1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-23 04:23:08 +00:00
Commit Graph

1635 Commits

Author SHA1 Message Date
Johann Visagie
afc010f63a Updating my email address in my remaining ports.
Prompted by:	vanilla
2001-06-27 10:15:01 +00:00
OKAZAKI Tetsurou
88f263f5c0 Add du2ps 2.1, filter for converting output of du to PostScript file.
PR:		27848
Submitted by:	Yoshihiko Sarumaru <mistral@imasy.or.jp>
2001-06-26 21:03:15 +00:00
Akinori MUSHA
9caf58e05d Update to 20010627. Enhance the behaviors of some flags:
-B CMD
    --beforebuild CMD	Run the sapecified command before each build.  If the
			command exits in failure, the port/package will be
			skipped.  Here is some typical uses:

			portupgrade -B 'cvs update' 'gnome*'

			portupgrade -aB 'test ! `make -V IS_INTERACTIVE`'

    -x GLOB
    --exclude GLOB	Exclude packages matching the specified glob pattern.
			Exclusion is performed after recursing dependency in
			response to -r and/or -R, which means, for example,
			the following command will upgrade all the packages
			depending on XFree86 but leave XFree86 as it is:

			portupgrade -rx XFree86 XFree86
2001-06-26 17:02:41 +00:00
Kevin Lo
147a4a2e5c Update to version 1.1.3
PR: 28422
Submitted by: MAINTAINER
2001-06-26 12:21:30 +00:00
Andrey A. Chernov
966c3a0792 Upgrade to 3.9.9 2001-06-25 05:11:41 +00:00
Dima Dorfman
c31622c1e6 Add readlink, a tool to dereference a symbol link and print the name
of the target.
2001-06-24 23:46:26 +00:00
Dima Dorfman
74aada477d Remove duplicate words where appropriate.
Approved by:	sobomax, obrien
2001-06-24 20:29:39 +00:00
Ben Smithurst
1acf2a18ce remove -g -O0, that was only for debugging... 2001-06-23 19:24:18 +00:00
Kevin Lo
8a15d7787a Update to version 1.1
PR: 28336
Submitted by: MAINTAINER
2001-06-23 14:38:21 +00:00
Akinori MUSHA
c74e098113 Update to 20010622, a maintenance release with better diagnostic
messages.
2001-06-22 14:53:14 +00:00
Akinori MUSHA
1dbfd9ba82 Add ruby-quota, a Ruby library to manipulate filesystem quotas. 2001-06-21 14:29:16 +00:00
Mario Sergio Fujikawa Ferreira
099338b1c8 - This patch is unnecessary for port version 0.84 added in rev 1.5
of Makefile
- Overlook on port update

PR:		28266
Submitted by:	Patrick Li <pat@databits.net>
2001-06-21 01:39:21 +00:00
Jimmy Olgeni
b8a5ba0954 Update modules: file, useradmin. 2001-06-19 21:04:28 +00:00
James E. Housley
150a7b6b49 Use proper syntax in chown
PR:		28263
Submitted by:	Patrick Li <pat@databits.net>
2001-06-19 01:48:35 +00:00
Ying-Chieh Liao
152af61e11 better etc file management
Submitted by:	olgeni
2001-06-17 17:34:34 +00:00
Jimmy Olgeni
c5c4c0d757 Add etc/ files management, and preserve etc/monitord.conf at "make install"
time (it was overwritten by the program's Makefile).
2001-06-17 17:26:49 +00:00
Akinori MUSHA
a86edf2a86 Whoops, 20010617 had an installation problem. 2001-06-17 11:43:11 +00:00
Akinori MUSHA
3eab80a70e Revise pkg-descr. 2001-06-17 10:12:43 +00:00
Akinori MUSHA
396b2f3afd Update to 20010617.
portupgrade:
  Add a new option: -N/--new.  If it is specified, portupgrade
  installs a new one when a specified package is not installed.

portinstall:
  New command equivalent to `portupgrade -N'.  You can specify a port
  origin to name the one you want to install, too:
    e.g. `portinstall shells/zsh'
2001-06-17 07:38:49 +00:00
Ying-Chieh Liao
8494d965b5 add management for etc files
Submitted by:	olgeni
2001-06-17 01:08:13 +00:00
Peter Pentchev
5d0e1ef13c Change maintainer's email address:
clefevre@citeweb.net -> clefevre@redirect.to

