mirror/freebsd-ports
1
0
Fork 0
mirror of https://git.FreeBSD.org/ports.git synced 2024-10-30 21:49:25 +00:00
Code Issues Releases Activity
03030cf1ab
freebsd-ports/print/ghostscript6/Makefile
Nik Clayton 03030cf1ab Honour the NO_X variable, and don't try and build the X11 output formats, 
or depend on the X11 libraries, if it is set.

This should allow "make release" to work happily with the documentation
build again.

Approved by:	andreas (MAINTAINER)
2001-02-25 19:02:46 +00:00

305 lines
11 KiB
Makefile
Raw Blame History

# New ports collection makefile for: ghostscript
# Date created: Tue Jun 10 21:58:54 CEST 1997
# Whom: Andreas Klemm <andreas@klemm.gtn.com>
#
# $FreeBSD$
#
PORTNAME= ghostscript
PORTVERSION= 6.50
PORTREVISION= 3
CATEGORIES= print
MASTER_SITES= ftp://ftp.fh-koblenz.de/pub/Ghostscript/aladdin/gs650/ \
ftp://ftp.fh-koblenz.de/pub/Ghostscript/aladdin/fonts/ \
http://www.gelhaus.net/hp880c/1.4beta/ \
http://home.t-online.de/home/Martin.Lottermoser/pcl3dist/ \
http://www.harsch.net/Download/ \
http://www.ozemail.com.au/~geoffk/pdfencrypt/ \
ftp://download.sourceforge.net/pub/sourceforge/gimp-print/ \
http://download.sourceforge.net/ghostscript/ \
ftp://ftp.cs.wisc.edu/ghost/aladdin/fonts/ \
ftp://ftp.mirror.ac.uk/sites/ftp.cs.wisc.edu/ghost/aladdin/gs650/ \
ftp://ftp.mirror.ac.uk/sites/ftp.cs.wisc.edu/ghost/aladdin/fonts/ \
ftp://ftp.medasys-digital-systems.fr/pub/unix/ghostscript/aladdin/gs650/ \
ftp://ftp.medasys-digital-systems.fr/pub/unix/ghostscript/aladdin/fonts/ \
ftp://munnari.oz.au/ghost/aladdin/gs650/ \
ftp://munnari.oz.au/ghost/aladdin/fonts/ \
ftp://sunsite.cnlab-switch.ch/mirror/ghost/aladdin/gs650/ \
ftp://sunsite.cnlab-switch.ch/mirror/ghost/aladdin/fonts/
# note: russian mirror isn't up to date
DISTFILES= ${GS_SOURCES} ${GS_FONTS_STD} ${GS_FONTS_OTHER} \
${DECRYPT_PDF} ${HP8XX_DRV} ${HPDJ_SRC} ${PCL3_SRC} \
${HP970_DRV} ${GPRINT_SRC}
EXTRACT_ONLY= ${GS_SOURCES}
MAINTAINER= andreas@FreeBSD.org
BUILD_DEPENDS= ${NONEXISTENT}:${PORTSDIR}/graphics/jpeg:extract
LIB_DEPENDS= png.4:${PORTSDIR}/graphics/png
WRKSRC= ${WRKDIR}/gs${PORTVERSION}
ALL_TARGET= all pcl3opts escputil
.if !defined(NO_X)
