<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.
japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything. Just don't hide anything at all
like the textproc/scim configure script does.
multimedia/schroedinger: Apply an upstream patch.
textproc/scim-input-pad: Same as japanese/scim-honoka.
PR: 201922
Approved by: portmgr (antoine)
Exp-run by: antoine
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version. When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.
Also remove the devel/pcre dependency from USE_GNOME=glib20. It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it. The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20. Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.
PR: 195724
Exp-run by: antoine
Approved by: portmgr (antoine)
While here:
- Strip binaries
- Convert USE_BZIP2 -> USES=tar:bzip2
- Convert to USES=libtool
- Remove tests for gnopernicus as they badly track the dependencies they
needs and fails to build with non recursive ld(1)
- orca does not need pathfix at all
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
Bapt <baptiste.daroussin@gmail.com>
jsa@
miwi@
Sergio de Almeida Lenzi <lenzi.sergio@gmail.com>
Maxim Samsonov <xors@mne.ru>
Kris Moore
And pav@ for 2 exp-runs
PR: ports/152255
ports/143260
ports/141033
ports/149629
ports/150350
ports/151523
With hat: gnome@
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.
This release features commits by avl, ahze, bland, marcus, mezz, and myself.
The FreeBSD GNOME Team would like to thank Anders F Bjorklund for doing the
initual packagekit porting.
And the following contributors & testers for there help with this release:
Eric L. Chen
Vladimir Grebenschikov
Sergio de Almeida Lenzi
DomiX
walder
crsd
Kevin Oberman
Michal Varga
Pavel Plesov
Bapt
kevin
and ITetcu for two exp-run
PR: ports/143852
ports/145347
ports/144980
ports/145830
ports/145511
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
Other major improvements include an updated HAL with better volume
probing code, ufsid integration, and support for volume names containing
spaces (big thanks to J.R. Oldroyd); a new WebKit; updated AbiWord;
an updated Gimp; and a preview of the new GNOME Shell project (thanks to
Pawel Worach).
The FreeBSD GNOME Team would like to that the following additional
contributors to this release whose patches and testing really helped
make it a success:
Andrius Morkunas
Dominique Goncalves
Eric L. Chen
J.R. Oldroyd
Joseph S. Atkinson
Li
Pawel Worach
Romain Tartière
Thomas Vogt
Yasuda Keisuke
Rui Paulo
Martin Wilke
(and an extra shout out to miwi and pav for pointyhat runs)
We would like to send this release out to Alexander Loginov (avl) in
hopes that he feels better soon.
PR: 136676
136967
138872 (obsolete with new epiphany-webkit)
139160
134737
139941
140097
140838
140929
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet
PR: 125857 [1]
126993 [2]
130031 [3]
127399 [4]
127661 [5]
124302 [6]
129570 [7]
129936
123790
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.
This release would not have been possible without the contributions and
testing efforts of the following people:
Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
releases in that it focuses more on stability and functionality than on
new features. Not that it doesn't have its share of new and exciting
items. See http://www.gnome.org/start/2.18/ for all the goodies in
this release.
GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.
amount of work by the FreeBSD GNOME Team and our testers.
On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE. This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed. The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily. We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.
Back to GNOME 2.16. This release brings a huge amount of new functionality
to FreeBSD. The standard release notes can be read at
http://www.gnome.org/start/2.16/ . But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD. This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.
But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:
Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>
Enjoy!
Approved by: portmgr (implicit, kris)
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
for example:
Incorrect: (Without USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.local.dist <-- Here...
================================
Correct: (With USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist <-- Here...
================================
- Change a several of *-reference ports to install in LOCALBASE instead
X11BASE, but only two gtkmm*-reference couldn't be change at the moment.
Bump the PORTREVISION for change prefix.
Discussed with: marcus
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