PR:		27867 (followup)
Submitted by:	maintainer
2001-06-16 13:58:39 +00:00
Jimmy Olgeni
af02b92da7 Update modules: lpadmin, useradmin, file. 2001-06-16 09:02:54 +00:00
David E. O'Brien
94f6e78181 Update to 4.56.4.
This fixes the fdescfs support in the latest 5-CURRENT (post FS /sys reorg).
2001-06-16 06:27:18 +00:00
David W. Chapman Jr.
2f64b67322 Update to version 1.45
Remove unneeded patch (patch-ae)
Add new locales in pkg-plist

PR:		27920
Submitted by:	maintainer
2001-06-16 04:54:12 +00:00
David E. O'Brien
03d252a698 Fix a typo that breaks the Makefile. 2001-06-16 02:10:56 +00:00
David E. O'Brien
d46da60024 LSOF's configure uses `FREEBSD_SYS' as a way to override /usr/src/sys as
the path to the kernel sources.  Make the port Makefile follow suit.

Submitted by:	dd
2001-06-16 00:06:56 +00:00
David E. O'Brien
92409f305d spell check 2001-06-15 23:57:14 +00:00
David E. O'Brien
478fe098ef Update to 4.56.3.
LSOF now *requires* a populated /usr/src if building on a machine using
devfs (ie, 5-CURRENT).  There is no other currently existing way for it
to get the information it needs.
2001-06-15 22:12:53 +00:00
Akinori MUSHA
a3b2597105 Update to 20010615.
This is a maintenance release.

  - Manpages provided.
  - Ports DB got faster.
  - Wording fixed.
  - New feature added to portsdb(1): you can use it to expand
    port/pkgname globs. (archivers/p5-*, zsh, gnome*, etc.)
2001-06-15 09:36:29 +00:00
Maxim Sobolev
1146dab36b Use ${PYTHON_SITELIBDIR} where appropriate. 2001-06-13 14:33:37 +00:00
Mark Pulford
961a5675c5 Add colorize 0.3.0, a robust log colorizer.
PR:		28113
Submitted by:	petef@databits.net
2001-06-13 07:19:08 +00:00
Jimmy Olgeni
c36088653f Update modules "useradmin" and "cron".
Remove unused WEBMIN_SERVER variable.
2001-06-12 22:34:55 +00:00
Anton Berezin
c8df88ddad Updated MAINTAINER to my new committer email address.
Do the same for pkg-descr files.

Approved by:	markm
2001-06-12 19:25:41 +00:00
Ying-Chieh Liao
20a9ea21d0 upgrade to 1.0.6
change master site & WWW
2001-06-12 06:55:10 +00:00
Brian Somers
4ea5ea75c1 Remove -O and -Wall from CFLAGS and use whatever's already there
Suggested by: will
2001-06-11 07:31:18 +00:00
Brian Somers
4a166800d8 Fix some option-parsing bugs (missing breaks)
Change sprintf -> snprintf
Change -O2 -> -O
2001-06-10 22:04:44 +00:00
Akinori MUSHA
aa878d3f24 Oops, wrong checksum. 2001-06-10 21:06:39 +00:00
Akinori MUSHA
da51098583 Update to 20010611, with many changes and enhancements.
Beware of bugs, just in case. ;)

portupgrade:
  - Sort packages by default and remove -s/--sort.
  - Rename -y/--yield/-Y/--yield-command to -s/--sudo/-S/--sudo-command.
  - Implement -a/--all.
  - Implement -x/--exclude=GLOB.
  - Exit on OptionParser::ParseError immediately.
  - Do not call "make fetch-recursive" but just "make fetch", now that
    portupgrade does recursion itself.
  - In fetch mode, specify -DPACKAGE_BUILDING for ports that define
    IS_INTERACTIVE. [Submitted by: Jimmy Olgeni <olgeni@uli.it>]]

portversion:
  - Exit on OptionParser::ParseError immediately.

portsdb:
  - New tool: which updates INDEX and INDEX.db in the ports directory.