USE_XLIB= yes
.else
# XXX Hack. If you've done something like "-DNO_X" on the command line
# (instead of NO_X=true, or similar) gmake won't pick it up. So make sure
# that NO_X is defined *and* has a value.
MAKE_ENV+= NO_X=true
.endif
USE_GMAKE= yes
MAKEFILE= src/unix-gcc.mak
PLIST_SUB= GS_VERSION=${PORTVERSION}
# Note: the order that the manpages are listed here matters because
# some of them are symbolic links
MAN1= gs.1 dvipdf.1 font2c.1 eps2eps.1 gsbj.1 gsdj.1 gsdj500.1 \
gslj.1 gslp.1 gsnd.1 pdf2dsc.1 pdfopt.1 pdf2ps.1 pf2afm.1 \
pfbtopfa.1 printafm.1 ps2ascii.1 ps2epsi.1 ps2pdf12.1 \
ps2pdf13.1 ps2pdf.1 ps2pdfwr.1 ps2ps.1 wftopfa.1 \
gs-hpdj.1 gs-pcl3.1 pcl3opts.1 escputil.1
GS_SOURCES= ghostscript-${PORTVERSION}.tar.gz
# Note: the following two are real files that have symlinks with
# later version numbers pointing to them. To avoid unnecessarily
# downloading distfiles, do not change these when upgrading the port
# unless the files really change.
GS_FONTS_STD= ghostscript-fonts-std-6.0.tar.gz
GS_FONTS_OTHER= ghostscript-fonts-other-6.0.tar.gz
# Additional Drivers:
# Ghostscript Driver for HP DeskJet 812C/815C/832C/880C/882C/895C
# http://www.gelhaus.net/hp880c/
# driver names: cdj880
HP8XX_DRV= gdevcd8.tar.gz
# HPDJ, additional driver for HP PCL3 Printers, by Martin Lottermoser
# ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/pcl3.html
HPDJ= hpdj
HPDJ_VERS= 2.6
HPDJ_NAME= ${HPDJ}-${HPDJ_VERS}
HPDJ_SRC= ${HPDJ_NAME}.tar.gz
HPDJ_MAN1= gs-hpdj.1
# PCL3 (hpdj successor in BETA state)
# additional driver for HP PCL3 Printers, by Martin Lottermoser
# http://home.t-online.de/home/Martin.Lottermoser/pcl3.html
PCL3= pcl3
PCL3_VERS= 3.0.2
PCL3_NAME= ${PCL3}-${PCL3_VERS}
PCL3_SRC= ${PCL3_NAME}.tar.gz
PCL3_MAN1= gs-pcl3.1 pcl3opts.1
# additional driver for HP DeskJet 970, supports duplex printing
HP970_DRV= gdevdj9.c.gz
# gimp-print - very high quality driver for Epson, HPs,...
# http://sourceforge.net/projects/gimp-print/
GPRINT= print
GPRINT_DESC= gimp-${GPRINT}
GPRINT_VERS= 4.0.4
GPRINT_NAME= ${GPRINT}-${GPRINT_VERS}
GPRINT_SRC= ${GPRINT_NAME}.tar.gz
GPRINT_MAN1= escputil.1
# contributed uniprint profiles
CONTRIB_UPP= lqx70ch.upp lqx70cl.upp lqx70cm.upp \
stc740ih.upp stc740p.upp stc740pl.upp
# replacement for pdf_sec.ps, that allows you to read encrypted PDF files
DECRYPT_PDF= pdf_sec.ps
.if defined(A4)
CFLAGS+= -DA4
.endif
pre-fetch:
.if !defined(A4)
@${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation."
.else
@${ECHO_MSG} "Using -DA4 for compilation."
.endif
post-extract:
@${ECHO} ">>> in post-extract ..."
@${LN} -s ${WRKDIRPREFIX}${.CURDIR}/../../graphics/jpeg/work/jpeg-6b \
${WRKSRC}/jpeg
# ** 3rd party driver **
# Note: don't forget to add those devices in scripts/configure and
# configure.batch, which update unix-gcc.mak to build gs with these
# new devices !
#
# for HP8XX driver
@${ECHO} ">>> extracting ${HP8XX_DRV} ..."
@${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${HP8XX_DRV}
# for HPDJ driver
@${ECHO} ">>> extracting ${HPDJ_SRC} ..."
@${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${HPDJ_SRC}
@${TAR} -C ${WRKSRC}/src -xf ${WRKSRC}/${HPDJ_NAME}/${HPDJ}.tar
# for PCL3 driver
@${ECHO} ">>> extracting ${PCL3_SRC} ..."
@${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${PCL3_SRC}
@${LN} -s ${PCL3_NAME} ${WRKSRC}/pcl3
@${TAR} -C ${WRKSRC}/${PCL3_NAME} -xf \
${WRKSRC}/${PCL3_NAME}/${PCL3}.tar
# for HP DeskJet 970 driver
@${ECHO} ">>> extracting ${HP970_DRV} ..."
@${CP} ${DISTDIR}/${HP970_DRV} ${WRKSRC}/src
@${GUNZIP_CMD} ${WRKSRC}/src/${HP970_DRV}
# for gimp-print
@${ECHO} ">>> extracting ${GPRINT_SRC} ..."
