1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-05 01:55:52 +00:00
Commit Graph

253387 Commits

Author SHA1 Message Date
Jordan K. Hubbard
2d6732d185 Add a pre-configure rule after all, since it's helpful to be able
to also run a rule before you apply patches and then go into the 3 stage
script configuration.  This bit Adam David in his dgd port.
Submitted by:	jkh
1994-08-25 22:59:56 +00:00
Jordan K. Hubbard
c0effa8901 Initial import for fvwm (version 1.23b) port.
Submitted by:	jkh
1994-08-25 21:04:07 +00:00
Jordan K. Hubbard
4a1e0eed43 Also `make Makefiles' in USE_IMAKE case to catch subdirs.
Submitted by:	jkh
1994-08-25 21:02:45 +00:00
Jordan K. Hubbard
6e4b9a7ee0 Sigh. I am a hosebrain. I've been using gmake for so long, I've
started using some of its features reflexively.
Submitted by:	jkh
1994-08-25 13:56:08 +00:00
Jordan K. Hubbard
4a6637715e Add a new flag: USE_IMAKE
This will cause the configure pass to do an `xmkmf' if set.
Submitted by:	jkh
1994-08-25 13:53:02 +00:00
Jordan K. Hubbard
ebb79839d4 Some cosmetic changes.
Add pre-{build,extract,install,...} targets for Torsten, who apparently
needs them.  Can't do effective post-* targets without major work, sorry.

						Jordan
Reviewed by:
Submitted by:
1994-08-24 14:49:33 +00:00
Jordan K. Hubbard
d960161e22 Add $Id$ lines to all the directory level Makefiles.
Submitted by:	jkh
1994-08-23 10:20:29 +00:00
Jordan K. Hubbard
955bad7797 Package files for sup. NOTE: I screwed up when I committed sup to utils/
since it should have been in net/.  Since not too many people are grabbing
ports yet I'm going to be nasty and relocate it in the repository.
Submitted by:	jkh
1994-08-23 10:14:21 +00:00
Jordan K. Hubbard
3e185f9cac Add the package files for tcsh. Got to put package files in for all
the ports I've done so far or I'll be a poor example to all the other
ports hackers! :-)
Submitted by:	jkh
1994-08-23 10:10:02 +00:00
Jordan K. Hubbard
e441ff3ff9 Ok, this should work with a centralized package directory now (so you
can elect to dump all finished packages in one directory).
Submitted by:	jkh
1994-08-22 13:25:33 +00:00
Jordan K. Hubbard
6715e4966e Make package target a lot more general.
Submitted by:	jkh
1994-08-22 13:11:32 +00:00
Jordan K. Hubbard
2d70035819 Update this for 19.25; no lib/emacs/lisp dir now.
Submitted by:	jkh
1994-08-22 13:04:06 +00:00
Jordan K. Hubbard
6fd441f32c Whoops - left out the package rule!
Submitted by:	jkh
1994-08-22 13:02:16 +00:00
Jordan K. Hubbard
24ef5fda73 Add package files to jove.
Submitted by:	jkh
1994-08-22 12:36:31 +00:00
Jordan K. Hubbard
557adabbf1 Add package files.
Submitted by:	jkh
1994-08-22 12:13:06 +00:00
Jordan K. Hubbard
a95feb2a45 Add the package files necesssary to bundle the sucker.
Submitted by:	jkh
1994-08-22 12:10:36 +00:00
Jordan K. Hubbard
dfcb81d26e Use proper proper package suffix.
Submitted by:	jkh
1994-08-22 12:07:19 +00:00
Jordan K. Hubbard
d2a18d9157 Whoops, left out a backslash in my package rule.
Submitted by:	jkh
1994-08-22 12:00:34 +00:00
Jordan K. Hubbard
52883f9a11 Import tcsh 6.05 for Geoff and friends.
Submitted by:	jkh
1994-08-22 11:52:42 +00:00
Jordan K. Hubbard
f9fe726441 Bring in ports/utils tree
Submitted by:	jkh
1994-08-22 11:31:58 +00:00
Jordan K. Hubbard
742e6c4d2a Change ports Makefiles to use bsd.port.subdir.mk
Submitted by:	jkh
1994-08-22 11:26:08 +00:00
Jordan K. Hubbard
1fb83c20bb Ok, now we warn if we're about to recreate the distfile from configured
sources.  Configuring doesn't always _do_ anything, which is why it's
a warning and not an error.
Submitted by:	jkh
1994-08-22 11:23:17 +00:00
Jordan K. Hubbard
3556b480df New bsd.port.subdir.mk file for use by ports. This groks all the
special ports building targets and will recurse properly.  Sorry,
Julian E - no fancy prompts, just recursion! :-)