pkgdepfix:
  - Implement origin fixer with intelligent guessing, finally!
    (-o/--fix-origin)
  - Make pkgdep guessing more intelligent.
2001-06-10 20:57:39 +00:00
Akinori MUSHA
05fdb110d3 Do not record @srcdir.
Submitted by:	Jimmy Olgeni <olgeni@uli.it>
2001-06-10 20:44:42 +00:00
David W. Chapman Jr.
3022bf4466 Add new port, Slay, a utility that kills a persons shell, as well as any process belonging to that user.
PR:		27704
Submitted by:	Jeff Palmer <scorpio@drkshdw.org>
Reviewed by:	keichii
2001-06-10 17:45:26 +00:00
Mario Sergio Fujikawa Ferreira
96184d3b55 - Update port to version 0.84
- Add windowmaker as secondary category
- Add NOPORTDOCS support to Makefile and PLIST
- Update WWW tag inside DESCR

Submitted by:	Patrick Li <pat@databits.net>
Approved by:	maintainer (timeout after 2 weeks)
2001-06-09 19:39:02 +00:00
Jimmy Olgeni
65af172a79 Chase distfile checksum. A diff with the previous release shows that only
some German related message files have been changed.

Noticed by:	Mars G Miro <mars@cannoncreek.com>
2001-06-09 11:47:52 +00:00
Akinori MUSHA
c2e939e56c Clarify that portupgrade can do upgrade by means of both the port and
the package.
2001-06-09 05:50:11 +00:00
Akinori MUSHA
b718988ce7 Change pkg_tarup to ${LOCALBASE}/sbin/pkg_tarup in RUN_DEPENDS.
Found by:	bento
2001-06-09 01:48:47 +00:00
Peter Pentchev
ed218409bd timelimit executes a command and terminates the spawned process
after a given time with a given signal.  A 'warning' signal
is sent first, then, after a timeout, a 'kill' signal, similar
to the way init(8) operates on shutdown.

WWW:		http://ringwraith.online.bg/devel/sys/timelimit/
Author:		Peter Pentchev <roam@orbitel.bg>
2001-06-08 23:07:13 +00:00
Mark Pulford
3246a363a8 Updated MAINTAINER to my new committer email address
Reviewed by:	will
2001-06-08 05:36:46 +00:00
James E. Housley
4ec1a59c35 Updates the msyslog port to the latest version: 1.04d
PR:		27856
Submitted by:	Anders Nordby <anders@fix.no>
2001-06-07 11:12:51 +00:00
Peter Pentchev
6403f1a2ba Maintainer address change: dom@myrddin.demon.co.uk -> dom@happygiraffe.net
PR:		27923
Submitted by:	maintainer
Reviewed by:	awk -F\| '$6 ~ /dom@myrddin/ {print $2;}' /usr/ports/INDEX ;)
2001-06-07 07:46:06 +00:00
Munechika SUMIKAWA
449dee5c9d URL was changed. 2001-06-07 06:06:16 +00:00
Akinori MUSHA
322fde13d1 Update to 20010607b.
portupgrade:
  - Change the meaning of -P/--use-packages.  If specified once, it
    uses packages whenever available or uses ports.  If specified
    twice, it never try to use ports but only uses packages.

  - The package directory is now specified via the environment
    variable, by PKGREPOSITORY and PKGREPOSITORYSUBDIR.

Print the usages to stdout instead of stderr.
2001-06-07 03:17:47 +00:00
Akinori MUSHA
ea9d950857 Update to 20010607.
portupgrade:
  - Implement -P/--use-packages, which everyone bugged me with. :>

pkgdepfix:
  - Add "delete" to the choices as to how to deal with a stale
    dependency.
  - Alter the prompt message.
  - Add zsh compdef.
2001-06-06 20:05:57 +00:00
Jimmy Olgeni
bb1e1d09c6 Update port to version 0.86, add better handling of BATCH in "make install"
and pkg_add, don't let setup.sh start the service. The setup script is now
automatically called when not installing in batch mode.

Also, "borrow" better pkg-plist implementation from the vim5 port: it
allows to have @execs at the end of pkg-plist (thanks to O'Brien :-))
2001-06-06 11:48:57 +00:00
Akinori MUSHA
d10d546f44 Update to 20010606b.
pkgdepfix:
  - Implement automatic guessing.
  - Add yes-to-all to the choices of yes/no prompt.
  - Do "stty sane" on interrupt.

portupgrade:
  - Backing up +REQUIRED_BY must have been done before pkg_delete.
    [Submitted by: SASAKI Katuhiro <sahiro@vanilla.freemail.ne.jp>]

Because of the portupgrade bug, portupgrade -u would have broken some
of your +REQUIRED_BY files.  Please fix them up with pkgdepfix.
2001-06-06 08:33:16 +00:00
Akinori MUSHA
3f909a39ff From now on I use release dates for this port's version numbers, and
this is version 20010606.

