patches/. In addition, patches live in files/ and files/md5 is
moved to "distinfo" in main directory.
It is disabled by default, but you can test it by defining
NEWLAYOUT. I will convert the entire ports tree in a week and
make NEWLAYOUT the default.
Reviewed by: the ports list
Submitted by: nectar ("distinfo" name)
(2) Bump XFree86 version number in PKG_IGNORE_DEPENDS.
(3) New variable RESTRICTED_FILES to be used when only a subset of a
RESTRICTED or NO_CDROM port's distfiles/patchfiles list is not
redistributable. (Set RESTRICTED_FILES to the list of
redistribution-challenged files.)
Reviewed by: the ports list
Take over the maintainership from Yasuhiro Fukuma <yasuf@bsdclub.org>,
with his approval. I can never thank him too much for his previous
work which led me in the right direction! :)
lang/ruby:
- Add a patch for find.rb, which fixes the bug found after
1.6.1 was released.
databases/ruby-gdbm, */ruby-{tcltklib,tk}:
- Remove files/md5 and refer to lang/ruby's one.
Submitted by: kris
(2) Include bsd.ruby.mk if USE_RUBY and USE_LIBRUBY are defined.
Submitted by: ruby-czar knu
(3) USE_QT2 now uses qt22 instead of qt21.
Submitted by: will
(4) Typo: RUN_DEPENDS= -> RUN_DEPENDS+= in USE_LINUX.
Submitted by: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
(5) Add ${MTEE_FOLLOWS_SYMLINKS} to mtree arg. This is either "-L" or
undefined, so it will only change the behavior when mtree actually
has support for the flag.
Submitted by: ache
(6) Change nesting of .ifs around MOTIF_OPEN -- it used to be inside
PARALLEL_PACKAGE_BUILD. I don't know what I was smoking.
(7) Add new category french. Now the French have the same thing the
Germans have had for a while. :)
Requested by: Martin Blapp <mb@imp.ch>
(8) Add new virtual category zope.
Requested by: Neil Blakey-Milner <nbm@mithrandr.moria.org>
MASTER_SITES into bsd.sites.mk (MASTER_SITE_XFREE). Also add officially
announced by xfree http mirror. Following is the announcement.
[20 September 2000]
XFree86 nows offers http download access! This is a big story for those
who cannot download via ftp access because of proxy/firewall concerns.
This has been generously donated by the Computing Center of the University
of Applied Sciences in Esslingen, Germany. This is a full ftp mirror
repository which is updated hourly with a connection speed of 20 MegaBit.
in the log.)
Print oun out a warning when there is a setuid/gid program or a
startup script installed.
Submitted by: kris
(1') Print out directory correctly by substituting ${PREFIX} properly.
Submitted by: knu
(2) Now variable PERL_CONFIGURE, which runs Perl's Makefile.PL.
PR: 19241
Submitted by: Christian Weisgerber <naddy@unix-ag.uni-kl.de>
Reviewed by: markm, ache
(3) Print out distinctive message when forcefully trying BROKEN ports
on parallel build cluster. This is used by the errorlog parser to
put a tag for BROKEN ports.
Requested by: ade
(4) Print out name of failed patch plus all the applied patches when
there is a patch failure.
Submitted by: sobomax
Reviewed by: the ports list
(5) Insert a few more "cd ${.CURDIR}"s so things will work even if
/usr/obj${.CURDIR} exists.
Reviewed by: the ports list
(6) Make implementation of XFREE86_HTML_MAN a little more streamlined.
Reviewed by: the ports list
Reviewed by: the ports list
(1) Add PORTREVISION and PORTEPOCH, which are both optional, to
PKGNAME. PKGNAME is now defined as
${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}[_${PORTREVISION}][,${PORTEPOCH}]
PORTREVISION denotes some FreeBSD internal change to the port that
requires the user to upgrade it. A security fix or a shared
library version change will be valid reasons to change (or define)
PORTREVISION.
PORTEPOCH is used to re-sort versions that is screwed up by the
author. PORTEPOCH is sorted before all other fields for the
purpose of determining which version is newer than the other.
Submitted by: kris
(2) Add fetch-recursive and fetch-recursive-list. These are like
fetch and fetch-list but they also descend into dependencies.
While I'm here, clean up some internal target names and comments.
Requested by PR: 12548
(2') Fix bug in fetch-list I introduced in rev 1.347.
(3) Add new variables LINUXBASE, USE_LINUX and USE_LINUX_PREFIX.