Added a `bundle' target.  Purpose is as follows:

	You want to give someone a complete tree sans distfiles (for
	sticking on CDROM perhaps?) but the difficulty there is that
	the first time the user types `make clean', all the unpacked
	sources are gone again.  Typing `make bundle' recreates the
	original distfile if it can, so someone can "back up" their
	unpacked tree easily with one command.

	Whoops, just thought of something - it should warn if you
	configured the working source.
	Ok, next commit! :)
Submitted by:	jkh
1994-08-22 11:20:07 +00:00
Jordan K. Hubbard
72d8a92aca I had to bite the bullet: There's now a port.subdir.mk that does the right
thing with recursive build, configure, bundle or extract targets.
Reviewed by:
Submitted by:
1994-08-22 10:46:38 +00:00
Jordan K. Hubbard
d0451777b8 Add lang and x11 to SUBDIRS
Submitted by:	jkh
1994-08-21 19:15:42 +00:00
Jordan K. Hubbard
ffa7c10723 Bring in my little ports/x11 tree.
Submitted by:	jkh
1994-08-21 19:08:10 +00:00
Jordan K. Hubbard
46e60ea30e Bring in my little ports/lang tree.
Submitted by:	jkh
1994-08-21 19:07:45 +00:00
Jordan K. Hubbard
f32256d586 Sigh.. Some of these configs are a little hairy. I need to know the
${PORTSDIR} too now - pass it to any and all config scripts.
Submitted by:	jkh
1994-08-21 18:26:10 +00:00
Jordan K. Hubbard
1560b68cb8 Make things a little more user-friendly
Submitted by:	jkh
1994-08-21 17:42:24 +00:00
Jordan K. Hubbard
fac29d63ec Get the .configure_done stuff working - it wasn't in the right place.
Submitted by:	jkh
1994-08-21 16:55:54 +00:00
Jordan K. Hubbard
fa27825d53 Start really adding some features here. Let's see:
1. New variable DEPENDS lets you list packages that this depends on,
   relative to the top (lang/tcl, x11/tk, etc).  These packages will
   always get made first.

2. Don't configure again if you've already done so successfully.

3. Add pre-configure and post-configure hooks.  You can now do a pre-configure,
   a local configure, a port-provided configure and finally a post-configure
   if you really really want to.  I can't imagine anything this will leave us
   not being able to do! :) [ Yes, I have actually found a use for at least
   two of these in one port - see x11/tk!].

Submitted by:	jkh
1994-08-21 16:37:09 +00:00
Jordan K. Hubbard
8d967ac61b Adjust to new bsd.port.mk conventions for configuration.
Submitted by:	jkh
1994-08-21 15:09:47 +00:00
Jordan K. Hubbard
d64571e36c Simplify the whole configuration script business quite a bit. What
was I thinking before..
Submitted by:	jkh
1994-08-21 15:04:03 +00:00
Jordan K. Hubbard
17087d3bd7 Whoops, the check for a missing distfile was slightly bogus. Now it works.
Submitted by:	jkh
1994-08-21 14:32:40 +00:00
Jordan K. Hubbard
e1d94293b9 Make any local configuration file unconditional. That is, if one exists
then run it even if GNU configure is to be run later.
Submitted by:	jkh
1994-08-21 14:10:16 +00:00
Jordan K. Hubbard
7ca702f09f The start of the 2.0 ports collection. No sup repository yet, but I'll
make one when I wake up again.. :)
Submitted by:	jkh
1994-08-21 13:19:28 +00:00
Jordan K. Hubbard
d27f048e96 Commit my new ports make macros. Still not 100% complete yet by any means
but fairly usable at this stage.
Submitted by:	jkh
1994-08-21 13:12:57 +00:00