@${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${GPRINT_SRC}
# here we apply unofficial patches from 3rd party drivers
post-patch:
# from PCL3 driver
@${ECHO} ">>> in post-patch ..."
@${ECHO} ">>> applying patches from ${PCL3} ..."
@${PATCH} -d ${WRKSRC}/src --forward --quiet -E \
< ${WRKSRC}/${PCL3_NAME}/src/zmedia2.c-6.01.diff
# here we apply the modifications necessary to build the 3rd party drivers
# advantage: you see unmodified makefiles after a pure make extract
pre-configure:
@${ECHO} ">>> in pre-configure ..."
# for HPDJ driver
@${ECHO} ">>> adding ${HPDJ} driver to contrib.mak ..."
@${CAT} ${WRKSRC}/src/contrib.mak-5.94.add \
>> ${WRKSRC}/src/contrib.mak
# for PCL3 driver
@${ECHO} ">>> adding ${PCL3} driver to contrib.mak ..."
@${CAT} ${WRKSRC}/${PCL3_NAME}/src/contrib.mak-6.01.add \
>> ${WRKSRC}/src/contrib.mak
# for HP DeskJet 970 driver
@${ECHO} ">>> adding DJ970 driver to contrib.mak ..."
@${CAT} ${FILESDIR}/dj970.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
# for gimp-print
@${ECHO} ">>> creating symlinks for ${GPRINT_DESC} ..."
@${LN} -s ${WRKSRC}/${GPRINT_NAME}/Ghost/*.[ch] \
${WRKSRC}/src
@${ECHO} ">>> adding ${GPRINT_DESC} driver to contrib.mak ..."
@${CAT} ${WRKSRC}/${GPRINT_NAME}/Ghost/contrib.mak.addon \
>> ${WRKSRC}/src/contrib.mak
@${ECHO} ">>> adding make rules for escputil to contrib.mak ..."
@${CAT} ${FILESDIR}/escputil.contrib.mak \
>> ${WRKSRC}/src/contrib.mak
do-configure:
@${ECHO} ">>> in do-configure ..."
.if defined(BATCH)
@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure.batch
.else
# XXX diable dialog based configure, needs some rework later...
#@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure
@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure.batch
.endif
pre-build:
@${ECHO} ">>> in pre-build ..."
@${ECHO} ">>> creating directories for compilation ..."
@${MKDIR} ${WRKSRC}/obj
@${MKDIR} ${WRKSRC}/bin
pre-install:
@${ECHO} ">>> in pre-install ..."
@${ECHO} ">>> creating ghostscript destdir ..."
@${MKDIR} ${PREFIX}/share/ghostscript
@${ECHO} ">>> extracting ghostscript fonts..."
@${TAR} -C ${PREFIX}/share/ghostscript -xzf ${DISTDIR}/${GS_FONTS_STD}
@${TAR} -C ${PREFIX}/share/ghostscript -xzf ${DISTDIR}/${GS_FONTS_OTHER}
post-install:
@${ECHO} ">>> in post-install ..."
@${ECHO} ">>> stripping gs ..."
@strip ${PREFIX}/bin/gs
@${ECHO} ">>> installing additional scripts ..."
@${INSTALL_SCRIPT} ${WRKSRC}/lib/unix-lpr.sh ${PREFIX}/bin
@${INSTALL_SCRIPT} ${WRKSRC}/lib/lprsetup.sh ${PREFIX}/bin
# for HPDJ driver
@${ECHO} ">>> installing ${HPDJ} manpages ..."
.for i in ${HPDJ_MAN1}
@${INSTALL_MAN} ${WRKSRC}/src/${i} ${PREFIX}/man/man1
.endfor
@${ECHO} ">>> creating ${HPDJ} destdir ..."
@${MKDIR} ${PREFIX}/share/ghostscript/${PORTVERSION}/hpdj
@${ECHO} ">>> installing files in ${HPDJ} destdir ..."
.for i in README.hpdj example.mdf margins-A4.ps margins-A4Rotated.ps \
margins-Letter.ps margins-LetterRotated.ps
@${INSTALL_DATA} ${WRKSRC}/src/${i} \
${PREFIX}/share/ghostscript/${PORTVERSION}/hpdj
.endfor
# for PCL3 driver
@${ECHO} ">>> installing ${PCL3} manpages ..."