LINUXBASE defaults to /compat/linux and will be the default PREFIX
if USE_LINUX_PREFIX is defined. USE_LINUX, which is also implied
by USE_LINUX_PREFIX, will add a runtime dependency to the
emulators/linux_base port.
Approved by: marcel
(4) Include bsd.python.mk when USE_PYTHON and PYTHON_VERSION are defined.
Submitted by: tg
(5a) Change USE_FREETYPE to always depend on print/freetype -- it
turns out that XFree86-4-libraries only used freetype internally
and didn't install the libraries nor headers.
Submitted by: Taguchi-san (XFree86-4-* maintainer)
(5b) Change USE_MESA to lib-depend on GLU.1:graphics/Mesa3 when
XFREE86_VERSION=4. The Mesa port has been changed to only
install components missing from the XFree86 distribution when
XF8V=4.
Submitted by: sobomax
(5c) New variable XFREE86_HTML_MAN, which defaults to "no" when XF8V=3
or USE_IMAKE is not defined, and "yes" when XF8V=4 and USE_IMAKE
is defined. When this variable's value is "yes", generate-plist
will add html-ified manpages to the generated PLIST.
Approved by: Taguchi-san
(6) Allow user to override MD5_FILE.
Requested by: many
(7) Small message change: "...doesn't seem to exist on this system" ->
"... to exist in ${_DISTDIR}".
Requested by: some mail in the mailing lists...can't remember which ;)
be used inside Makefiles for testing.
Submitted by: sobomax
(2) Use newly added /etc/mtree/BSD.x11-4.dist when XFREE86_VERSION=4.
Requested by: taguchi@tohoku.iij.ad.jp
(3) Re-enable MASTER_SITE_OVERRIDE and MASTER_SITE_BACKUP
functionalities by making MASTER_SORT ignore them (i.e., leave
*_OVERRIDE at the beginning and *_BACKUP at the end). As a side
effect, there are new targets "master-sites" and "patch-sites"
that will print out the correctly sorted versions of said lists.
Reviewed by: the ports list
(3') Sort patch sites too, not only master sites.
Reviewed by: the ports list
(4) New target "deinstall-depends" which will do a "make deinstall" in
all ports this one depends on.
(4') Only run pkg_delete from the deinstall target when package
exists, to avoid "no such package installed" errors.
REQUIRES_MOTIF case, so it won't picking up unneeded xpm
dependencies when XFree86-4 is being used.
(2) New variable MOTIF_OPEN which depends to x11-toolkits/open-motif
instead of commercial variants. This is for testing only -- I
intend to replace the whole Motif hackery with a normal dependency
to open-motif when it is proved sufficient.
(3) Fix typo in XAWVER, I had the XFree86-3 and 4 cases backwards.
Submitted by: steve
(4) Add BUILD_DEPENDS to devel/imake-4 when USE_IMAKE is set and
XFREE86_VERSION=4. Otherwise ports won't be able to find imake.
Reported by: alex, among others
(5) Make USE_XPM, USE_DGS, USE_MESA and USE_FREETYPE imply USE_XLIB
when XFREE86_VERSION=4. Otherwise some ports can't find them.
(6) Add new target "pre-everything" that is called before fetch. Use
this (instead of pre-fetch or .BEGIN) if you want something to be
done before one of the normal targets are run. Switch perl
version check to use pre-everything, otherwise you can't even
build a 5-current index on a 4-stable machine (for instance).
(7) Add "ruby" to list of valid categories.
Requested by: knu
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
MASTER_SORT="foo.bar.co.jp bar.co.jp .jp" bsd.port.mk will try the
machine foo.bar.co.jp, then any machine in the domain bar.co.jp,
then any machine in the domain .jp. It might be useful for people
in an island (network-topologically speaking).
Submitted by: knu
Obtained from: NetBSD
(2) Deal with mtree's changing flags by looking at ${OSVERSION}
Submitted by: ache
(3) Don't generate code to try to erase an empty info/dir file if
NO_MTREE is set -- although it will probably never happen that
/usr/share/info/dir will be empty, it's still wasted code.
EMACS_NO_BUILD_DEPENDS, if set "YES" to this variable, port does not
build-depend on EMACS_PORT_NAME's emacsen.
EMACS_NO_RUN_DEPENDS, if set "YES" to this variable, port does not
run-depend on EMACS_PORT_NAME's emacsen.
Submitted by: markm (and many others)
(2) Move one PLIST_SUB line from the pre.mk section to post.mk section
so it won't cause unwanted side effects.
