parallel port. It appears as a keyboard: buttons on the controllers send key
strokes to the operating system. snespp works under both the system console
and X windows, using the microseq interface to reduce overhead.
WWW: http://www.cse.unsw.edu.au/~tbourke/software/snespp.html
PR: ports/111721
Submitted by: Timothy Bourke <timbob at bigpond.com>
- Broken aRts sound driver now removed for good.
- Many fixes to the Quartz DLL sound support.
- File I/O performance improvements.
- The usual assortment of Direct3D fixes.
- Lots of bug fixes.
1. Add a check if linuxulator is (kld)loaded. IGNORE otherwise.
Before this commit the port compared compat.linux.osrelease with 2.4.2
and was IGNOREd if those values are equal. In case linuxulator
is *not* loaded, the port proceeded to install, to load linuxulator and
to use... compat.linux.osrelease=2.4.2!
The port as is doesn't proceed (without linuxulator loaded or
if compat.linux.osrelease is equal to 2.4.2) even for "make fetch".
Imho that's OK, because it won't let automated tasks to load
unneccessary distros, while a human administrator should know
what to do by hand. ;-)
BTW, I'm not sure but may be it'a be a good idea to use IGNORE
if (FreeBSD) OSVERSION < (say) 700037...
2. Apply the same tests for packages.
3. Bump PORTREVISION.
Enjoy. ;-)
2007-03-28 graphics/hobbes-icons-xpm: Archaic port
2007-04-10 japanese/firefox-ja: Incomplete pkg-plist
2007-04-10 japanese/lookup-xemacs: Does not install
2007-04-10 lang/linux-hla: Does not compile
2007-04-10 mail/vmailmgr: Incomplete pkg-plist
2007-04-10 multimedia/qvamps: Touches filesystem prior to 'make install'
2007-03-10 net-mgmt/sting: Broken on all supported versions of FreeBSD
2007-04-10 net-mgmt/tas: Incomplete pkg-plist
2007-04-10 net-p2p/verlihub-plugins: Does not configure, it needs at least verlihub 1.0
2007-04-10 news/inn-stable: Fails to patch
2007-04-10 palm/malsync: Does not build with new pilot-link
2007-04-10 russian/elm.language: Leaves behind files on deinstall
2007-04-10 russian/pine.language: Leaves behind config file on deinstall
2007-04-01 science/py-scipy03: Replaced by py-scipy
2007-04-10 security/php4-cryptopp: Does not compile
- Change IP binding algorithm: it is used both for the console and AUX port,
and not only in a mode hypervisor
PR: ports/111330
Submitted by: Pavel I Volkov <pol at opk.ru> (maintainer)
- PowerPC bugfixes:
- must clear carry bit when doing addic with a zero immediate value
- fix missing RETURN in micro-operation that would lead to random failures
and crashes
- add USE_PRECISE_EMULATION compilation-time option to choose between
getting exact floating point results and fast but less accurate computation.
- PowerPC improvments:
- add missing 64 bits rotate instructions
- safely define TARGET_PPCSPE when 64 bits registers are used
a separate target will be needed to use it in 32 bits mode on 32 bits hosts.
- MIPS: Fix enough FPU/R2 support to get 24Kf going.
- Add missing PowerPC 64 instructions
PowerPC 64 fixes.
- Upgrade Sparc FPU version (based on patch by Aurelien Jarno)
- One more bit of mips CPU configuration, and support for early 4KEc
which implemented only MIPS32R1. Thanks to Stefan Weil to insist he's
right on that. :-)
- Sparc32/64 CPU selection
- Fix segfault with -nographic, by Enache Adrian.
- New model for PowerPC CPU hardware interrupt events:
move all PowerPC specific code into target-ppc/helper.c to avoid polluting
the common code in cpu-exec.c. This makes implementation of new features
(ie embedded PowerPC timers, critical interrupts, ...) easier.
This also avoid hardcoding the IRQ callback in the OpenPIC controller,
making it more easily reusable and allowing cascading.
- Fix / update PowerPC BookE definitions.
- PPC: Fix rfi instruction: do not depend on current execution mode
but on the execution mode that will be effective after the return.
Add rfci, rfdi and rfmci for BookE PowerPC.
Extend mfdcr / mtdcr and implement mfdrcx / mtdcrx.
- Sanitize mips exception handling.
- Better fix for OpenPIC: should not depend on PowerPC.
- As embedded PowerPC TLB model is very different from PowerPC 6xx ones,
define ppc_tlb_t as an union of the two.
- Merge PowerPC 405 MMU model.
- Embedded PowerPC timers support.
- Support for PowerPC BookE exception model.
No need to requeue timer exceptions.
Fix nip saving for 64 bits PowerPC.
- Malta CBUS UART support.
- Fix usb hid and mass-storage protocol revision, by Juergen Keil.
- Update for binfmt_misc handler, by Stefan Weil.
- Large kernel initrd fix (initial patch by Daniel Jacobowitz).
- x86: Generate double and triple faults, by Bernhard Kauer.
- MIPS64 configurations.