.for i in ${PCL3_MAN1}
@${INSTALL_MAN} ${WRKSRC}/${PCL3_NAME}/doc/${i} ${PREFIX}/man/man1
.endfor
# other pcl3 stuff, which might be interesting for runtime
@${ECHO} ">>> creating ${PCL3} destdir ..."
@${MKDIR} ${PREFIX}/share/ghostscript/${PORTVERSION}/pcl3
@${ECHO} ">>> installing files in ${PCL3} destdir ..."
.for i in BETA BUGS README lib/example.mcf lib/if-pcl3 ps/calign.ps \
ps/dumppdd.ps ps/levels-test.ps ps/margins-A4.ps \
ps/margins-A4Rotated.ps ps/margins-Env10Rotated.ps \
ps/margins-EnvDLRotated.ps ps/margins-Letter.ps \
ps/margins-LetterRotated.ps
@${INSTALL_DATA} ${WRKSRC}/${PCL3_NAME}/${i} \
${PREFIX}/share/ghostscript/${PORTVERSION}/pcl3
.endfor
# for gimp-print driver
@${ECHO} ">>> installing ${GPRINT_DESC} escputil in bindir ..."
@${INSTALL_PROGRAM} ${WRKSRC}/src/escputil ${PREFIX}/bin
@${ECHO} ">>> stripping ${GPRINT_DESC} escputil ..."
@strip ${PREFIX}/bin/escputil
@${ECHO} ">>> installing ${GPRINT_DESC} manpages ..."
.for i in ${GPRINT_MAN1}
@${INSTALL_MAN} ${WRKSRC}/${GPRINT_NAME}/Ghost/${i} \
${PREFIX}/man/man1
.endfor
@${ECHO} ">>> creating ${GPRINT_DESC} destdir ..."
@${MKDIR} ${PREFIX}/share/ghostscript/${PORTVERSION}/gimp-print
@${ECHO} ">>> installing files in gimp-print destdir ..."
.for i in README
@${INSTALL_DATA} ${WRKSRC}/${GPRINT_NAME}/Ghost/${i} \
${PREFIX}/share/ghostscript/${PORTVERSION}/gimp-print
.endfor
# contributed UPP driver
@${ECHO} ">>> installing contributed UPP profiles ..."
.for i in ${CONTRIB_UPP}
@${INSTALL_DATA} ${FILESDIR}/${i} \
${PREFIX}/share/ghostscript/${PORTVERSION}/lib
.endfor
# for reading encrypted PDFs
@${ECHO} ">>> installing support for encrypted PDF files ..."
@${INSTALL_DATA} ${DISTDIR}/${DECRYPT_PDF} \
${PREFIX}/share/ghostscript/${PORTVERSION}/lib
#
# now NOPORTDOCS dependend stuff
#
.if !defined(NOPORTDOCS)
@${ECHO} ">>> installing PORTDOC stuff ..."
# install hpdj docu, not necessary for runtime
# note: old hpdj driver has its files in ${WRKSRC}/src
@${ECHO} ">>> creating ${HPDJ} docu destdir ..."
@${MKDIR} ${PREFIX}/share/doc/ghostscript/${PORTVERSION}/hpdj
@${ECHO} ">>> installing files in ${HPDJ} docu destdir ..."
.for i in LGPL.txt NEWS hpdj.html
@${INSTALL_DATA} ${WRKSRC}/src/${i} \
${PREFIX}/share/doc/ghostscript/${PORTVERSION}/hpdj
.endfor
# install pcl3 docu, not necessary for runtime
# note: new pcl3 driver has a subdir of its own
@${ECHO} ">>> creating ${PCL3} docu destdir ..."
@${MKDIR} ${PREFIX}/share/doc/ghostscript/${PORTVERSION}/pcl3
@${ECHO} ">>> installing files in ${PCL3} docu destdir ..."
.for i in LGPL NEWS doc/gs-pcl3.html doc/how-to-report.txt doc/pcl3opts.html
@${INSTALL_DATA} ${WRKSRC}/${PCL3_NAME}/${i} \
${PREFIX}/share/doc/ghostscript/${PORTVERSION}/pcl3
.endfor
.endif
@${ECHO} "> post-installation tasks completed."
.include <bsd.port.mk>
Reference in New Issue View Git Blame Copy Permalink