A new tool pkgdepfix is added.  It allows you to interactively fix
/var/db/pkg's @pkgdep / +REQUIRED_BY discrepancies.  Run this
periodically to let portupgrade properly trace dependencies.
2001-06-05 17:33:21 +00:00
Jimmy Olgeni
9875204ad6 Cosmetic only: make some layout fixes, make some commands silent. 2001-06-05 14:06:56 +00:00
Kevin Lo
7266ee393a Update to version 1.17
PR: 27871
Submitted by: MAINTAINER
2001-06-05 12:47:32 +00:00
Ruslan Ermilov
bdc8739080 mdoc(7) police: minor markup cleanup. 2001-06-04 13:21:46 +00:00
Doug Barton
c9191e35ba Beautify a little with an @, and correct the sed for PREFIX
to not include the trailing slash.
2001-06-04 02:34:08 +00:00
Poul-Henning Kamp
81e7224513 Add diskcheck-daemon.
With a small disk being 20GB these days, chances are pretty good that
an ailing sector will not be read while still being recoverable by
the drive.

Diskcheck daemon will read disks in the background at a low rate and
that way give the diskdrive a chance to detect and correct soft read
errors before they become hard errors.

Idea by:	phk
Written by:     ben
2001-06-03 20:02:03 +00:00
Akinori MUSHA
551a15f1e3 Update portupgrade to 1.42.
I think I have finally fixed the problem some people have seen that it
deletes a package registry in some cases!  At the same time, -m and -p
now works properly again.

Those problems were all due to Shellwords::shellwords' destroying its
given string.  Thanks to Tadayuki OKADA <tadayuki@mediaone.net> for
sending me a report that made me realize what the problem was.
2001-06-02 13:21:58 +00:00
Mario Sergio Fujikawa Ferreira
0d0a5e9461 - Install additional 3d objects
- Be verbose during installation
- Add PKGMESSAGE with run instructions

Submitted by:	maintainer
2001-06-02 04:12:13 +00:00
Akinori MUSHA
e9a5e89b99 De-typo (s/priviledge/privilege/g) with no PORTREVISION bump. 2001-06-01 15:17:01 +00:00
Akinori MUSHA
4fea95ebd9 Update portupgrade to 1.40. A bug with pkgdep has been fixed.
I'd like to call this a stable release, and take a rest for a while
until the next stable release. ;)
2001-06-01 12:22:06 +00:00
Akinori MUSHA
435ce6fdea Update portupgrade to 1.39.
* Fix file permissions and owners of replaced files.
* Stop raising a false alarm. (which was harmless, though..)
2001-06-01 11:28:38 +00:00
Akinori MUSHA
5ce67365d6 Update portupgrade to 1.36.
* No need to recurse @pkgdep search, really.
* Support the latest pkg_tarup.
* Backup +REQUIRED_BY a bit earlier, just in case.
* If it fails to copy the new +REQUIRED_BY to the package's dbdir,
  emit a message and save the file in TMPDIR.
2001-06-01 03:22:46 +00:00
Akinori MUSHA
26ed7e223c A package file can often be bigger than /tmp's capacity, so create
tarballs in TMPDIR if defined or /var/tmp when PKGREPOSITORY is not
defined.

Suggested by:	Jimmy Olgeni <olgeni@uli.it>
2001-06-01 03:08:43 +00:00
Akinori MUSHA
002a0185d3 Apply a hotfix against a critical bug that +CONTENTS are lost when you
do upgrade as root and TMPDIR and /var/db/pkg are on different
filesystems.
2001-05-31 15:18:00 +00:00
Jimmy Olgeni
80fb81f0c9 Update miniserv.pl: it could leave password information in the environment
of servers started by webmin.
2001-05-31 11:02:04 +00:00
Akinori MUSHA
caa8a3b243 Update to 1.34. Now it never tries to yield root priviledges
unless -y is specified.
2001-05-31 05:38:02 +00:00
Akinori MUSHA
a01e84a0c6 Update to 1.33. More operations need root priviledges. 2001-05-31 05:12:59 +00:00
Akinori MUSHA
bec4f9dede Update portupgrade to 1.31 and portversion to 1.7.
* Fix the Makefile/PKGNAME error detection.
  [Reported by:	Tadayuki OKADA <tadayuki@mediaone.net>]

* Implement -y/--yield which yields root priledges where needed.

