1
0
mirror of https://git.FreeBSD.org/ports.git synced 2024-12-14 03:10:47 +00:00
Commit Graph

38 Commits

Author SHA1 Message Date
Martin Wilke
a14a33b009 - Stage support
- Convert svgfig to PYDISTUTILS_AUTOPLIST
2014-02-02 14:41:42 +00:00
Baptiste Daroussin
eb08c5441c Add NO_STAGE all over the place in preparation for the staging support (cat: graphics) 2013-09-20 18:35:44 +00:00
Eitan Adler
334eb0fc61 This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)
2013-03-19 13:04:30 +00:00
Christian Weisgerber
bcd6fbdee4 libogg.so.8: Bump PORTREVISION for ports that depend on libogg,
directly or indirectly (via libvorbis, libtheora).
2012-07-19 20:15:37 +00:00
Dirk Meyer
2b74a89bc8 - update png to 1.5.10 2012-06-01 05:26:28 +00:00
Dirk Meyer
e2c4065fa0 - build with giflib 2012-02-18 11:12:45 +00:00
Dmitry Marakasov
6f6fbe4bdf - Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav
2011-09-23 22:26:39 +00:00
Martin Wilke
63fe0cdb91 - Update to 1.7.0
PR:		158471
Submitted by:	Ports Fury
2011-07-02 07:37:38 +00:00
Baptiste Daroussin
84757dccba Make MASTER_SITES really point to the distfile
Reported by:	pointyhat (pav)
2011-03-18 19:58:49 +00:00
Baptiste Daroussin
03e5951deb update MASTER_SITES
while here remove MD5
2011-03-15 17:44:53 +00:00
Ade Lovett
4a8684e352 Sync to new bsd.autotools.mk 2010-12-04 07:34:27 +00:00
Christian Weisgerber
30587b71c2 Bump PORTREVISION for ports that depend on libogg, directly or indirectly
(via libvorbis, libtheora).
2010-06-06 20:44:03 +00:00
Dirk Meyer
de78af3ac5 - update to 1.4.1
Reviewed by:	exp8 run on pointyhat
Supported by:	miwi
2010-03-28 06:47:48 +00:00
Dirk Meyer
ca9c60461c - update to jpeg-8 2010-02-05 11:46:55 +00:00
Doug Barton
2fadfa2cfb For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.
2009-12-21 02:19:12 +00:00
Jeremy Messenger
789d75c728 -Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr
2009-08-02 19:36:34 +00:00
Dirk Meyer
3bbc108312 - update to jpeg7
Tested by:	pav on pointyhat
2009-07-18 11:11:29 +00:00
Christian Weisgerber
94d47b2ecd Bump PORTREVISION after libogg and libvorbisfile major version increment. 2009-07-06 21:25:59 +00:00
Rong-En Fan
741aa71483 Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)
2008-08-21 06:18:49 +00:00
Martin Wilke
3e4ed01146 - Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)
2008-04-19 17:56:05 +00:00
Martin Wilke
605b516239 - Chase increase of audio/libvorbis shlib version.
- Bump PORTREVISION
2007-07-28 12:27:31 +00:00
Florent Thoumie
d4f0d0048a - Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
2007-05-19 20:36:56 +00:00
Cheng-Lung Sung
10ddcca177 - s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:		ports/101916
Submitted by:	Gea-Suan Lin <gslin_AT_gslin dot org>
2006-08-14 23:06:39 +00:00
Ade Lovett
8503536d38 Conversion to a single libtool environment.
Approved by:	portmgr (kris)
2006-02-23 10:40:44 +00:00
Pav Lucistnik
792b758ef4 - Add SHA256 2005-11-26 01:48:16 +00:00
Ade Lovett
54a0b86543 Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
2005-11-15 06:52:12 +00:00
Volker Stolz
6d52710d20 Make share/Coin owned by simage; don't pick up simage.conf in Coin
Noticed by: krisbot
2005-10-19 18:25:24 +00:00
David E. O'Brien
c3d8037aeb At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
2005-04-12 03:26:56 +00:00
David E. O'Brien
f2fc2d60ae Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
2005-04-11 08:04:41 +00:00
Kirill Ponomarev
367a88c12e Update to version 1.6.1
PR:		ports/75400
Submitted by:	Ports Fury
2004-12-23 10:17:01 +00:00
Edwin Groothuis
8703e533e5 Clean up time for email addresses MIA!
If you know new email addresses for the people involved, please send-pr it!

