	Stas Timokhin <devel@stasyan.com>
Approved by:	Stephen Montgomery-Smith <stephen@missouri.edu> (maintainer)
2010-11-26 18:27:20 +00:00
Koop Mast
3680f27ebf Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
Bapt <baptiste.daroussin@gmail.com>
jsa@
miwi@
Sergio de Almeida Lenzi <lenzi.sergio@gmail.com>
Maxim Samsonov <xors@mne.ru>
Kris Moore

And pav@ for 2 exp-runs

PR:		ports/152255
		ports/143260
		ports/141033
		ports/149629
		ports/150350
		ports/151523
With hat:	gnome@
2010-11-20 15:37:08 +00:00
Marcelo Araujo
78b314c09c - Back to the ports@, I haven't used it anymore. 2010-11-15 00:14:28 +00:00
Stefan Walter
1e78193950 - Update cad/linux-eagle5 to 5.10 and transfer maintainership to submitter.
- Remove cad/linux-eagle (submitter is maintainer).
- Remove german/linux-eagle (submitter is maintainer).

PR:		151153
Submitted by:	Thomas Zander <thomas.e.zander@googlemail.com>
Approved by:	Michael Durian <durian@shadetreesoftware.com> (old maintainer)
2010-11-13 16:46:35 +00:00
Michael Reifenberger
956b4ec9ad Add missing Makefile.bzr_rev 2010-11-10 15:18:37 +00:00
Michael Reifenberger
21f73f76ac Switch to the launchpad repository
Update to rev. 2600.
2010-11-10 14:27:52 +00:00
Michael Reifenberger
3bd2ebb734 Add two patches from Joerg Wunsch:
- Implement autosave feature
- Detect filesystem full condition

Both patches where sent upwards.

Submitted by:	joerg@
2010-11-09 17:02:16 +00:00
Ade Lovett
6abd00a86b Punt autoconf267->autoconf268 2010-10-16 11:52:47 +00:00
Ade Lovett
b425f15e41 Migration of BROKEN ports from automake{19,110}->111 which will most
likely need to be looked at as and when they become unbroken.
2010-10-07 15:21:05 +00:00
Ade Lovett
7e80cde328 Round one migration of ports from automake{19,110} to automake111 2010-10-05 19:57:56 +00:00
Hiroki Sato
0ec8087ea5 Fix build in the NOPORTDOCS=yes case.
Spotted by:	QAT
2010-10-03 13:42:06 +00:00
Hiroki Sato
99561c1326 Fix build.
Spotted by:	erwin
2010-10-03 13:08:29 +00:00
Thierry Thomas
4d82e0c9d8 Host the distfile locally, to make it fetchable again.
Reported by:	pointyhat, via Erwin
2010-10-02 10:31:13 +00:00
Hiroki Sato
2cac3fbf0b Fix dependency and a style clean-up.
Spotted by:	QAT
2010-10-01 02:30:10 +00:00
Hiroki Sato
c1468ba35a Update to 3.0.5. 2010-09-30 19:09:10 +00:00
Hiroki Sato
9446be12c4 Update to 20100929. Changes include:
Features
--------

- PCB can directly import (forward annotate) schematics while running.
- Many places where measurements are entered now accept units, like
  "5mm", and "cm" and "in" are allowed too.
- Free Rotate Buffer added to menu
- Polygon Hole tool.
- F12 invokes the Lock tool.
- Russian translation added.
- DBUS is enabled by default when possible.
- Command-line exporters can run action scripts too.
- GTK tool tips on elements, pins, and nets.
- Command-line actions in GUIs do not require (,,) syntax.
- PCB can import footprints both in subdirectories and the named directories.
- New GCode exporter.
- Footprint files use ".fp" as the suffix; this is automatically
  searched for if needed.
- GTK dialogs do not show at startup unless requested.
- Stackup can be specified on the command line for command-line exporting.
- Reference card updated.
- The snap-point in pads is the center.
- The 's' key toggles polygons to clear/notclear all pads and pins

Bug Fixes
---------

- Various PNG export fixes.
- lesstif's magic toggle-layers-on-flip fixed.
- Arc bounding box math fixed.
- Fixed: sometimes, disabling silk also disabled the solder layer.
- "pcb --help" prints all options again
- Add mnemonic for "close without saving"
- Don't select silk on the back side when it's invisible.
- Various polygon rendering bugs fixed.
- PNG drill bloat export fixed.
- Attempts to change polygon clearance *on* polygons results in a hint.
- PNG doesn't segfault if not all graphic formats are supported.
- Various toporouter fixes and improvements
- HID_Mixed is supported in attribute dialogs
- Flipped rectangles in PS exports are drawn correctly.
- Optimizer removes micro-traces under pads.
- Vias, pins, and pads are now drawn under the mask instead of over.
2010-09-30 19:02:31 +00:00
Ashish SHUKLA
3edcad09c0 - Remove the workaround for LICENSE
Submitted by:	swell.k at gmail.com
Approved by:	pgj (mentor, implicit)
2010-09-28 13:07:47 +00:00
Thierry Thomas
3e6035661b Strictly depends on Gcc-4.4, even if the default FORTRAN compiler
depends on Gcc-4.5.

Submitted by:	Stas Timokhin <devel (at) stasyan.com> (maintainer)
2010-09-23 19:47:12 +00:00
Thierry Thomas
900bfacc02 Upgrade to 1.8.3 and depends on Tcl/Tk 8.5. 2010-09-16 21:23:17 +00:00
Ade Lovett
8262a7b51d Autotools update. Read ports/UPDATING 20100915 for details.
Approved by:	portmgr (for Mk/bsd.port.mk part)
Tested by:	Multiple -exp runs
2010-09-15 18:35:24 +00:00
Dmitry Marakasov
8ab2c962a1 - Fix fetch
Reported by:	QAT
2010-08-25 01:48:39 +00:00
Dmitry Marakasov
511b7bd219 - Update to 37
PR:		149027
Submitted by:	Sven Esbjerg <esbjerg@xbsd.net> (maintainer)
2010-08-24 17:47:47 +00:00
Hiroki Sato
e7df45b566 Add all 64-bit platforms to NOT_FOR_ARCHS for the moment to unbreak the port. 2010-08-21 15:51:52 +00:00
Thierry Thomas
de77289d35 Upgrade to 1.8.1. 2010-08-19 19:27:20 +00:00