- Actually enable 64bit configuration.
- Reorganise Sun4m to allow other machine types
- Add SparcStation-10 machine
- Improved initrd support for mips.
- Single mode for PIC i8259, by Bernhard Kauer.
- Qcow2 corruption fix, by Juergen Keil.
- VMware SVGA II emulation, by Andrzej Zaborowski.
- ne2k buffer full bug fix, by Marcel Block.
- Eepro100 emulation, by Stefan Weil.
- Qcow2: Release refcount table clusters after growing the refcount table,
by Juergen Keil.
- MIPS32R2 needs RDPGPR/WRPGPR instructions even when no shadow registers
are implemented.
- i386 return APIC ID with cpuid, by Bernhard Kauer.
- Infrastructure to support more than 2 MMU modes.
Add example for Alpha and PowerPC hypervisor mode.
- And some more bugfixes
Approved by: miwi (mentor, implicit)
- Support for Xcursor.
- A range of fixes for various installers.
- New builtin xcopy tool.
- The usual assortment of Direct3D fixes.
- Lots of bug fixes.
- Use SRPMS on MASTER_SITES just when PACKAGE_BUILDING is set [1]
- Bump PORTREVISION [1]
- Update src distfile as well
- Change pkg-plist file
PR: 110977 [1]
Submitted by: garga [1]
port may be used only with 7-CURRENT and compat.linux.osrelease=2.6.16.
To use/test the port (along with linux FC4 infrastructure ports) you
should do:
0. Backup all your vital information!
1. Remove the current linux base port.
2. Add to your /etc/make.conf "OVERRIDE_LINUX_BASE_PORT=fc6".
3. Make sure no linux application is running.
4. Set apropriate sysctl (compat.linux.osrelease=2.6.16).
5. Install emulation/linux_base-fc6.
5a. Those who use linux ports with automatic plist building should
apply the following patch:
ftp://mail.ipt.ru/pub/FreeBSD/patches/bsd.linux-rpm.mk-autoplist.diff
That should be enough at most circumstances. If you have difficulties,
please be sure to expand item 1 to:
1a. Remove all ports which depends on linux base port.
1b. Remove linux base port.
1c. Clean /compat/linux/ directory.
In case you want to get rid of the port, deinstall it, then return
back compat.linux.osrelease to 2.4.2 (as usual make sure that no
linux application is running) and remove from /etc/make.conf the line
containing the OVERRIDE_LINUX_BASE_PORT variable.
All questions, reports, suggestions etc. please route to
freebsd-emulation@.
Fedora Core 6 ports (FC6 infrastructure ports) are coming soon... ;-)
This port would not appear without netchild's help.
Thank you, Alexander!
- ARM reabbot support (orginal patch by Aurelien Jarno).
- SMP half-idle fix.
- Watchpoint support (previous commit got eaten by Savannah server crash).
- ARM register index+writeback fix (Lauro Ramos Venancio).
- PPC: Make it safe to use 64 bits GPR and/or 64 bits host registers.
For "symetry", add 64 bits versions of all modified functions.
As a side effect, add a lot of code provision for PowerPC 64 support.
Move overflow and carry checks in common routines for simple cases.
Add isel and popcntb instructions from PowerPC 2.03 specification.
Remove remaining micro-operations helpers prototypes from op.c.
Fix XER_BC field to be 7 bits long.
Add power management support for PowerPC 603 & 604.
Fix compilation warnings.
Add PowerPC 64 target for tests.
As no PowerPC 64 CPU is implemented, this target can just be used to
check that there is no difference between PowerPC 32 & PowerPC 64 used
in 32 bits mode.
- Allow disabling IDE block mode, by Carlo Marcelo Arenas Belon.
- Don't fail for "revert to poweron defaults" IDE command, by Carlo
Marcelo Arenas Belon.
- Better ioport debugging output.
- OHCI USB PXA support (Andrzej Zaborowski).
- MIPS -cpu selection support, by Herve Poussineau.
- PPC: As icbi is not a priviledge instruction and is treated as a load
by the MMU it needs to be implemented for every MMU translation mode.
- MIPS: Fix BD flag handling, cause register contents, implement some
more bits for R2 interrupt handling.
- A VGA card for the Malta board.
- SCSI fixes, by Wang Cheng Yeh.
- Add -name option, by Anthony Liguori.
- Improve -pidfile option, by Anthony Liguori.
- Close file descriptors when execing network tap setup script, by
Daniel P. Berrange.
- Fix qemu crash due to sparc division-by-zero, by Aurelien Jarno.
- Fix call to generated code on SPARC, by Juergen Keil.
- mips: Barf on branches/jumps in branch delay slots. Spotted by
Stefan Weil.
- VMMouse Emulation, by Anthony Liguori.
- SlavIO interrupt controller fix, by Aurelien Jarno.
- SlavIO Counter-Timers fix, by Aurelien Jarno.
- PowerPC 2.03 SPE extension - first pass.
- Fix Sparc branches, original patch by Aurelien Jarno
Approved by: miwi (mentor, implicit)