<mcsi@agava.com>: host relay.agava.net.ru[195.161.118.3] said: 550
    <mcsi@agava.com>: User unknown in local recipient table (in reply to RCPT
    TO command)

<woju@bbsmail.ntu.edu.tw> (expanded from <woju@bbsmail>): Host or domain name
    not found. Name service error for name=bbsmail.ntu.edu.tw type=A: Host not
    found

<esoha@attbi.com>: host gateway.attbi.com[204.127.198.6] said: 551 not our
    customer (in reply to RCPT TO command)

<crow@nektor.hu>: host mail.kapu.hu[195.70.32.236] said: 550 unknown user (in
    reply to RCPT TO command)

<cyrilm@tower.pp.ru>: host mail.tower.pp.ru[213.85.109.133] said: 550 unknown
    user (in reply to RCPT TO command)

<ports@henrik-motakef.de>: Host or domain name not found. Name service error
    for name=henrik-motakef.de type=A: Host not found

<jj@nttmcl.com>: host mx1.nttmcl.com[216.69.64.132] said: 550 5.2.1
    <jj@nttmcl.com>... Mailbox disabled for this recipient (in reply to RCPT TO
    command)

<koji@jet.es>: host mx.wanadoo.es[62.81.235.75] said: 550 Relay not permitted /
    No such user (in reply to RCPT TO command)

<proot@iaces.com>: host horton.iaces.com[204.147.87.98] said: 550 5.1.1
    <proot@iaces.com>... User unknown (in reply to RCPT TO command)

<roland.jesse@gmx.net>: host mx0.gmx.net[213.165.64.100] said: 550 5.1.1
    {mx034} <roland.jesse@gmx.net>... User is unknown (in reply to RCPT TO
    command)

<vess@slavof.net>: host mail.slavof.net[213.130.68.146] said: 550 5.7.1 Access
    denied (in reply to MAIL FROM command)

<tuxsuximus@hotmail.com>: host mx3.hotmail.com[65.54.253.99] said: 550
    Requested action not taken: mailbox unavailable (in reply to RCPT TO
    command)

<zenin@archive.rhps.org>: host mail.rhps.org[66.250.128.137] said: 550 5.7.1
    <zenin@archive.rhps.org>... Relaying denied (in reply to RCPT TO command)
2004-10-25 13:39:57 +00:00
Joe Marcus Clarke
9e5632dd66 Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:		63944
Based on work by:eik and marcus
Approved by:	ade (autotools maintainer)
Tested by:	kris on pointyhat
Bound to be hidden problems:	You bet
2004-07-09 17:43:11 +00:00
Trevor Johnson
8232e82f85 SIZEify (maintainer timeout) 2004-03-31 03:12:58 +00:00
Ade Lovett
3f651573ad Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
2004-03-14 06:17:56 +00:00
Tilman Keskinoz
ab3181bd36 Update Maintainers emailaddress. Add --with-mpeg2enc to CONFIGURE_ARGS
PR:		48971
Submitted by:	maintainer
2003-05-09 11:31:57 +00:00
Akinori MUSHA
55850b547b De-pkg-comment. 2003-02-21 12:17:17 +00:00
Ying-Chieh Liao
ecedaa4486 add X dependence 2002-09-18 17:49:58 +00:00
Ying-Chieh Liao
de4e578ac2 add simape 1.2.2
Library with image format loaders and front-ends

PR:		37920
Submitted by:	Roland Jesse <jesse@cs.uni-magdeburg.de>
2002-09-18 14:01:03 +00:00