* Implement -Y/--yield-command which specifies the command to yield
  root priledges. (default: sudo)
2001-05-31 03:32:59 +00:00
Maxim Sobolev
45fd345920 - Add windowmaker as a secondary category;
- install documentation.

PR:		27771
Submitted by:	maintainer
2001-05-30 19:34:49 +00:00
Akinori MUSHA
a47f237214 Update to portupgrade 1.29.
portupgrade:
	- Fix a bug that -s/--sort didn't work.  D'oh!
	- Make -u/--uninstall fail-safe.  It backs up old
	  installations with the help of pkg_tarup and restores on
	  installation failure.
        - Show option errors more gracefully.
        - Die on signals more gracefully.

portversion:
	- Show option errors more gracefully.
        - Die on signals more gracefully.
2001-05-30 07:00:21 +00:00
Mario Sergio Fujikawa Ferreira
4a31d9e168 New port: Window Maker dockapp that displays cpu load and a realtime
3d object

Submitted by:	Patrick Li <pat@databits.net>
2001-05-30 03:11:45 +00:00
Mario Sergio Fujikawa Ferreira
5cc2d360c5 - give maintainership to submitter
- update port to version 1.18
- add NOPORTDOCS support to PLIST
- be more minimalistic about patching, move some of the responsability
to CONFIGURE_ARGS

Submitted by:	Patrick Li <pat@databits.net>
2001-05-30 03:07:25 +00:00
Akinori MUSHA
459053e850 Update to 1.28 which fixes a bug when a package does not have @pkgdep
or +REQUIRED_BY.

Reported by: Jimmy Olgeni <olgeni@uli.it>

I'll debug harder next time.  Sorry for this. :(
2001-05-29 23:07:28 +00:00
Akinori MUSHA
a3b1fbaca7 Update to portupgrade 1.27.
Everything should now be fine while bug reports and thoughtful
suggestions are always welcome.
2001-05-29 22:21:34 +00:00
Akinori MUSHA
cbe50db5a9 Apply a hotfix to fix a couple of bugs/misfeatures. 2001-05-29 21:42:06 +00:00
Akinori MUSHA
5b36cf09a5 Update portupgrade to 1.26 and portversion to 1.4.
This is a milestone release for me.  Enjoy. :>

portupgrade changes:
  - Implement -s/--sort which sorts packages in the dependency order.
  - Implement -R/--upward-recursive, and get -r/--recursive working for
    upgrading as well. (Finally!)
  - Add -DBATCH to the make fetch' commandline to prevent ports from
    dumbly waiting for user input.

  Greatly inspired by: Jimmy Olgeni <olgeni@uli.it> (Thanks!!)

portversion changes:
  - Make command output optimal by using portupgrade's -s option.
  - Report possible ports' Makefile breakage.
2001-05-29 21:11:47 +00:00
Daniel Harris
0ed6d16f6e Add xin 1.0.0, splits standard input and pipes into a command.
PR:		27566
Submitted by:	Mark Pulford <mark@kyne.com.au>
2001-05-27 17:22:39 +00:00
Ying-Chieh Liao
58d856e60e upgrade to 1.1.5
PR:		27228
Submitted by:	maintainer
2001-05-27 12:48:45 +00:00
Ying-Chieh Liao
3373a1b524 add userlist
Prints a list of all usernames in /etc/passwd

PR:		27207
Submitted by:	Jamie Heckford <jamie@jamiesdomain.org.uk>
2001-05-25 19:59:17 +00:00
Ying-Chieh Liao
74ca402fb4 Fix port to build with XFree86 4
change maintainer

PR:		26730
Submitted by:	Anders Nordby <anders@fix.no> (new maintainer)
No response from:	old maintainer
2001-05-25 19:44:57 +00:00
Ying-Chieh Liao
6f98c77390 add maint
System maintenance package written in Python and CSH

PR:		27022
Submitted by:	Dale Weber <netman@dynaplex.net>
2001-05-25 19:09:53 +00:00
Mario Sergio Fujikawa Ferreira
69feeee703 1) Install leapsecs.dat (leapseconds support)
2) Add PKGMESSAGE with additional FreeBSD specific installation
   information
3) Install sample startup script
4) Bump PORTREVISION due to (1)

PR:		27617
Submitted by:	Vivek Khera <khera@kciLink.com>
2001-05-25 14:58:06 +00:00
Josef Karthauser
f1c80f1988 I'm looking after these ports for Andreas for a while so I've
changed the MAINTAINER line to an email alias that directs mail to
us both.
2001-05-24 20:34:27 +00:00
Jimmy Olgeni
733070f1ef Set the correct pathnames for the postgresql module in the default
configuration file.