Spotted by: sobomax
especially XCONTRIB, SUNSITE, GNOME, CPAN, CTAN, COMP_SOURCES, and others.
The vast majority of the site hunting was my own work. However, KATO-san
submitted a number of Afterstep/Windowmaker sites I missed.
PR: 19378
Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
INSTALL_SHLIBS is set, ldconfig is automatically called from
post-install and necessary @exec and @unexec lines are added to
PLIST.
Requested by: lioux@uol.com.br
Reviewed by: the ports list, in particular sobomax
(1a) Add
PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
to PLIST_SUB. These are needed by INSTALL_SHLIBS, but also could
be useful in general.
(2) Move master/mirror site definitions to bsd.sites.mk and include it
from bsd.port.mk. Open bsd.sites.mk to other committers.
Submitted by: reg
(2a) Add MASTER_SITE_SOURCEFORGE.
Submitted by: sobomax (who wrote SORCEFORGE, but I assume that's a typo :)
(2b) Move MASTER_SITE_LOCAL from ".../ports/distfiles/LOCAL_PORTS/" to
".../ports/local-distfiles/%SUBDIR%/" which will be mirrored from
peoples' ~user/public_distfiles on freefall. Add two mirrors
(Japan and Germany).
Requested by: obrien (moving)
Submitted by: will (German mirror)
(3) Simplify definition of PKGBASE since it can now be defined as
simply ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}, instead of
sed'ing out the version number from ${PKGNAME}.
Submitted by: hoek
(4) Remove unnecessary targets prefix and mtree-file, which can be
implemented as "make -V PREFIX" and "make -V MTREE_FILE",
respectively. Don't define MTREE_FILE when NO_MTREE is set so
"make -V MTREE_FILE" won't print out anything.
(5) Various minor typo and grammar fixes.
(6) Define NONEXISTENT?=/nonexistent. This will help quiet portlint
warnings, among other things.
support. Implies USE_AUTOCONF.
Submitted by: kiri@pis.toba-cmt.ac.jp
Reviewed by: ports
(2) New variable CONFIGURE_WRKSRC (default: ${WRKSRC}) to be set when
${CONFIGURE_SCRIPT} needs to be run in some place other than
${WRKSRC}.
Submitted by: Mario Ferreira <lioux@uol.com.br>
Reviewed by: ports
(3) Slight change in message about the port being too old for
bsd.port.mk due to missing PORTNAME/PORTVERSION. Explicitly say
that the user needs to update the port (although I'm not sure how
anyone can interpret the old message otherwise ;).
(4) Use NO_CHECKSUM instead of the undocumented FORCE_FETCH to
override the "distfile missing from files/md5" check. Also change
the NO_CHECKSUM message a bit more forceful ("If you are
absolutely sure...").
Submitted by: mharo
(5) Refer to the OpenSSL section in handbook by name, not number.
Approved by: Kris
PR: 17524
(6) New file bsd.emacs.mk that will be automatically be included if
EMACS_PORT_NAME is defined. bsd.emacs.mk sets various variables
to make maintenance of emacs ports easy.
Submitted by: shige
Reviewed (in spirit) by: ports, ports-jp
(7) Remove the automatic creation of ${PREFIX}/info/dir from
/usr/share/info/dir (install-info from 3.1R onwards automatically
creates the dir file if none exists). Delete ${PREFIX}/info/dir
upon deinstallation if it doesn't have any menu entries.
Reviewed by: ports
(8) Two new targets mtree-file and prefix. They print ${MTREE_FILE}
(empty if NO_MTREE is set) and ${PREFIX}, respectively. They are
used by package building scripts.
(9) Don't register package dependency in +REQUIRED_BY for
PKG_IGNORE_DEPENDS ports. Otherwise you'll end up with bogus
entries since "pkg_delete oneko" won't delete oneko from
XFree86/+REQUIRED_BY, etc.
Found by: bento
Submitted by: imura
(2) Don't complain about distfiles not listed in files/md5 if we are doing
"make makesum".
Reported by: mharo, cpiazza
Reviewed by: mharo
now required.
(2) Check whether a distfile is in files/md5 before fetching instead
of after. Also print out a distinct message so we can easily catch
someone screwing up the distfile list (usually via DISTNAME).
if ${.CURDIR} != ${MASTERDIR} (i.e., this is a slave port).
Suggested by: knu
(2) Move PKGNAME/DISTNAME definition into the pre.mk section so it can
be used in ports' Makefiles.