Noticed by:	mi
2001-05-23 10:55:49 +00:00
Peter Pentchev
070526d073 Update to 1.8.
Submitted by:	fenner's distfile checking scripts
2001-05-22 17:30:44 +00:00
Ying-Chieh Liao
53e5daddca upgrade to 0.2.0
PR:		27513
Submitted by:	maintainer
2001-05-22 17:18:49 +00:00
Jimmy Olgeni
cadcbc7274 Updated modules: man, shell, mysql
* man

    A search that returns only one match will display a Location: line
    instead of going directly to the result.

* shell

    On Solaris, the path is not set correctly for commands entered, causing
    those outside /usr/sbin:/usr/sbin not to be found.

* mysql

    Clicking on a user, host, database, table or column privilege to edit
    it brings up the wrong record.

For the full change log, see http://www.webmin.com/webmin/updates.html.

I also removed the WITH_UPDATES option: updates are now installed by
default. The updates filenames have a proper version and revision number,
and when a new update comes out the port should no longer break because of
sudden md5 changes.

The WEBMIN_MODULES section now fits 80 columns.
2001-05-22 15:23:23 +00:00
Ade Lovett
d03692c58f Move gnomecanvas dependency from x11/gnomecore to
sysutils/gnomecontrolcenter.  Wierd stuff[tm] was happening
with the nightly build after the change that I missed.
2001-05-21 15:02:58 +00:00
Will Andrews
d9ea8a1921 Add msyslog 1.04b, a flexible and easy to integrate syslog daemon.
PR:		27308
Submitted by:	Anders Nordby <anders@fix.no>
2001-05-20 02:54:49 +00:00
Akinori MUSHA
1e3888f0dc Fix a rmdir line so it never fails.
Submitted by:	Jimmy Olgeni <olgeni@FreeBSD.org>
2001-05-18 14:20:15 +00:00
Akinori MUSHA
5c13f9369e Update to 1.25. 2001-05-17 18:23:40 +00:00
Ade Lovett
5ed28dbe7a SWitch maintainership of core GNOME ports to a small group of
committers (gnome@FreeBSD.org), since this is now definitely too big
for just one person.
2001-05-11 16:36:50 +00:00
Vanilla I. Shu
a7be7f3bb1 Upgrade to 1.4.
PR:		ports/26826
Submitted by:	maintainer
2001-05-11 16:34:25 +00:00
Ade Lovett
2268d85efb Update to 0.5.1 2001-05-10 19:34:48 +00:00
Vanilla I. Shu
bb0ddae530 Upgrade to latest version:
p5-Apache-MP3		=>	2.16
	p5-Convert-UUlib	=>	0.111
	p5-Email-Find		=>	0.03
	p5-GD			=>	1.33
	p5-HTML-Parser		=>	3.24
	p5-I18N-Charset		=>	1.08
	p5-I18N-LangTags	=>	0.20
	p5-MIME-Lite		=>	2.111
	p5-Set-Scalar		=>	1.09
	p5-Sort-ArbBiLex	=>	3.4
	p5-URI			=>	1.12
	p5-Unix-Syslog		=>	0.95

and change MAINTAINER to ports@FreeBSD.org:
	p5-Convert-UUlib
	p5-Unix-Syslog

Approved by:	maintainer
2001-05-10 09:34:24 +00:00
Peter Pentchev
5069db76e5 Almost revert a change made in daemontools-0.70's supervise, where
the one-second sleep between invocations was moved to after the actual
invocation.  This sleep could be interrupted by a SIGCHLD in the case
of a failing service, and the service could be restarted way more than
the documented once-per-second.  Move the sleep back before the fork(),
just don't sleep before the very first fork, so the service starts faster.

Silence by:	Daniel J. Bernstein (no telling if he'll fix this in later
		daemontools releases, so I guess we'll have to do it as part
		of our port..)
Approved by:	nbm (maintainer)
2001-05-10 07:10:24 +00:00
Mario Sergio Fujikawa Ferreira
af8f097b8f Add port WMMemMon version 0.1.0: Mem/Swap monitoring dockapp for
WindowMaker

Submitted by:	Patrick Li <pat@databits.net>
2001-05-10 03:37:17 +00:00